sam tab p6800 dead boot erorr - GSM-Forum

zabih · 09-07-2013, 11:03

i flashed tab p6800 but dead eroor please riff team help me
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.51
Selected Resurrector: [Samsung P6800 V1.0.4703.63562]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 2.79V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000048

No Resurrection Data is available for the eMMC Chip with Capacity = 0B
WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 14.68GB

ERROR: Selected FLASH Chip was not initialized by the DCC Loader.

**legija** · 09-07-2013, 11:28

RIFF JTAG Box FAQ - WARNING: DCC Loader was unable to initialize FLASH1 chip.

zabih · 09-07-2013, 15:56

ok sir thanks alot Mr LEGIJA

dj.adam · 12-09-2015, 20:25

plz i need Resurrectors for GT-P6800 32gb , in support area only 16gb Resurrectors............

09-07-2013, 11:03	#1 (permalink)
zabih Freak Poster Join Date: Mar 2008 Location: kabul AFGHANISTAN Age: 35 Posts: 176 Member: 724190 Status: Offline Sonork: zabih Thanks Meter: 16	sam tab p6800 dead boot erorr i flashed tab p6800 but dead eroor please riff team help me Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.51 Selected Resurrector: [Samsung P6800 V1.0.4703.63562] Connecting to the dead body...OK Detected dead body ID: 0x4BA00477 - CORRECT! Set I/O Voltage reads as 2.79V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000048 No Resurrection Data is available for the eMMC Chip with Capacity = 0B WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 14.68GB ERROR: Selected FLASH Chip was not initialized by the DCC Loader.

09-07-2013, 11:28	#2 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	RIFF JTAG Box FAQ - WARNING: DCC Loader was unable to initialize FLASH1 chip.

09-07-2013, 15:56	#3 (permalink)
zabih Freak Poster Join Date: Mar 2008 Location: kabul AFGHANISTAN Age: 35 Posts: 176 Member: 724190 Status: Offline Sonork: zabih Thanks Meter: 16	ok sir thanks alot Mr LEGIJA

12-09-2015, 20:25	#4 (permalink)
dj.adam No Life Poster Join Date: Apr 2006 Location: kalimatan selatan - indonesia Posts: 502 Member: 259306 Status: Offline Thanks Meter: 96	plz i need Resurrectors for GT-P6800 32gb , in support area only 16gb Resurrectors............