S5250 no resurrection - GSM-Forum

gilica_gsm · 04-23-2014, 12:30

hy
S5250 can't resurrection, phone dead after somebody tried to reflash phone,
now riff soft read dump flash
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [Samsung S5250 V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x07926F0F - CORRECT!
Set I/O Voltage reads as 3.00V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Selected Resurrection Data for the NAND Chip with Page size = 4KB

Flashing the dead body...
ERROR: DCC Loader has reported Error Code = 0x2E (0x000000). Trying to recover...FAILED
ERROR: Failed due to multiple communication errors. Terminating at 0x000000000000

put also 1mgh, the same
how resurrection this phone?
thx

.::TEJARAM::. · 04-23-2014, 13:42

Select "TCK" Speed at 6 or 8 MHZ(Not RTCK Speed)

Please Check Connection And Power And USB Cable,Also You Can Hold Power ON Key

http://faq.riffbox.org/index.php?sid...=60&artlang=en

gilica_gsm · 04-24-2014, 11:01

hy
phone resurection done but can't flashing phone, phone in download mode, write abt 15-25% and error
please full dump file for write with riffbox

thx

04-23-2014, 12:30	#1 (permalink)
gilica_gsm No Life Poster Join Date: Oct 2004 Location: Romania, Bistrita Age: 70 Posts: 856 Member: 85467 Status: Offline Thanks Meter: 104	S5250 no resurrection hy S5250 can't resurrection, phone dead after somebody tried to reflash phone, now riff soft read dump flash Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.55 Selected Resurrector: [Samsung S5250 V1.00] Connecting to the dead body...OK Detected dead body ID: 0x07926F0F - CORRECT! Set I/O Voltage reads as 3.00V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB) Selected Resurrection Data for the NAND Chip with Page size = 4KB Flashing the dead body... ERROR: DCC Loader has reported Error Code = 0x2E (0x000000). Trying to recover...FAILED ERROR: Failed due to multiple communication errors. Terminating at 0x000000000000 put also 1mgh, the same how resurrection this phone? thx

04-23-2014, 13:42	#2 (permalink)
.::TEJARAM::. No Life Poster Join Date: Nov 2011 Location: .::INDIA::. Age: 35 Posts: 3,459 Member: 1681461 Status: Offline Sonork: [OFFLINE] Thanks Meter: 1,011	Select "TCK" Speed at 6 or 8 MHZ(Not RTCK Speed) Please Check Connection And Power And USB Cable,Also You Can Hold Power ON Key http://faq.riffbox.org/index.php?sid...=60&artlang=en

04-24-2014, 11:01	#3 (permalink)
gilica_gsm No Life Poster Join Date: Oct 2004 Location: Romania, Bistrita Age: 70 Posts: 856 Member: 85467 Status: Offline Thanks Meter: 104	hy phone resurection done but can't flashing phone, phone in download mode, write abt 15-25% and error please full dump file for write with riffbox thx