S5230 flashing dead body stop at 22% - GSM-Forum

rea1One · 03-27-2011, 09:27

flashing dead body stop at 22%

is it hardware (chip) problem?

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.21, JTAG Manager Version: 1.28
Selected Resurrector: [Samsung S5230]

Connecting to the dead body...OK
Detected dead body ID: 0x07926F0F - CORRECT!
Set I/O Voltage reads as 3.01V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x00BA (256MB)
Flashing the dead body...
ERROR: DCC Loader has reported Error Code = 0x22 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x22 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x22 (0x000000). Trying to recover...OK
ERROR: Stopped due to multiple communication errors. Terminating at 0x00000000

galijus · 03-27-2011, 10:03

check again wires and use lower speed (4 mhz).

rea1One · 03-27-2011, 10:12

i triple check the wire connections and try all speed from the very slow to max

same error stop at 22%

rea1One · 03-30-2011, 05:24

many posts with their problem in the past few days

but no one product supporter answering...

**legija** · 03-30-2011, 11:48

ERR_WRONG_CRC32 0x22

So You have there communication problem. If I remember well, some users had such problems with Kaspersky AV.
In any case - my advice is to recheck phone power, soldering and cables, and of course disable all running programs.

basem_zeini · 03-30-2011, 15:29

Quote:

Originally Posted by legija

ERR_WRONG_CRC32 0x22

So You have there communication problem. If I remember well, some users had such problems with Kaspersky AV.
In any case - my advice is to recheck phone power, soldering and cables, and of course disable all running programs.

this is true it is communication problem
you are losing connection for a while
check wires connections

03-27-2011, 09:27	#1 (permalink)
rea1One No Life Poster Join Date: Feb 2006 Location: EDSELLULAR Posts: 1,569 Member: 236564 Status: Offline Sonork: 100.1667122 Thanks Meter: 816	S5230 flashing dead body stop at 22% flashing dead body stop at 22% is it hardware (chip) problem? Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.21, JTAG Manager Version: 1.28 Selected Resurrector: [Samsung S5230] Connecting to the dead body...OK Detected dead body ID: 0x07926F0F - CORRECT! Set I/O Voltage reads as 3.01V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x00BA (256MB) Flashing the dead body... ERROR: DCC Loader has reported Error Code = 0x22 (0x000000). Trying to recover...OK ERROR: DCC Loader has reported Error Code = 0x22 (0x000000). Trying to recover...OK ERROR: DCC Loader has reported Error Code = 0x22 (0x000000). Trying to recover...OK ERROR: Stopped due to multiple communication errors. Terminating at 0x00000000

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need to flash 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	08-16-2019 19:37
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
5110 flash new software , need help	steve	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	01-03-2015 05:41
SIMCLOCK-STOP	bobby	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	03-20-2000 03:02

03-27-2011, 10:03	#2 (permalink)
galijus No Life Poster Join Date: Oct 2009 Location: serbia Age: 44 Posts: 971 Member: 1131244 Status: Offline Sonork: 100.1596724 Thanks Meter: 376	check again wires and use lower speed (4 mhz).

03-27-2011, 10:12	#3 (permalink)
rea1One No Life Poster Join Date: Feb 2006 Location: EDSELLULAR Posts: 1,569 Member: 236564 Status: Offline Sonork: 100.1667122 Thanks Meter: 816	i triple check the wire connections and try all speed from the very slow to max same error stop at 22%

03-30-2011, 05:24	#4 (permalink)
rea1One No Life Poster Join Date: Feb 2006 Location: EDSELLULAR Posts: 1,569 Member: 236564 Status: Offline Sonork: 100.1667122 Thanks Meter: 816	many posts with their problem in the past few days but no one product supporter answering...

03-30-2011, 11:48	#5 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	ERR_WRONG_CRC32 0x22 So You have there communication problem. If I remember well, some users had such problems with Kaspersky AV. In any case - my advice is to recheck phone power, soldering and cables, and of course disable all running programs.