s5830 error in resurrection-help - GSM-Forum

zone3 · 07-05-2013, 15:58

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [Samsung S5830 V1.0.4860.51697]

Connecting to the dead body...OK
Detected dead body ID: 0x203C00E1 - IGNORED!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz]

Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR(0x46): Communication is not established. Terminating.

why above error-pinout solderings r ok.

helppppp

zozo2 · 07-05-2013, 17:31

Quote:

Originally Posted by zone3

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [Samsung S5830 V1.0.4860.51697]

Connecting to the dead body...OK
Detected dead body ID: 0x203C00E1 - IGNORED!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz]

Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR(0x46): Communication is not established. Terminating.

why above error-pinout solderings r ok.

helppppp

Try to use various speed maybe it can help

BABAK NURI · 07-06-2013, 10:57

Hi

Just Set Speed At TCK 8MHZ
Put USB Cable and Start Resurrection But Don't Forget Double Check Soldered JTAG Wires

shachash · 07-09-2013, 10:45

also make sure battery is full and also try pressing power all the time

Sagitarious · 08-31-2013, 08:30

I have 1 s5830 before it was go in dm, but when i make software with odin, its dead now and not go in dm. when i make GTAG from RIFF its gave me following Error:-

Connecting to the dead body...OK
Detected dead body ID: 0x203C10E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is 12 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...FAILED
ERROR: RAM memory selftest failed.

Please help me in this mater Thanks.

BABAK NURI · 08-31-2013, 22:38

Quote:

Originally Posted by Sagitarious

I have 1 s5830 before it was go in dm, but when i make software with odin, its dead now and not go in dm. when i make GTAG from RIFF its gave me following Error:-

Connecting to the dead body...OK
Detected dead body ID: 0x203C10E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is 12 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...FAILED
ERROR: RAM memory selftest failed.

Please help me in this mater Thanks.

Hi
Please Read:RIFF JTAG Box FAQ - ERROR: RAM memory selftest failed.

07-05-2013, 15:58	#1 (permalink)
zone3 No Life Poster Join Date: Jan 2009 Posts: 3,260 Member: 946381 Status: Offline Thanks Meter: 150	s5830 error in resurrection-help Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.35, JTAG Manager Version: 1.49 Selected Resurrector: [Samsung S5830 V1.0.4860.51697] Connecting to the dead body...OK Detected dead body ID: 0x203C00E1 - IGNORED! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz] Resurrection sequence started. Establish communication with the phone...FAILED ERROR(0x46): Communication is not established. Terminating. why above error-pinout solderings r ok. helppppp

07-06-2013, 10:57	#3 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 43 Posts: 7,259 Member: 131131 Status: Offline Sonork: 100.1606847 Thanks Meter: 4,475	Hi Just Set Speed At TCK 8MHZ Put USB Cable and Start Resurrection But Don't Forget Double Check Soldered JTAG Wires

07-09-2013, 10:45	#4 (permalink)
shachash No Life Poster Join Date: Feb 2004 Age: 48 Posts: 699 Member: 51905 Status: Offline Thanks Meter: 41	also make sure battery is full and also try pressing power all the time

08-31-2013, 08:30	#5 (permalink)
Sagitarious No Life Poster Join Date: Oct 2007 Location: Saudi Arabia Posts: 1,553 Member: 615730 Status: Offline Thanks Meter: 256	I have 1 s5830 before it was go in dm, but when i make software with odin, its dead now and not go in dm. when i make GTAG from RIFF its gave me following Error:- Connecting to the dead body...OK Detected dead body ID: 0x203C10E1 - CORRECT! Set I/O Voltage reads as 2.60V, TCK Frequency is 12 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...FAILED ERROR: RAM memory selftest failed. Please help me in this mater Thanks.