s5360 galaxy y error nee help pls..

[haslyn]

[abuqatadh]

select low speed like 1 mhz if it didn't work try 100 khz

[haslyn]

Originally Posted by abuqatadh

select low speed like 1 mhz if it didn't work try 100 khz

same problem bro...............

[BABAK NURI]

Hi

1-make sure about connection and select 8 Or 6 Mhz Speed
2-put battrey or connect power supply
3-no need USB
4-Hold Power On key and press resurrect...(need hold power key during resurrect)

http://faq.riffbox.org/index.php?act...m+the+RIFF+Box.

[haslyn]

Originally Posted by BABAK NURI

Hi

1-make sure about connection and select 8 Or 6 Mhz Speed
2-put battrey or connect power supply
3-no need USB
4-Hold Power On key and press resurrect...(need hold power key during resurrect)

same problem master BABAK NURI

[haslyn]

Originally Posted by BABAK NURI

Hi

1-make sure about connection and select 8 Or 6 Mhz Speed
2-put battrey or connect power supply
3-no need USB
4-Hold Power On key and press resurrect...(need hold power key during resurrect)

same problem bro

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Samsung S5360 V1.0.4443.1900]

Connecting to the dead body...OK
Detected dead body ID: 0x07B3617F - CORRECT!
Set I/O Voltage reads as 3.00V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 8 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...ERROR
ERROR: No response from the RIFF Box.


6 Mhz

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Samsung S5360 V1.0.4443.1900]

Connecting to the dead body...OK
Detected dead body ID: 0x07B3617F - CORRECT!
Set I/O Voltage reads as 3.00V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 6 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...ERROR
ERROR: No response from the RIFF Box.

[haslyn]

the reason of this is i updated it to odin then it stop to boat loader & now totally dead. when i repair to riffbox always error. big thanks help me pls.