S3370 IMEI not active- after resurrection, can't flash

[Riteshgpt60]

Hi,
I'm a new user of riff,

S3370 "IMEI not active" not solve by any method,

I did resurrection and now it can't flash,

i put the phone in download mode and while flashing with multiloader, it shows

error like ERROR Rsrc2 ...

with boot file or without boot file!!

i changed the firmware/tried with fully charged battery too but got same

problem,

any soution?

thanks for help

br,

[diman2006]

Hi first boot repair after again flashing phone after imei write your problem solved

[Riteshgpt60]

Need full dump for this phone,

I heard that riff can flash full dump with IMEI,

as it can't flash with multiloader!!!

need solution

[Riteshgpt60]

again , a new problem,

after resurrection ,

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.28, JTAG Manager Version: 1.29
Selected Resurrector: [Samsung S3370]

Connecting to the dead body...OK
Detected dead body ID: 0x4015F0E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BA (256MB)
Flashing the dead body...OK
Resurrection complete!

phone shows pink display, while power on,

Pc can't detect the phone, can't flash!!,

how to revive

[syed jewel]

Originally Posted by Riteshgpt60

Hi,
I'm a new user of riff,

S3370 "IMEI not active" not solve by any method,

I did resurrection and now it can't flash,

i put the phone in download mode and while flashing with multiloader, it shows

error like ERROR Rsrc2 ...

with boot file or without boot file!!

i changed the firmware/tried with fully charged battery too but got same

problem,

any soution?

thanks for help

br,

i have same problem this model now my hand boot repair after can't flash any file

[evasoft]

1-full erase
2-resurect.
3-flash with multiloader
4-repair imxx with spt

[Riteshgpt60]

Originally Posted by evasoft

1-full erase
2-resurect.
3-flash with multiloader
4-repair imxx with spt

Hi,
i did Erase and Resurrection but P.C doesn't detect the phone it shows pink

display while power on,

Erase-

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.28, JTAG Manager Version: 1.29
Selected Resurrector: [Samsung S3370]

Connecting to the dead body...OK
Detected dead body ID: 0x4015F0E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BA (256MB)

Erasing FLASH1 memory from 0x00000000 to 0x0FFFFFFF...OK
Completed in 00:00:04.134 (Average Transfer Rate: 63411.71 kB/s)

how to solve?


Resurrection--

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.28, JTAG Manager Version: 1.29
Selected Resurrector: [Samsung S3370]

Connecting to the dead body...OK
Detected dead body ID: 0x4015F0E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BA (256MB)
Flashing the dead body...OK
Resurrection complete!