S5260 Resurrection write was interrupted - GSM-Forum

meisam · 09-07-2011, 23:41

Dear supporters
I damaged this set when i was flashing the phone for LP change.Now wires well-soldered and connection is ok but i get the error yuo can see in the picture below.

I got two options afterward: Start new and Continue.I get the same error as you in the log below:

Code:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [Samsung S5260]

Connecting to the dead body...OK
Detected dead body ID: 0x07926F0F - CORRECT!
Set I/O Voltage reads as 3.01V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0040 (256MB)
Selected Resurrection Data for the NAND Chip with Page size = 2KB

Flashing the dead body...
ERROR: DCC Loader has reported Error Code = 0x2E (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x2E (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x2E (0x000000). Trying to recover...OK
ERROR: Stopped due to multiple communication errors. Terminating at 0x0000000000

What's the matter and how can i recover it please?

meisam · 09-09-2011, 11:01

Hope supporters would have helped me,i have to pay the phone to customer ;(

menamobys · 09-09-2011, 18:15

Make you sure to last update box and Try again

meisam · 09-10-2011, 08:55

Quote:

Originally Posted by menamobys

Make you sure to last update box and Try again

hi
i update the box but problem not solved

plz hepl me !!!

**legija** · 09-10-2011, 09:30

Have You tried to set RTCK to lower value, for example 1MHz ?
Resurrection help clearly says that.

tsarkh · 09-10-2011, 09:49

i fix one S5260 with low speed and no errors but after that the phone has no IMEI and need imei fix or hang on logo

Share If U Care

Blondi · 09-10-2011, 11:37

just press on power 100% worcking ! riff best box

meisam · 09-10-2011, 15:02

Quote:

Originally Posted by legija

Have You tried to set RTCK to lower value, for example 1MHz ?
Resurrection help clearly says that.

Quote:

Originally Posted by Blondi

just press on power 100% worcking ! riff best box

this is not worked.

plz hepl me !!!

Blondi · 09-26-2011, 23:10

connect the phone 1 resurrection 2 press and hold power button .

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
read eeprom write eeprom, what do i need?	jonthe	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	12-08-2010 06:24
Somebody was used 5110-529.fls, 5110-529B.fls files (+)	SashaM	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	01-16-2001 10:06
5110/6110 after unlocking see only network to which it was locked and ...	2M	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	07-25-2000 00:51
My site was moved to telever.bizland.com	Bert	GSM Mobile Links	0	01-17-2000 16:21

09-09-2011, 11:01	#2 (permalink)
meisam No Life Poster Join Date: Feb 2005 Location: IRAN(land of heros) Age: 44 Posts: 2,680 Member: 115172 Status: Offline Thanks Meter: 212	Hope supporters would have helped me,i have to pay the phone to customer ;(

09-09-2011, 18:15	#3 (permalink)
menamobys Insane Poster Join Date: Apr 2008 Posts: 82 Member: 757723 Status: Offline Sonork: 100.1587101 Thanks Meter: 188	Make you sure to last update box and Try again

09-10-2011, 09:30	#5 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	Have You tried to set RTCK to lower value, for example 1MHz ? Resurrection help clearly says that.

09-10-2011, 09:49	#6 (permalink)
tsarkh No Life Poster Join Date: Jul 2005 Location: France Age: 48 Posts: 6,857 Member: 165812 Status: Offline Sonork: 100:1627635 Thanks Meter: 4,267	i fix one S5260 with low speed and no errors but after that the phone has no IMEI and need imei fix or hang on logo Share If U Care

09-10-2011, 11:37	#7 (permalink)
Blondi Junior Member Join Date: Apr 2005 Age: 46 Posts: 33 Member: 134852 Status: Offline Sonork: 100.1603594 Thanks Meter: 1	just press on power 100% worcking ! riff best box

09-26-2011, 23:10	#9 (permalink)
Blondi Junior Member Join Date: Apr 2005 Age: 46 Posts: 33 Member: 134852 Status: Offline Sonork: 100.1603594 Thanks Meter: 1	connect the phone 1 resurrection 2 press and hold power button .