s8600 fullflash erase - GSM-Forum

Kent İletişim · 05-26-2012, 14:23

s8600 added fullflash erase?

**legija** · 05-26-2012, 14:46

Hi,
There is no need for erasing full flash, It's more simple to rewrite EFS, using eMMC plugin.
RIFF JTAG Box FAQ - How to use QUALCOMM eMMC MBR/EBR Partitioning plugin

But, if You really want to erase eMMC chip, You can in fact only null erase it. Basically, it would write 00 00 00 00 ... content to all or selected partitions.

Here is procedure:

- Launch eMMC Plugin
- Click "Load image from device"
At this point, plugin will read partitions (ebr/mbr table) from phone, and create and empty file dump, filled with 00 00 00 00 . . .
- Select partition You want to null erase
- Click "Flash Selected"

This procedure will take time, because it's practically flash procedure. Simple erasing on eMMC chips is DISABLED.

Kent İletişim · 05-26-2012, 16:40

imei not active in this process happening? example for s8600

05-26-2012, 14:23	#1 (permalink)
Kent İletişim Crazy Poster Join Date: May 2006 Posts: 56 Member: 277881 Status: Offline Thanks: 13 Thanked 2 Times in 1 Post	s8600 fullflash erase s8600 added fullflash erase?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
: Eraser 5.5,Dejan Hex,GD35, and more for free!!!	evilspell	GSM Mobile Links	0	02-17-2002 22:43
i need fullflash file 3210 v5.1 A	pan_zp	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	6	09-24-2001 06:00
Who can send me f_loader for 001F00C0 for erasing and writing!!!	starpho	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	12	09-19-2001 19:44
Error erase flash in 3210	Invader	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	5	04-17-2001 23:31
erasing flash error 3210 v6	gaz	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	1	02-11-2001 13:01

05-26-2012, 14:46	#2 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 44 Posts: 4,539 Member: 256342 Status: Offline Sonork: 100.45940 Thanks: 127 Thanked 23,926 Times in 1,941 Posts	Hi, There is no need for erasing full flash, It's more simple to rewrite EFS, using eMMC plugin. RIFF JTAG Box FAQ - How to use QUALCOMM eMMC MBR/EBR Partitioning plugin But, if You really want to erase eMMC chip, You can in fact only null erase it. Basically, it would write 00 00 00 00 ... content to all or selected partitions. Here is procedure: - Launch eMMC Plugin - Click "Load image from device" At this point, plugin will read partitions (ebr/mbr table) from phone, and create and empty file dump, filled with 00 00 00 00 . . . - Select partition You want to null erase - Click "Flash Selected" This procedure will take time, because it's practically flash procedure. Simple erasing on eMMC chips is DISABLED.

05-26-2012, 16:40	#3 (permalink)
Kent İletişim Crazy Poster Join Date: May 2006 Posts: 56 Member: 277881 Status: Offline Thanks: 13 Thanked 2 Times in 1 Post	imei not active in this process happening? example for s8600