S5570 problem to full repair phone

[Parker25]

[2012-05-29 14:15:29] [START OPERATION_ID = 23]
[2012-05-29 14:15:34] Open serial port...OK
[2012-05-29 14:15:34] Connecting to the RIFF Box...OK
[2012-05-29 14:15:34] Firmware Version: 1.32, JTAG Manager Version: 1.43
[2012-05-29 14:15:34] Selected Resurrector: [Samsung S5570 V1.00]
[2012-05-29 14:15:34] 
[2012-05-29 14:15:34] Connecting to the dead body...OK
[2012-05-29 14:15:34] Detected dead body ID: 0x303C10E1 - CORRECT!
[2012-05-29 14:15:34] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
[2012-05-29 14:15:34] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[2012-05-29 14:15:34] Settings Code: 0x27010000000000000000000020000000
[2012-05-29 14:15:34] 
[2012-05-29 14:15:34] Resurrection sequence started.
[2012-05-29 14:15:34] Establish communication with the phone...OK
[2012-05-29 14:15:34] Initializing internal hardware configuration...OK
[2012-05-29 14:15:34] Uploading resurrector data into memory...OK
[2012-05-29 14:15:34] Starting communication with resurrector...OK
[2012-05-29 14:15:34] 
[2012-05-29 14:15:34] Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
[2012-05-29 14:15:34] 
[2012-05-29 14:15:34] Writting FLASH1 memory from 0x000000000000 to 0x00001FFFFFFF
[2012-05-29 14:15:34] WARNING: Programming Error (0x24) at 0x0000011C0000 is Ignored.
[2012-05-29 14:15:34] ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK
[2012-05-29 14:15:34] ERROR: DCC Loader has reported Error Code = 0x22 (0x000000). Trying to recover...OK
[2012-05-29 14:15:34] WARNING: Programming Error (0x24) at 0x000010000000 is Ignored.
[2012-05-29 14:15:34] ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK
[2012-05-29 14:15:34] WARNING: Programming Error (0x24) at 0x000016A40000 is Ignored.
[2012-05-29 14:15:34] WARNING: Programming Error (0x24) at 0x0000185C0000 is Ignored.
[2012-05-29 14:15:34] WARNING: Programming Error (0x24) at 0x00001F800000 is Ignored.
[2012-05-29 14:15:34] Completed in 01:12:42.328 (Average Transfer Rate: 123.94 kB/s)
[2012-05-29 14:15:34] [FINISH OPERATION_ID = 23]

After that i flash phone file GT-S5570_XEO_S5570XWKTH_S5570OXXKT9_S5570XWKT4 and see only logo samsung when try write version S5570XXJL9 phone have download mode i see in screen but screen is blank when try power on.
If try write ARM11boot_GT-S5570.tar phone is dead not download mode i must ressurect again erase flash and write file S5570_full_first and have download mode by jig usb.
It is possible repair this phone. Mayby phone have hardware problem ??