s5830i boot repair

[camoka]

i have a 5830i mobilephone while i was flashing via odin it has been bricked
and then i try to resurrect phone by riff box but nothing has changed
the phone remains bricked
how could i fix it

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung S5830i V1.0.4476.13359]

Connecting to the dead body...OK
Detected dead body ID: 0x07B3617F - CORRECT!
Set I/O Voltage reads as 3.00V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Selected Resurrection Data for the NAND Chip with Page size = 4KB

Flashing the dead body...OK
WARNING: Programming Error (0x25) at 0x000000000000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000080000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000100000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000001280000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000001300000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000001400000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x00001FF00000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x00001FF80000 is handled as Cut Excess.
Resurrection complete!

[algerienbox]

RIFF JTAG Box FAQ - Error code 0x25

[BABAK NURI]

Hi camoka
This error come from bad sector on Nand memory...
But i see,you have bad luke
Because You have bad sector in boot area