|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
|
Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source |
| LinkBack | Thread Tools | Display Modes |
02-19-2011, 13:32 | #1 (permalink) |
Freak Poster Join Date: Dec 2007 Location: Delhi.India
Posts: 290
Member: 652685 Status: Offline Sonork: 100.1594842 Thanks Meter: 45 | Samsung CDMA S269 QSC6010 Blinking I have a cdma samsung set having qsc6010 and pinouts already marked on pcb. Dcc Read operation is done successfully but i can't write the working bin to this phone. i also tried over two other handsets of same model but all giving the below error. %20%20Uploaded%20with%20ImageShack.us[/IMG] PLease help. |
03-16-2011, 06:40 | #5 (permalink) |
Freak Poster Join Date: Dec 2007 Location: Delhi.India
Posts: 290
Member: 652685 Status: Offline Sonork: 100.1594842 Thanks Meter: 45 | Please have the log [3/16/2011 10:02:12 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:02:12 AM] Open serial port...OK [3/16/2011 10:02:12 AM] Connecting to the RIFF Box...OK [3/16/2011 10:02:12 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:02:12 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:02:12 AM] [3/16/2011 10:02:12 AM] Connecting to the dead body...OK [3/16/2011 10:02:12 AM] Detected dead body ID: 0x220B10E1 - WRONG!!! [3/16/2011 10:02:12 AM] ERROR: Current ID does not belong to the ZTE S100 family. [3/16/2011 10:02:12 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:02:17 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:02:18 AM] Open serial port...OK [3/16/2011 10:02:18 AM] Connecting to the RIFF Box...OK [3/16/2011 10:02:18 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:02:18 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:02:18 AM] [3/16/2011 10:02:18 AM] Connecting to the dead body...OK [3/16/2011 10:02:18 AM] Detected dead body ID: 0x220B10E1 - IGNORED! [3/16/2011 10:02:18 AM] Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK [3/16/2011 10:02:18 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:02:18 AM] [3/16/2011 10:02:18 AM] Resurrection sequence started. [3/16/2011 10:02:18 AM] Establish communication with the phone...OK [3/16/2011 10:02:18 AM] Initializing internal hardware configuration...OK [3/16/2011 10:02:18 AM] Uploading resurrector data into memory...FAILED [3/16/2011 10:02:18 AM] ERROR: RAM memory selftest failed. [3/16/2011 10:02:18 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:02:20 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:02:20 AM] Open serial port...OK [3/16/2011 10:02:20 AM] Connecting to the RIFF Box...OK [3/16/2011 10:02:20 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:02:20 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:02:20 AM] [3/16/2011 10:02:20 AM] Connecting to the dead body...OK [3/16/2011 10:02:20 AM] Detected dead body ID: 0x220B10E1 - IGNORED! [3/16/2011 10:02:20 AM] Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK [3/16/2011 10:02:20 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:02:20 AM] [3/16/2011 10:02:20 AM] Resurrection sequence started. [3/16/2011 10:02:20 AM] Establish communication with the phone...OK [3/16/2011 10:02:20 AM] Initializing internal hardware configuration...OK [3/16/2011 10:02:20 AM] Uploading resurrector data into memory...FAILED [3/16/2011 10:02:20 AM] ERROR: RAM memory selftest failed. [3/16/2011 10:02:20 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:02:21 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:02:21 AM] Open serial port...OK [3/16/2011 10:02:21 AM] Connecting to the RIFF Box...OK [3/16/2011 10:02:21 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:02:21 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:02:21 AM] [3/16/2011 10:02:21 AM] Connecting to the dead body...OK [3/16/2011 10:02:21 AM] Detected dead body ID: 0x220B10E1 - IGNORED! [3/16/2011 10:02:21 AM] Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK [3/16/2011 10:02:21 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:02:21 AM] [3/16/2011 10:02:21 AM] Resurrection sequence started. [3/16/2011 10:02:21 AM] Establish communication with the phone...OK [3/16/2011 10:02:21 AM] Initializing internal hardware configuration...OK [3/16/2011 10:02:21 AM] Uploading resurrector data into memory...FAILED [3/16/2011 10:02:21 AM] ERROR: RAM memory selftest failed. [3/16/2011 10:02:21 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:02:21 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:02:22 AM] Open serial port...OK [3/16/2011 10:02:22 AM] Connecting to the RIFF Box...OK [3/16/2011 10:02:22 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:02:22 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:02:22 AM] [3/16/2011 10:02:22 AM] Connecting to the dead body...OK [3/16/2011 10:02:22 AM] Detected dead body ID: 0x220B10E1 - IGNORED! [3/16/2011 10:02:22 AM] Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK [3/16/2011 10:02:22 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:02:22 AM] [3/16/2011 10:02:22 AM] Resurrection sequence started. [3/16/2011 10:02:22 AM] Establish communication with the phone...OK [3/16/2011 10:02:22 AM] Initializing internal hardware configuration...OK [3/16/2011 10:02:22 AM] Uploading resurrector data into memory...FAILED [3/16/2011 10:02:22 AM] ERROR: RAM memory selftest failed. [3/16/2011 10:02:22 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:02:28 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:02:29 AM] Open serial port...OK [3/16/2011 10:02:29 AM] Connecting to the RIFF Box...OK [3/16/2011 10:02:29 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:02:29 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:02:29 AM] [3/16/2011 10:02:29 AM] Connecting to the dead body...OK [3/16/2011 10:02:29 AM] Detected dead body ID: 0x220B10E1 - IGNORED! [3/16/2011 10:02:29 AM] Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK [3/16/2011 10:02:29 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:02:29 AM] [3/16/2011 10:02:29 AM] Resurrection sequence started. [3/16/2011 10:02:29 AM] Establish communication with the phone...OK [3/16/2011 10:02:29 AM] Initializing internal hardware configuration...OK [3/16/2011 10:02:29 AM] Uploading resurrector data into memory...OK [3/16/2011 10:02:29 AM] Starting communication with resurrector...OK [3/16/2011 10:02:29 AM] [3/16/2011 10:02:29 AM] Detected an Initialized FLASH1 Chip ID: 0x0098/0x0096 (8MB) [3/16/2011 10:02:29 AM] [3/16/2011 10:02:29 AM] Invalid length. It should not be zero. [3/16/2011 10:02:29 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:02:30 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:02:31 AM] Open serial port...OK [3/16/2011 10:02:31 AM] Connecting to the RIFF Box...OK [3/16/2011 10:02:31 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:02:31 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:02:31 AM] [3/16/2011 10:02:31 AM] Connecting to the dead body...OK [3/16/2011 10:02:31 AM] Detected dead body ID: 0x220B10E1 - IGNORED! [3/16/2011 10:02:31 AM] Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK [3/16/2011 10:02:31 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:02:31 AM] [3/16/2011 10:02:31 AM] Resurrection sequence started. [3/16/2011 10:02:31 AM] Establish communication with the phone...OK [3/16/2011 10:02:31 AM] Initializing internal hardware configuration...OK [3/16/2011 10:02:31 AM] Uploading resurrector data into memory...OK [3/16/2011 10:02:31 AM] Starting communication with resurrector...OK [3/16/2011 10:02:31 AM] [3/16/2011 10:02:31 AM] Detected an Initialized FLASH1 Chip ID: 0x0098/0x0096 (8MB) [3/16/2011 10:02:31 AM] [3/16/2011 10:02:31 AM] Invalid length. It should not be zero. [3/16/2011 10:02:31 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:02:32 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:02:33 AM] Open serial port...OK [3/16/2011 10:02:33 AM] Connecting to the RIFF Box...OK [3/16/2011 10:02:33 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:02:33 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:02:33 AM] [3/16/2011 10:02:33 AM] Connecting to the dead body...OK [3/16/2011 10:02:33 AM] Detected dead body ID: 0x220B10E1 - IGNORED! [3/16/2011 10:02:33 AM] Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK [3/16/2011 10:02:33 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:02:33 AM] [3/16/2011 10:02:33 AM] Resurrection sequence started. [3/16/2011 10:02:33 AM] Establish communication with the phone...OK [3/16/2011 10:02:33 AM] Initializing internal hardware configuration...OK [3/16/2011 10:02:33 AM] Uploading resurrector data into memory...OK [3/16/2011 10:02:33 AM] Starting communication with resurrector...OK [3/16/2011 10:02:33 AM] [3/16/2011 10:02:33 AM] Detected an Initialized FLASH1 Chip ID: 0x0098/0x0096 (8MB) [3/16/2011 10:02:33 AM] [3/16/2011 10:02:33 AM] Invalid length. It should not be zero. [3/16/2011 10:02:33 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:02:36 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:03:06 AM] Open serial port...OK [3/16/2011 10:03:06 AM] Connecting to the RIFF Box...OK [3/16/2011 10:03:06 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:03:06 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:03:06 AM] [3/16/2011 10:03:06 AM] Connecting to the dead body...OK [3/16/2011 10:03:06 AM] Detected dead body ID: 0x220B10E1 - IGNORED! [3/16/2011 10:03:06 AM] Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK [3/16/2011 10:03:06 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:03:06 AM] [3/16/2011 10:03:06 AM] Resurrection sequence started. [3/16/2011 10:03:06 AM] Establish communication with the phone...OK [3/16/2011 10:03:06 AM] Initializing internal hardware configuration...OK [3/16/2011 10:03:06 AM] Uploading resurrector data into memory...OK [3/16/2011 10:03:06 AM] Starting communication with resurrector...OK [3/16/2011 10:03:06 AM] [3/16/2011 10:03:06 AM] Detected an Initialized FLASH1 Chip ID: 0x0098/0x0096 (8MB) [3/16/2011 10:03:06 AM] [3/16/2011 10:03:06 AM] Reading FLASH1 address space from 0x00000000 to 0x007FFFFF [3/16/2011 10:03:06 AM] Completed in 00:00:29.344 (Average Transfer Rate: 279.17 kB/s) [3/16/2011 10:03:06 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:03:38 AM] ------------------------------- JTAG Manager Session Closed ------------------------------- [3/16/2011 10:51:11 AM] ------------------------------- JTAG Manager Session Opened ------------------------------- [3/16/2011 10:51:11 AM] JTAG Manger Version: 1.28 [3/16/2011 10:51:11 AM] ------------------------------------------------------------------------------------------- [3/16/2011 10:51:41 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:42 AM] Open serial port...OK [3/16/2011 10:51:42 AM] Connecting to the RIFF Box...OK [3/16/2011 10:51:42 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:51:42 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:51:42 AM] [3/16/2011 10:51:42 AM] Connecting to the dead body... [3/16/2011 10:51:42 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.33V [3/16/2011 10:51:42 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:45 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:46 AM] Open serial port...OK [3/16/2011 10:51:46 AM] Connecting to the RIFF Box...OK [3/16/2011 10:51:46 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:51:46 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:51:46 AM] [3/16/2011 10:51:46 AM] Connecting to the dead body... [3/16/2011 10:51:46 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.23V [3/16/2011 10:51:46 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:47 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:47 AM] Open serial port...OK [3/16/2011 10:51:47 AM] Connecting to the RIFF Box...OK [3/16/2011 10:51:47 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:51:47 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:51:47 AM] [3/16/2011 10:51:47 AM] Connecting to the dead body... [3/16/2011 10:51:47 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 4.56V [3/16/2011 10:51:47 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:47 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:48 AM] Open serial port...OK [3/16/2011 10:51:48 AM] Connecting to the RIFF Box...OK [3/16/2011 10:51:48 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:51:48 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:51:48 AM] [3/16/2011 10:51:48 AM] Connecting to the dead body... [3/16/2011 10:51:48 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 4.62V [3/16/2011 10:51:48 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:48 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:48 AM] Open serial port...OK [3/16/2011 10:51:48 AM] Connecting to the RIFF Box...OK [3/16/2011 10:51:48 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:51:48 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:51:48 AM] [3/16/2011 10:51:48 AM] Connecting to the dead body... [3/16/2011 10:51:48 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 4.26V [3/16/2011 10:51:48 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:49 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:49 AM] Open serial port...OK [3/16/2011 10:51:49 AM] Connecting to the RIFF Box...OK [3/16/2011 10:51:49 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:51:49 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:51:49 AM] [3/16/2011 10:51:49 AM] Connecting to the dead body... [3/16/2011 10:51:49 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 4.45V [3/16/2011 10:51:49 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:50 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:50 AM] Open serial port...OK [3/16/2011 10:51:50 AM] Connecting to the RIFF Box...OK [3/16/2011 10:51:50 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:51:50 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:51:50 AM] [3/16/2011 10:51:50 AM] Connecting to the dead body... [3/16/2011 10:51:50 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 4.43V [3/16/2011 10:51:50 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:50 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:50 AM] Open serial port...OK [3/16/2011 10:51:50 AM] Connecting to the RIFF Box...OK [3/16/2011 10:51:50 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:51:50 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:51:50 AM] [3/16/2011 10:51:50 AM] Connecting to the dead body... [3/16/2011 10:51:50 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 4.46V [3/16/2011 10:51:50 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:51 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:51 AM] Open serial port...OK [3/16/2011 10:51:51 AM] Connecting to the RIFF Box...OK [3/16/2011 10:51:51 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:51:51 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:51:51 AM] [3/16/2011 10:51:51 AM] Connecting to the dead body... [3/16/2011 10:51:51 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 4.43V [3/16/2011 10:51:51 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:55 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:55 AM] Open serial port...OK [3/16/2011 10:51:55 AM] Connecting to the RIFF Box...OK [3/16/2011 10:51:55 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:51:55 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:51:55 AM] [3/16/2011 10:51:55 AM] Connecting to the dead body... [3/16/2011 10:51:55 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 4.52V [3/16/2011 10:51:55 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:56 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:56 AM] Open serial port...OK [3/16/2011 10:51:56 AM] Connecting to the RIFF Box...OK [3/16/2011 10:51:56 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:51:56 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:51:56 AM] [3/16/2011 10:51:56 AM] Connecting to the dead body... [3/16/2011 10:51:56 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 4.26V [3/16/2011 10:51:56 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:57 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:57 AM] Open serial port...OK [3/16/2011 10:51:57 AM] Connecting to the RIFF Box...OK [3/16/2011 10:51:57 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:51:57 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:51:57 AM] [3/16/2011 10:51:57 AM] Connecting to the dead body... [3/16/2011 10:51:57 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 4.48V [3/16/2011 10:51:57 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:52:11 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:52:12 AM] Open serial port...OK [3/16/2011 10:52:12 AM] Connecting to the RIFF Box...OK [3/16/2011 10:52:12 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:52:12 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:52:12 AM] [3/16/2011 10:52:12 AM] Connecting to the dead body... [3/16/2011 10:52:12 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.23V [3/16/2011 10:52:12 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:52:13 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:52:13 AM] Open serial port...OK [3/16/2011 10:52:13 AM] Connecting to the RIFF Box...OK [3/16/2011 10:52:13 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:52:13 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:52:13 AM] [3/16/2011 10:52:13 AM] Connecting to the dead body... [3/16/2011 10:52:13 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.21V [3/16/2011 10:52:13 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:52:30 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:52:31 AM] Open serial port...OK [3/16/2011 10:52:31 AM] Connecting to the RIFF Box...OK [3/16/2011 10:52:31 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:52:31 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:52:31 AM] [3/16/2011 10:52:31 AM] Connecting to the dead body... [3/16/2011 10:52:31 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.25V [3/16/2011 10:52:31 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:52:31 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:52:32 AM] Open serial port...OK [3/16/2011 10:52:32 AM] Connecting to the RIFF Box...OK [3/16/2011 10:52:32 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:52:32 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:52:32 AM] [3/16/2011 10:52:32 AM] Connecting to the dead body... [3/16/2011 10:52:32 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.28V [3/16/2011 10:52:32 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:52:40 AM] [START OPERATION_ID = RESTART_TARGET] [3/16/2011 10:52:41 AM] Open serial port...OK [3/16/2011 10:52:41 AM] Connecting to the RIFF Box...OK [3/16/2011 10:52:41 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:52:41 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:52:41 AM] [3/16/2011 10:52:41 AM] Restarting target (nRST Low then High)...OK [3/16/2011 10:52:41 AM] [FINISH OPERATION_ID = RESTART_TARGET] [3/16/2011 10:52:44 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:52:45 AM] Open serial port...OK [3/16/2011 10:52:45 AM] Connecting to the RIFF Box...OK [3/16/2011 10:52:45 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:52:45 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:52:45 AM] [3/16/2011 10:52:45 AM] Connecting to the dead body...ERROR [3/16/2011 10:52:45 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.24V [3/16/2011 10:52:45 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:52:46 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:52:47 AM] Open serial port...OK [3/16/2011 10:52:47 AM] Connecting to the RIFF Box...OK [3/16/2011 10:52:47 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:52:47 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:52:47 AM] [3/16/2011 10:52:47 AM] Connecting to the dead body...ERROR [3/16/2011 10:52:47 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.24V [3/16/2011 10:52:47 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:52:47 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:52:48 AM] Open serial port...OK [3/16/2011 10:52:48 AM] Connecting to the RIFF Box...OK [3/16/2011 10:52:48 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:52:48 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:52:48 AM] [3/16/2011 10:52:48 AM] Connecting to the dead body...ERROR [3/16/2011 10:52:48 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.27V [3/16/2011 10:52:48 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:52:48 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:52:49 AM] Open serial port...OK [3/16/2011 10:52:49 AM] Connecting to the RIFF Box...OK [3/16/2011 10:52:49 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:52:49 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:52:49 AM] [3/16/2011 10:52:49 AM] Connecting to the dead body...ERROR [3/16/2011 10:52:49 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.24V [3/16/2011 10:52:49 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:53:43 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:53:44 AM] Open serial port...OK [3/16/2011 10:53:44 AM] Connecting to the RIFF Box...OK [3/16/2011 10:53:44 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:53:44 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:53:44 AM] [3/16/2011 10:53:44 AM] Connecting to the dead body...ERROR [3/16/2011 10:53:44 AM] Set I/O Voltage reads as 2.58V, TCK Frequency is RTCK [3/16/2011 10:53:44 AM] Model selected: HAIER - Haier C2076 [3/16/2011 10:53:44 AM] [3/16/2011 10:53:44 AM] None is detected. [3/16/2011 10:53:44 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:53:45 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:53:45 AM] Open serial port...OK [3/16/2011 10:53:45 AM] Connecting to the RIFF Box...OK [3/16/2011 10:53:45 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:53:45 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:53:45 AM] [3/16/2011 10:53:45 AM] Connecting to the dead body...ERROR [3/16/2011 10:53:45 AM] Set I/O Voltage reads as 2.58V, TCK Frequency is RTCK [3/16/2011 10:53:45 AM] Model selected: HAIER - Haier C2076 [3/16/2011 10:53:45 AM] [3/16/2011 10:53:45 AM] None is detected. [3/16/2011 10:53:45 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:53:49 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:00 AM] Open serial port...OK [3/16/2011 10:54:00 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:00 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:00 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:54:00 AM] [3/16/2011 10:54:00 AM] Connecting to the dead body...OK [3/16/2011 10:54:00 AM] Detected dead body ID: 0x200BB0E1 - IGNORED! [3/16/2011 10:54:00 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.25V [3/16/2011 10:54:00 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:03 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:03 AM] Open serial port...OK [3/16/2011 10:54:03 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:03 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:03 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:54:03 AM] [3/16/2011 10:54:03 AM] Connecting to the dead body... [3/16/2011 10:54:03 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.25V [3/16/2011 10:54:03 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:04 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:04 AM] Open serial port...OK [3/16/2011 10:54:04 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:04 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:04 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:54:04 AM] [3/16/2011 10:54:04 AM] Connecting to the dead body... [3/16/2011 10:54:04 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.21V [3/16/2011 10:54:04 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:05 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:05 AM] Open serial port...OK [3/16/2011 10:54:05 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:05 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:05 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:54:05 AM] [3/16/2011 10:54:05 AM] Connecting to the dead body... [3/16/2011 10:54:05 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.26V [3/16/2011 10:54:05 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:14 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:14 AM] Open serial port...OK [3/16/2011 10:54:14 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:14 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:14 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:54:14 AM] [3/16/2011 10:54:14 AM] Connecting to the dead body... [3/16/2011 10:54:14 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 4.45V [3/16/2011 10:54:14 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:15 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:15 AM] Open serial port...OK [3/16/2011 10:54:15 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:15 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:15 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:54:15 AM] [3/16/2011 10:54:15 AM] Connecting to the dead body... [3/16/2011 10:54:15 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 4.46V [3/16/2011 10:54:15 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:21 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:21 AM] Open serial port...OK [3/16/2011 10:54:21 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:21 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:21 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:54:21 AM] [3/16/2011 10:54:21 AM] Connecting to the dead body... [3/16/2011 10:54:21 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 4.34V [3/16/2011 10:54:21 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:22 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:22 AM] Open serial port...OK [3/16/2011 10:54:22 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:22 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:22 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:54:22 AM] [3/16/2011 10:54:22 AM] Connecting to the dead body... [3/16/2011 10:54:22 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 4.49V [3/16/2011 10:54:22 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:30 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:30 AM] Open serial port...OK [3/16/2011 10:54:30 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:30 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:30 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:54:30 AM] [3/16/2011 10:54:30 AM] Connecting to the dead body... [3/16/2011 10:54:30 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 4.49V [3/16/2011 10:54:30 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:31 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:31 AM] Open serial port...OK [3/16/2011 10:54:31 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:31 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:31 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:54:31 AM] [3/16/2011 10:54:31 AM] Connecting to the dead body... [3/16/2011 10:54:31 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 4.46V [3/16/2011 10:54:31 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:34 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:35 AM] Open serial port...OK [3/16/2011 10:54:35 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:35 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:35 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:54:35 AM] [3/16/2011 10:54:35 AM] Connecting to the dead body... [3/16/2011 10:54:35 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.14V [3/16/2011 10:54:35 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:36 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:36 AM] Open serial port...OK [3/16/2011 10:54:36 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:36 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:36 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:54:36 AM] [3/16/2011 10:54:36 AM] Connecting to the dead body... [3/16/2011 10:54:36 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.10V [3/16/2011 10:54:36 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:37 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:37 AM] Open serial port...OK [3/16/2011 10:54:37 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:37 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:37 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:54:37 AM] [3/16/2011 10:54:37 AM] Connecting to the dead body... [3/16/2011 10:54:37 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.10V [3/16/2011 10:54:37 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:38 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:38 AM] Open serial port...OK [3/16/2011 10:54:38 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:38 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:38 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:54:38 AM] [3/16/2011 10:54:38 AM] Connecting to the dead body... [3/16/2011 10:54:38 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.06V [3/16/2011 10:54:38 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:50 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:51 AM] Open serial port...OK [3/16/2011 10:54:51 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:51 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:51 AM] Selected Custom Target: [ARM926, 3.30V, TAP0] [3/16/2011 10:54:51 AM] [3/16/2011 10:54:51 AM] Connecting to the ARM926 target...ERROR [3/16/2011 10:54:51 AM] ERROR: Set I/O Voltage to 3.30V failed. Real reading is 5.86V [3/16/2011 10:54:51 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:52 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:52 AM] Open serial port...OK [3/16/2011 10:54:52 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:52 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:52 AM] Selected Custom Target: [ARM926, 3.30V, TAP0] [3/16/2011 10:54:52 AM] [3/16/2011 10:54:52 AM] Connecting to the ARM926 target...ERROR [3/16/2011 10:54:52 AM] ERROR: Set I/O Voltage to 3.30V failed. Real reading is 5.86V [3/16/2011 10:54:52 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:53 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:54 AM] Open serial port...OK [3/16/2011 10:54:54 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:54 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:54 AM] Selected Custom Target: [ARM926, 3.30V, TAP0] [3/16/2011 10:54:54 AM] [3/16/2011 10:54:54 AM] Connecting to the ARM926 target...ERROR [3/16/2011 10:54:54 AM] ERROR: Set I/O Voltage to 3.30V failed. Real reading is 5.90V [3/16/2011 10:54:54 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:56 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:57 AM] Open serial port...OK [3/16/2011 10:54:57 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:57 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:57 AM] Selected Custom Target: [ARM926, 1.75V, TAP0] [3/16/2011 10:54:57 AM] [3/16/2011 10:54:57 AM] Connecting to the ARM926 target...ERROR [3/16/2011 10:54:57 AM] ERROR: Set I/O Voltage to 1.75V failed. Real reading is 4.70V [3/16/2011 10:54:57 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:57 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:58 AM] Open serial port...OK [3/16/2011 10:54:58 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:58 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:58 AM] Selected Custom Target: [ARM926, 1.75V, TAP0] [3/16/2011 10:54:58 AM] [3/16/2011 10:54:58 AM] Connecting to the ARM926 target...ERROR [3/16/2011 10:54:58 AM] ERROR: Set I/O Voltage to 1.75V failed. Real reading is 4.68V [3/16/2011 10:54:58 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:55:37 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:55:38 AM] Open serial port...OK [3/16/2011 10:55:38 AM] Connecting to the RIFF Box...OK [3/16/2011 10:55:38 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:55:38 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:55:38 AM] [3/16/2011 10:55:38 AM] Connecting to the dead body...OK [3/16/2011 10:55:38 AM] Detected dead body ID: 0x200B10E1 - IGNORED! [3/16/2011 10:55:38 AM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK [3/16/2011 10:55:38 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:55:38 AM] [3/16/2011 10:55:38 AM] Resurrection sequence started. [3/16/2011 10:55:38 AM] Establish communication with the phone...OK [3/16/2011 10:55:38 AM] Initializing internal hardware configuration...OK [3/16/2011 10:55:38 AM] Uploading resurrector data into memory...FAILED [3/16/2011 10:55:38 AM] ERROR: RAM memory selftest failed. [3/16/2011 10:55:38 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:55:41 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:55:41 AM] Open serial port...OK [3/16/2011 10:55:41 AM] Connecting to the RIFF Box...OK [3/16/2011 10:55:41 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:55:41 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:55:41 AM] [3/16/2011 10:55:41 AM] Connecting to the dead body...OK [3/16/2011 10:55:41 AM] Detected dead body ID: 0x200B10E1 - IGNORED! [3/16/2011 10:55:41 AM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK [3/16/2011 10:55:41 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:55:41 AM] [3/16/2011 10:55:41 AM] Resurrection sequence started. [3/16/2011 10:55:41 AM] Establish communication with the phone...OK [3/16/2011 10:55:41 AM] Initializing internal hardware configuration...OK [3/16/2011 10:55:41 AM] Uploading resurrector data into memory...FAILED [3/16/2011 10:55:41 AM] ERROR: RAM memory selftest failed. [3/16/2011 10:55:41 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:55:42 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:55:42 AM] Open serial port...OK [3/16/2011 10:55:42 AM] Connecting to the RIFF Box...OK [3/16/2011 10:55:42 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:55:42 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:55:42 AM] [3/16/2011 10:55:42 AM] Connecting to the dead body...OK [3/16/2011 10:55:42 AM] Detected dead body ID: 0x200B10E1 - IGNORED! [3/16/2011 10:55:42 AM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK [3/16/2011 10:55:42 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:55:42 AM] [3/16/2011 10:55:42 AM] Resurrection sequence started. [3/16/2011 10:55:42 AM] Establish communication with the phone...OK [3/16/2011 10:55:42 AM] Initializing internal hardware configuration...OK [3/16/2011 10:55:42 AM] Uploading resurrector data into memory...FAILED [3/16/2011 10:55:42 AM] ERROR: RAM memory selftest failed. [3/16/2011 10:55:42 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:55:43 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:55:43 AM] Open serial port...OK [3/16/2011 10:55:43 AM] Connecting to the RIFF Box...OK [3/16/2011 10:55:43 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:55:43 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:55:43 AM] [3/16/2011 10:55:43 AM] Connecting to the dead body...OK [3/16/2011 10:55:43 AM] Detected dead body ID: 0x200B10E1 - IGNORED! [3/16/2011 10:55:43 AM] Set I/O Voltage reads as 2.58V, TCK Frequency is RTCK [3/16/2011 10:55:43 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:55:43 AM] [3/16/2011 10:55:43 AM] Resurrection sequence started. [3/16/2011 10:55:43 AM] Establish communication with the phone...OK [3/16/2011 10:55:43 AM] Initializing internal hardware configuration...OK [3/16/2011 10:55:43 AM] Uploading resurrector data into memory...FAILED [3/16/2011 10:55:43 AM] ERROR: RAM memory selftest failed. [3/16/2011 10:55:43 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:55:55 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:55:56 AM] Open serial port...OK [3/16/2011 10:55:56 AM] Connecting to the RIFF Box...OK [3/16/2011 10:55:56 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:55:56 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:55:56 AM] [3/16/2011 10:55:56 AM] Connecting to the dead body...OK [3/16/2011 10:55:56 AM] Detected dead body ID: 0x200B10E1 - IGNORED! [3/16/2011 10:55:56 AM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK [3/16/2011 10:55:56 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:55:56 AM] [3/16/2011 10:55:56 AM] Resurrection sequence started. [3/16/2011 10:55:56 AM] Establish communication with the phone...OK [3/16/2011 10:55:56 AM] Initializing internal hardware configuration...OK [3/16/2011 10:55:56 AM] Uploading resurrector data into memory...FAILED [3/16/2011 10:55:56 AM] ERROR: RAM memory selftest failed. [3/16/2011 10:55:56 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:55:56 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:55:57 AM] Open serial port...OK [3/16/2011 10:55:57 AM] Connecting to the RIFF Box...OK [3/16/2011 10:55:57 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:55:57 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:55:57 AM] [3/16/2011 10:55:57 AM] Connecting to the dead body...OK [3/16/2011 10:55:57 AM] Detected dead body ID: 0x200B10E1 - IGNORED! [3/16/2011 10:55:57 AM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK [3/16/2011 10:55:57 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:55:57 AM] [3/16/2011 10:55:57 AM] Resurrection sequence started. [3/16/2011 10:55:57 AM] Establish communication with the phone...OK [3/16/2011 10:55:57 AM] Initializing internal hardware configuration...OK [3/16/2011 10:55:57 AM] Uploading resurrector data into memory...FAILED [3/16/2011 10:55:57 AM] ERROR: RAM memory selftest failed. [3/16/2011 10:55:57 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:55:57 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:55:58 AM] Open serial port...OK [3/16/2011 10:55:58 AM] Connecting to the RIFF Box...OK [3/16/2011 10:55:58 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:55:58 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:55:58 AM] [3/16/2011 10:55:58 AM] Connecting to the dead body...OK [3/16/2011 10:55:58 AM] Detected dead body ID: 0x200B10E1 - IGNORED! [3/16/2011 10:55:58 AM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK [3/16/2011 10:55:58 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:55:58 AM] [3/16/2011 10:55:58 AM] Resurrection sequence started. [3/16/2011 10:55:58 AM] Establish communication with the phone...OK [3/16/2011 10:55:58 AM] Initializing internal hardware configuration...OK [3/16/2011 10:55:58 AM] Uploading resurrector data into memory...FAILED [3/16/2011 10:55:58 AM] ERROR: RAM memory selftest failed. [3/16/2011 10:55:58 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:56:04 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:56:08 AM] Open serial port...OK [3/16/2011 10:56:08 AM] Connecting to the RIFF Box...OK [3/16/2011 10:56:08 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:56:08 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:56:08 AM] [3/16/2011 10:56:08 AM] Connecting to the dead body...OK [3/16/2011 10:56:08 AM] Detected dead body ID: 0x200B10E1 - IGNORED! [3/16/2011 10:56:08 AM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK [3/16/2011 10:56:08 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:56:08 AM] [3/16/2011 10:56:08 AM] Resurrection sequence started. [3/16/2011 10:56:08 AM] Establish communication with the phone...OK [3/16/2011 10:56:08 AM] Initializing internal hardware configuration...OK [3/16/2011 10:56:08 AM] Uploading resurrector data into memory...OK [3/16/2011 10:56:08 AM] Starting communication with resurrector...OK [3/16/2011 10:56:08 AM] [3/16/2011 10:56:08 AM] Detected an Initialized FLASH1 Chip ID: 0x00EC/0x2252 (8MB) [3/16/2011 10:56:08 AM] [3/16/2011 10:56:08 AM] Reading FLASH1 address space from 0x00000000 to 0x007FFFFF [3/16/2011 10:56:08 AM] Failed to receive answer to READ command. [3/16/2011 10:56:08 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:56:14 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:56:14 AM] Open serial port...OK [3/16/2011 10:56:14 AM] Connecting to the RIFF Box...ERROR [3/16/2011 10:56:14 AM] ERROR: Wrong response from the RIFF Box. [3/16/2011 10:56:14 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:56:24 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:56:55 AM] Open serial port...OK [3/16/2011 10:56:55 AM] Connecting to the RIFF Box...OK [3/16/2011 10:56:55 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:56:55 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:56:55 AM] [3/16/2011 10:56:55 AM] Connecting to the dead body...OK [3/16/2011 10:56:55 AM] Detected dead body ID: 0x200B10E1 - IGNORED! [3/16/2011 10:56:55 AM] Set I/O Voltage reads as 2.58V, TCK Frequency is RTCK [3/16/2011 10:56:55 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:56:55 AM] [3/16/2011 10:56:55 AM] Resurrection sequence started. [3/16/2011 10:56:55 AM] Establish communication with the phone...OK [3/16/2011 10:56:55 AM] Initializing internal hardware configuration...OK [3/16/2011 10:56:55 AM] Uploading resurrector data into memory...OK [3/16/2011 10:56:55 AM] Starting communication with resurrector...OK [3/16/2011 10:56:55 AM] [3/16/2011 10:56:55 AM] Detected an Initialized FLASH1 Chip ID: 0x00EC/0x2252 (8MB) [3/16/2011 10:56:55 AM] [3/16/2011 10:56:55 AM] Writting FLASH1 memory from 0x00000000 to 0x007FFFFF [3/16/2011 10:56:55 AM] ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK [3/16/2011 10:56:55 AM] ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK [3/16/2011 10:56:55 AM] ERROR: Timeout while waiting for DCC Loader response. Trying to recover... [3/16/2011 10:56:55 AM] ERROR: Forced to Terminate. Terminated at 0x00000000 [3/16/2011 10:56:55 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:56:58 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:56:58 AM] Open serial port...OK [3/16/2011 10:56:58 AM] Connecting to the RIFF Box...OK [3/16/2011 10:56:58 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:56:58 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:56:58 AM] [3/16/2011 10:56:58 AM] Connecting to the dead body... [3/16/2011 10:56:58 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.09V [3/16/2011 10:56:58 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:56:59 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:56:59 AM] Open serial port...OK [3/16/2011 10:56:59 AM] Connecting to the RIFF Box...OK [3/16/2011 10:56:59 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:56:59 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:56:59 AM] [3/16/2011 10:56:59 AM] Connecting to the dead body... [3/16/2011 10:56:59 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.11V [3/16/2011 10:56:59 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:57:00 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:57:23 AM] Open serial port...OK [3/16/2011 10:57:23 AM] Connecting to the RIFF Box...OK [3/16/2011 10:57:23 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:57:23 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:57:23 AM] [3/16/2011 10:57:23 AM] Connecting to the dead body...OK [3/16/2011 10:57:23 AM] Detected dead body ID: 0x200B10E1 - IGNORED! [3/16/2011 10:57:23 AM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK [3/16/2011 10:57:23 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:57:23 AM] [3/16/2011 10:57:23 AM] Resurrection sequence started. [3/16/2011 10:57:23 AM] Establish communication with the phone...OK [3/16/2011 10:57:23 AM] Initializing internal hardware configuration...OK [3/16/2011 10:57:23 AM] Uploading resurrector data into memory...OK [3/16/2011 10:57:23 AM] Starting communication with resurrector...OK [3/16/2011 10:57:23 AM] [3/16/2011 10:57:23 AM] Detected an Initialized FLASH1 Chip ID: 0x00EC/0x2252 (8MB) [3/16/2011 10:57:23 AM] [3/16/2011 10:57:23 AM] Writting FLASH1 memory from 0x00000000 to 0x007FFFFF [3/16/2011 10:57:23 AM] ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK [3/16/2011 10:57:23 AM] ERROR: Timeout while waiting for DCC Loader response. Trying to recover... [3/16/2011 10:57:23 AM] ERROR: Forced to Terminate. Terminated at 0x00000000 [3/16/2011 10:57:23 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:57:27 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:58:07 AM] Open serial port...OK [3/16/2011 10:58:07 AM] Connecting to the RIFF Box...OK [3/16/2011 10:58:07 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:58:07 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:58:07 AM] [3/16/2011 10:58:07 AM] Connecting to the dead body...OK [3/16/2011 10:58:07 AM] Detected dead body ID: 0x200B10E1 - IGNORED! [3/16/2011 10:58:07 AM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK [3/16/2011 10:58:07 AM] Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] [3/16/2011 10:58:07 AM] [3/16/2011 10:58:07 AM] Resurrection sequence started. [3/16/2011 10:58:07 AM] Establish communication with the phone...OK [3/16/2011 10:58:07 AM] Initializing internal hardware configuration...OK [3/16/2011 10:58:07 AM] Uploading resurrector data into memory...OK [3/16/2011 10:58:07 AM] Starting communication with resurrector...OK [3/16/2011 10:58:07 AM] [3/16/2011 10:58:07 AM] Detected an Initialized FLASH1 Chip ID: 0x00EC/0x2252 (8MB) [3/16/2011 10:58:07 AM] [3/16/2011 10:58:07 AM] Writting FLASH1 memory from 0x00000000 to 0x007FFFFF [3/16/2011 10:58:07 AM] ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK [3/16/2011 10:58:07 AM] ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK [3/16/2011 10:58:07 AM] ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK [3/16/2011 10:58:07 AM] ERROR: Stopped due to multiple communication errors. Terminating at 0x00000000 [3/16/2011 10:58:07 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:58:12 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:58:17 AM] Open serial port...OK [3/16/2011 10:58:17 AM] Connecting to the RIFF Box...OK [3/16/2011 10:58:17 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:58:17 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:58:17 AM] [3/16/2011 10:58:17 AM] Connecting to the dead body...OK [3/16/2011 10:58:17 AM] Detected dead body ID: 0x200B10E1 - IGNORED! [3/16/2011 10:58:17 AM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK [3/16/2011 10:58:17 AM] Adaptive Clocking RTCK Sampling is: [Sample at 2 MHz] [3/16/2011 10:58:17 AM] [3/16/2011 10:58:17 AM] Resurrection sequence started. [3/16/2011 10:58:17 AM] Establish communication with the phone...OK [3/16/2011 10:58:17 AM] Initializing internal hardware configuration...OK [3/16/2011 10:58:17 AM] Uploading resurrector data into memory...OK [3/16/2011 10:58:17 AM] Starting communication with resurrector...OK [3/16/2011 10:58:17 AM] [3/16/2011 10:58:17 AM] Detected an Initialized FLASH1 Chip ID: 0x00EC/0x2252 (8MB) [3/16/2011 10:58:17 AM] [3/16/2011 10:58:17 AM] Writting FLASH1 memory from 0x00000000 to 0x007FFFFF [3/16/2011 10:58:17 AM] ERROR: Timeout while waiting for DCC Loader response. Trying to recover... [3/16/2011 10:58:17 AM] ERROR: Forced to Terminate. Terminated at 0x00000000 [3/16/2011 10:58:17 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:58:20 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:58:20 AM] Open serial port...OK [3/16/2011 10:58:20 AM] Connecting to the RIFF Box...ERROR [3/16/2011 10:58:20 AM] ERROR: No response from the RIFF Box. [3/16/2011 10:58:20 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:58:21 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:58:21 AM] Open serial port...OK [3/16/2011 10:58:21 AM] Connecting to the RIFF Box...ERROR [3/16/2011 10:58:21 AM] ERROR: Wrong response from the RIFF Box. [3/16/2011 10:58:21 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:58:22 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:58:22 AM] Open serial port...OK [3/16/2011 10:58:22 AM] Connecting to the RIFF Box...OK [3/16/2011 10:58:22 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:58:22 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:58:22 AM] [3/16/2011 10:58:22 AM] Connecting to the dead body...OK [3/16/2011 10:58:22 AM] Detected dead body ID: 0x200B10E1 - IGNORED! [3/16/2011 10:58:22 AM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK [3/16/2011 10:58:22 AM] Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz] [3/16/2011 10:58:22 AM] [3/16/2011 10:58:22 AM] Resurrection sequence started. [3/16/2011 10:58:22 AM] Establish communication with the phone...OK [3/16/2011 10:58:22 AM] Initializing internal hardware configuration...OK [3/16/2011 10:58:22 AM] Uploading resurrector data into memory...OK [3/16/2011 10:58:22 AM] Starting communication with resurrector...FAILED [3/16/2011 10:58:22 AM] ERROR: No response from the RIFF Box. [3/16/2011 10:58:22 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:58:23 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:58:30 AM] Open serial port...OK [3/16/2011 10:58:30 AM] Connecting to the RIFF Box...OK [3/16/2011 10:58:30 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:58:30 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:58:30 AM] [3/16/2011 10:58:30 AM] Connecting to the dead body...OK [3/16/2011 10:58:30 AM] Detected dead body ID: 0x200B10E1 - IGNORED! [3/16/2011 10:58:30 AM] Set I/O Voltage reads as 2.58V, TCK Frequency is RTCK [3/16/2011 10:58:30 AM] Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz] [3/16/2011 10:58:30 AM] [3/16/2011 10:58:30 AM] Resurrection sequence started. [3/16/2011 10:58:30 AM] Establish communication with the phone...OK [3/16/2011 10:58:30 AM] Initializing internal hardware configuration...OK [3/16/2011 10:58:30 AM] Uploading resurrector data into memory...OK [3/16/2011 10:58:30 AM] Starting communication with resurrector...OK [3/16/2011 10:58:30 AM] [3/16/2011 10:58:30 AM] Detected an Initialized FLASH1 Chip ID: 0x00EC/0x2252 (8MB) [3/16/2011 10:58:30 AM] [3/16/2011 10:58:30 AM] Writting FLASH1 memory from 0x00000000 to 0x007FFFFF [3/16/2011 10:58:30 AM] ERROR: Timeout while waiting for DCC Loader response. Trying to recover... [3/16/2011 10:58:30 AM] ERROR: Forced to Terminate. Terminated at 0x00000000 [3/16/2011 10:58:30 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:58:41 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:58:48 AM] Open serial port...OK [3/16/2011 10:58:48 AM] Connecting to the RIFF Box...OK [3/16/2011 10:58:48 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:58:48 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:58:48 AM] [3/16/2011 10:58:48 AM] Connecting to the dead body...OK [3/16/2011 10:58:48 AM] Detected dead body ID: 0x200B10E1 - IGNORED! [3/16/2011 10:58:48 AM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK [3/16/2011 10:58:48 AM] Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz] [3/16/2011 10:58:48 AM] [3/16/2011 10:58:48 AM] Resurrection sequence started. [3/16/2011 10:58:48 AM] Establish communication with the phone...OK [3/16/2011 10:58:48 AM] Initializing internal hardware configuration...OK [3/16/2011 10:58:48 AM] Uploading resurrector data into memory...OK [3/16/2011 10:58:48 AM] Starting communication with resurrector...OK [3/16/2011 10:58:48 AM] [3/16/2011 10:58:48 AM] Detected an Initialized FLASH1 Chip ID: 0x00EC/0x2252 (8MB) [3/16/2011 10:58:48 AM] [3/16/2011 10:58:48 AM] Writting FLASH1 memory from 0x00000000 to 0x007FFFFF [3/16/2011 10:58:48 AM] ERROR: Timeout while waiting for DCC Loader response. Trying to recover... [3/16/2011 10:58:48 AM] ERROR: Forced to Terminate. Terminated at 0x00000000 [3/16/2011 10:58:48 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:59:01 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:59:02 AM] Open serial port...OK [3/16/2011 10:59:02 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:02 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:02 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:02 AM] [3/16/2011 10:59:02 AM] Connecting to the dead body...OK [3/16/2011 10:59:02 AM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK [3/16/2011 10:59:02 AM] Model selected: ZTE - ZTE S100 [3/16/2011 10:59:02 AM] [3/16/2011 10:59:02 AM] Detected dead body ID: 0x200B10E1 [3/16/2011 10:59:02 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:59:02 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:59:03 AM] Open serial port...OK [3/16/2011 10:59:03 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:03 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:03 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:03 AM] [3/16/2011 10:59:03 AM] Connecting to the dead body...OK [3/16/2011 10:59:03 AM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK [3/16/2011 10:59:03 AM] Model selected: ZTE - ZTE S100 [3/16/2011 10:59:03 AM] [3/16/2011 10:59:03 AM] Detected dead body ID: 0x200B10E1 [3/16/2011 10:59:03 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:59:05 AM] [START OPERATION_ID = EXECUTE_TARGET] [3/16/2011 10:59:05 AM] Open serial port...OK [3/16/2011 10:59:05 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:05 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:05 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:05 AM] [3/16/2011 10:59:05 AM] Target GO from PC = 0x00100000...FAILED [3/16/2011 10:59:05 AM] ERROR: Failed setting Core into Running state. Terminating. [3/16/2011 10:59:05 AM] [FINISH OPERATION_ID = EXECUTE_TARGET] [3/16/2011 10:59:05 AM] [START OPERATION_ID = EXECUTE_TARGET] [3/16/2011 10:59:06 AM] Open serial port...OK [3/16/2011 10:59:06 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:06 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:06 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:06 AM] [3/16/2011 10:59:06 AM] Target GO from PC = 0x00100000...FAILED [3/16/2011 10:59:06 AM] ERROR: Failed setting Core into Running state. Terminating. [3/16/2011 10:59:06 AM] [FINISH OPERATION_ID = EXECUTE_TARGET] [3/16/2011 10:59:13 AM] [START OPERATION_ID = DIRECT_WRITE_MEMORY] [3/16/2011 10:59:13 AM] Open serial port...OK [3/16/2011 10:59:13 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:13 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:13 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:13 AM] [3/16/2011 10:59:13 AM] Writting Target Memory...ERROR [3/16/2011 10:59:13 AM] ERROR: Wrong response from the RIFF Box. [3/16/2011 10:59:13 AM] [FINISH OPERATION_ID = DIRECT_WRITE_MEMORY] [3/16/2011 10:59:15 AM] [START OPERATION_ID = DIRECT_WRITE_MEMORY] [3/16/2011 10:59:15 AM] Open serial port...OK [3/16/2011 10:59:15 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:15 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:15 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:15 AM] [3/16/2011 10:59:15 AM] Writting Target Memory...ERROR [3/16/2011 10:59:15 AM] ERROR: Wrong response from the RIFF Box. [3/16/2011 10:59:15 AM] [FINISH OPERATION_ID = DIRECT_WRITE_MEMORY] [3/16/2011 10:59:16 AM] [START OPERATION_ID = DIRECT_WRITE_MEMORY] [3/16/2011 10:59:16 AM] Open serial port...OK [3/16/2011 10:59:16 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:16 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:16 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:16 AM] [3/16/2011 10:59:16 AM] Writting Target Memory...ERROR [3/16/2011 10:59:16 AM] ERROR: Wrong response from the RIFF Box. [3/16/2011 10:59:16 AM] [FINISH OPERATION_ID = DIRECT_WRITE_MEMORY] [3/16/2011 10:59:16 AM] [START OPERATION_ID = DIRECT_WRITE_MEMORY] [3/16/2011 10:59:17 AM] Open serial port...OK [3/16/2011 10:59:17 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:17 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:17 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:17 AM] [3/16/2011 10:59:17 AM] Writting Target Memory...ERROR [3/16/2011 10:59:17 AM] ERROR: Wrong response from the RIFF Box. [3/16/2011 10:59:17 AM] [FINISH OPERATION_ID = DIRECT_WRITE_MEMORY] [3/16/2011 10:59:17 AM] [START OPERATION_ID = DIRECT_WRITE_MEMORY] [3/16/2011 10:59:17 AM] Open serial port...OK [3/16/2011 10:59:17 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:17 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:17 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:17 AM] [3/16/2011 10:59:17 AM] Writting Target Memory...ERROR [3/16/2011 10:59:17 AM] ERROR: Wrong response from the RIFF Box. [3/16/2011 10:59:17 AM] [FINISH OPERATION_ID = DIRECT_WRITE_MEMORY] [3/16/2011 10:59:18 AM] [START OPERATION_ID = DIRECT_WRITE_MEMORY] [3/16/2011 10:59:18 AM] Open serial port...OK [3/16/2011 10:59:18 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:18 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:18 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:18 AM] [3/16/2011 10:59:18 AM] Writting Target Memory...ERROR [3/16/2011 10:59:18 AM] ERROR: Wrong response from the RIFF Box. [3/16/2011 10:59:18 AM] [FINISH OPERATION_ID = DIRECT_WRITE_MEMORY] [3/16/2011 10:59:18 AM] [START OPERATION_ID = DIRECT_WRITE_MEMORY] [3/16/2011 10:59:19 AM] Open serial port...OK [3/16/2011 10:59:19 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:19 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:19 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:19 AM] [3/16/2011 10:59:19 AM] Writting Target Memory...ERROR [3/16/2011 10:59:19 AM] ERROR: Wrong response from the RIFF Box. [3/16/2011 10:59:19 AM] [FINISH OPERATION_ID = DIRECT_WRITE_MEMORY] [3/16/2011 10:59:19 AM] [START OPERATION_ID = DIRECT_WRITE_MEMORY] [3/16/2011 10:59:19 AM] Open serial port...OK [3/16/2011 10:59:19 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:19 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:19 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:19 AM] [3/16/2011 10:59:19 AM] Writting Target Memory...ERROR [3/16/2011 10:59:19 AM] ERROR: Wrong response from the RIFF Box. [3/16/2011 10:59:19 AM] [FINISH OPERATION_ID = DIRECT_WRITE_MEMORY] [3/16/2011 10:59:21 AM] [START OPERATION_ID = DIRECT_READ_MEMORY] [3/16/2011 10:59:26 AM] Open serial port...OK [3/16/2011 10:59:26 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:26 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:26 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:26 AM] [3/16/2011 10:59:26 AM] Reading Target Memory...ERROR [3/16/2011 10:59:26 AM] ERROR: No response from the RIFF Box. [3/16/2011 10:59:26 AM] [FINISH OPERATION_ID = DIRECT_READ_MEMORY] [3/16/2011 10:59:27 AM] [START OPERATION_ID = DIRECT_READ_MEMORY] [3/16/2011 10:59:32 AM] Open serial port...OK [3/16/2011 10:59:32 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:32 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:32 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:32 AM] [3/16/2011 10:59:32 AM] Reading Target Memory...ERROR [3/16/2011 10:59:32 AM] ERROR: No response from the RIFF Box. [3/16/2011 10:59:32 AM] [FINISH OPERATION_ID = DIRECT_READ_MEMORY] [3/16/2011 10:59:33 AM] [START OPERATION_ID = EXECUTE_TARGET] [3/16/2011 10:59:33 AM] Open serial port...OK [3/16/2011 10:59:33 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:33 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:33 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:33 AM] [3/16/2011 10:59:33 AM] Target GO from PC = 0x00100000...FAILED [3/16/2011 10:59:33 AM] ERROR: Failed setting Core into Running state. Terminating. [3/16/2011 10:59:33 AM] [FINISH OPERATION_ID = EXECUTE_TARGET] [3/16/2011 10:59:37 AM] [START OPERATION_ID = HALT_TARGET] [3/16/2011 10:59:37 AM] Open serial port...OK [3/16/2011 10:59:37 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:37 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:37 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:37 AM] [3/16/2011 10:59:37 AM] Halting target...OK [3/16/2011 10:59:37 AM] STATUS: Target is halted. [3/16/2011 10:59:37 AM] [3/16/2011 10:59:37 AM] R0 = 0x00000009 R6 = 0x00000000 R12 = 0x00450460 [3/16/2011 10:59:37 AM] R1 = 0x0000002C R7 = 0x401E0000 R13 = 0x302F4A28 [3/16/2011 10:59:37 AM] R2 = 0x40000000 R8 = 0x00000000 R14 = 0x00000048 [3/16/2011 10:59:37 AM] R3 = 0x00000000 R9 = 0x00000000 R15 = 0x00321284 [3/16/2011 10:59:37 AM] R4 = 0x00021550 R10 = 0x00000000 CPSR = 0x000000F3 [3/16/2011 10:59:37 AM] R5 = 0x00000043 R11 = 0x00000000 [3/16/2011 10:59:37 AM] [FINISH OPERATION_ID = HALT_TARGET] [3/16/2011 10:59:39 AM] [START OPERATION_ID = HALT_TARGET] [3/16/2011 10:59:39 AM] Open serial port...OK [3/16/2011 10:59:39 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:39 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:39 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:39 AM] [3/16/2011 10:59:39 AM] Halting target...OK [3/16/2011 10:59:39 AM] STATUS: Target was already halted. [3/16/2011 10:59:39 AM] [3/16/2011 10:59:39 AM] R0 = 0x00000009 R6 = 0x00000000 R12 = 0x00450460 [3/16/2011 10:59:39 AM] R1 = 0x0000002C R7 = 0x401E0000 R13 = 0x302F4A28 [3/16/2011 10:59:39 AM] R2 = 0x40000000 R8 = 0x00000000 R14 = 0x00000048 [3/16/2011 10:59:39 AM] R3 = 0x00000000 R9 = 0x00000000 R15 = 0x00321284 [3/16/2011 10:59:39 AM] R4 = 0x00021550 R10 = 0x00000000 CPSR = 0x000000F3 [3/16/2011 10:59:39 AM] R5 = 0x00000043 R11 = 0x00000000 [3/16/2011 10:59:39 AM] [FINISH OPERATION_ID = HALT_TARGET] [3/16/2011 10:59:41 AM] [START OPERATION_ID = RESET_TARGET] [3/16/2011 10:59:42 AM] Open serial port...OK [3/16/2011 10:59:42 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:42 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:42 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:42 AM] [3/16/2011 10:59:42 AM] Resetting target...OK [3/16/2011 10:59:42 AM] STATUS: Target is halted. [3/16/2011 10:59:42 AM] [3/16/2011 10:59:42 AM] R0 = 0x8000074C R6 = 0x00000000 R12 = 0x00450460 [3/16/2011 10:59:42 AM] R1 = 0x00000007 R7 = 0x401E0000 R13 = 0x302F4A28 [3/16/2011 10:59:42 AM] R2 = 0x40000000 R8 = 0x00000000 R14 = 0x00000048 [3/16/2011 10:59:42 AM] R3 = 0x00000000 R9 = 0x00000000 R15 = 0x00000000 [3/16/2011 10:59:42 AM] R4 = 0x00021550 R10 = 0x00000000 CPSR = 0x000000D3 [3/16/2011 10:59:42 AM] R5 = 0x00000043 R11 = 0x00000000 [3/16/2011 10:59:42 AM] [FINISH OPERATION_ID = RESET_TARGET] [3/16/2011 10:59:43 AM] [START OPERATION_ID = READ_ICE_REGS] [3/16/2011 10:59:43 AM] Open serial port...OK [3/16/2011 10:59:43 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:43 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:43 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:43 AM] [3/16/2011 10:59:43 AM] Getting EmbeddedICE-RT registers...OK [3/16/2011 10:59:43 AM] 00 = 0x00000005 08 = 0x00000000 10 = 0x00000000 [3/16/2011 10:59:43 AM] 01 = 0x000002CD 09 = 0x00000000 11 = 0x00000000 [3/16/2011 10:59:43 AM] 02 = 0x00000000 0A = 0x00000000 12 = 0x00000000 [3/16/2011 10:59:43 AM] 03 = 0x000002CD 0B = 0x00000000 13 = 0x00000000 [3/16/2011 10:59:43 AM] 04 = 0x60000000 0C = 0x00000000 14 = 0x00000000 [3/16/2011 10:59:43 AM] 05 = 0x00000000 0D = 0x000000F7 15 = 0x000000F7 [3/16/2011 10:59:43 AM] 06 = 0x60000000 0E = 0x00000000 16 = 0x00000000 [3/16/2011 10:59:43 AM] 07 = 0x00000000 0F = 0x00000000 17 = 0x00000000 [3/16/2011 10:59:43 AM] [FINISH OPERATION_ID = READ_ICE_REGS] [3/16/2011 10:59:45 AM] [START OPERATION_ID = DIRECT_READ_MEMORY] [3/16/2011 10:59:49 AM] Open serial port...OK [3/16/2011 10:59:49 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:49 AM] Firmware Version |
03-16-2011, 06:45 | #6 (permalink) |
Freak Poster Join Date: Dec 2007 Location: Delhi.India
Posts: 290
Member: 652685 Status: Offline Sonork: 100.1594842 Thanks Meter: 45 | Please have the log [3/16/2011 10:02:12 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:02:12 AM] Open serial port...OK [3/16/2011 10:02:12 AM] Connecting to the RIFF Box...OK [3/16/2011 10:02:12 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:02:12 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:02:12 AM] [3/16/2011 10:02:12 AM] Connecting to the dead body...OK [3/16/2011 10:02:12 AM] Detected dead body ID: 0x220B10E1 - WRONG!!! [3/16/2011 10:02:12 AM] ERROR: Current ID does not belong to the ZTE S100 family. [3/16/2011 10:02:12 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:02:17 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:02:18 AM] Open serial port...OK [3/16/2011 10:02:18 AM] Connecting to the RIFF Box...OK [3/16/2011 10:02:18 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:02:18 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:02:18 AM] [3/16/2011 10:02:18 AM] Connecting to the dead body...OK [3/16/2011 10:02:18 AM] Detected dead body ID: 0x220B10E1 - IGNORED! [3/16/2011 10:02:18 AM] Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK [3/16/2011 10:02:18 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:02:18 AM] [3/16/2011 10:02:18 AM] Resurrection sequence started. [3/16/2011 10:02:18 AM] Establish communication with the phone...OK [3/16/2011 10:02:18 AM] Initializing internal hardware configuration...OK [3/16/2011 10:02:18 AM] Uploading resurrector data into memory...FAILED [3/16/2011 10:02:18 AM] ERROR: RAM memory selftest failed. [3/16/2011 10:02:18 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:02:20 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:02:20 AM] Open serial port...OK [3/16/2011 10:02:20 AM] Connecting to the RIFF Box...OK [3/16/2011 10:02:20 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:02:20 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:02:20 AM] [3/16/2011 10:02:20 AM] Connecting to the dead body...OK [3/16/2011 10:02:20 AM] Detected dead body ID: 0x220B10E1 - IGNORED! [3/16/2011 10:02:20 AM] Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK [3/16/2011 10:02:20 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:02:20 AM] [3/16/2011 10:02:20 AM] Resurrection sequence started. [3/16/2011 10:02:20 AM] Establish communication with the phone...OK [3/16/2011 10:02:20 AM] Initializing internal hardware configuration...OK [3/16/2011 10:02:20 AM] Uploading resurrector data into memory...FAILED [3/16/2011 10:02:20 AM] ERROR: RAM memory selftest failed. [3/16/2011 10:02:20 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:02:21 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:02:21 AM] Open serial port...OK [3/16/2011 10:02:21 AM] Connecting to the RIFF Box...OK [3/16/2011 10:02:21 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:02:21 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:02:21 AM] [3/16/2011 10:02:21 AM] Connecting to the dead body...OK [3/16/2011 10:02:21 AM] Detected dead body ID: 0x220B10E1 - IGNORED! [3/16/2011 10:02:21 AM] Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK [3/16/2011 10:02:21 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:02:21 AM] [3/16/2011 10:02:21 AM] Resurrection sequence started. [3/16/2011 10:02:21 AM] Establish communication with the phone...OK [3/16/2011 10:02:21 AM] Initializing internal hardware configuration...OK [3/16/2011 10:02:21 AM] Uploading resurrector data into memory...FAILED [3/16/2011 10:02:21 AM] ERROR: RAM memory selftest failed. [3/16/2011 10:02:21 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:02:21 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:02:22 AM] Open serial port...OK [3/16/2011 10:02:22 AM] Connecting to the RIFF Box...OK [3/16/2011 10:02:22 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:02:22 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:02:22 AM] [3/16/2011 10:02:22 AM] Connecting to the dead body...OK [3/16/2011 10:02:22 AM] Detected dead body ID: 0x220B10E1 - IGNORED! [3/16/2011 10:02:22 AM] Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK [3/16/2011 10:02:22 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:02:22 AM] [3/16/2011 10:02:22 AM] Resurrection sequence started. [3/16/2011 10:02:22 AM] Establish communication with the phone...OK [3/16/2011 10:02:22 AM] Initializing internal hardware configuration...OK [3/16/2011 10:02:22 AM] Uploading resurrector data into memory...FAILED [3/16/2011 10:02:22 AM] ERROR: RAM memory selftest failed. [3/16/2011 10:02:22 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:02:28 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:02:29 AM] Open serial port...OK [3/16/2011 10:02:29 AM] Connecting to the RIFF Box...OK [3/16/2011 10:02:29 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:02:29 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:02:29 AM] [3/16/2011 10:02:29 AM] Connecting to the dead body...OK [3/16/2011 10:02:29 AM] Detected dead body ID: 0x220B10E1 - IGNORED! [3/16/2011 10:02:29 AM] Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK [3/16/2011 10:02:29 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:02:29 AM] [3/16/2011 10:02:29 AM] Resurrection sequence started. [3/16/2011 10:02:29 AM] Establish communication with the phone...OK [3/16/2011 10:02:29 AM] Initializing internal hardware configuration...OK [3/16/2011 10:02:29 AM] Uploading resurrector data into memory...OK [3/16/2011 10:02:29 AM] Starting communication with resurrector...OK [3/16/2011 10:02:29 AM] [3/16/2011 10:02:29 AM] Detected an Initialized FLASH1 Chip ID: 0x0098/0x0096 (8MB) [3/16/2011 10:02:29 AM] [3/16/2011 10:02:29 AM] Invalid length. It should not be zero. [3/16/2011 10:02:29 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:02:30 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:02:31 AM] Open serial port...OK [3/16/2011 10:02:31 AM] Connecting to the RIFF Box...OK [3/16/2011 10:02:31 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:02:31 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:02:31 AM] [3/16/2011 10:02:31 AM] Connecting to the dead body...OK [3/16/2011 10:02:31 AM] Detected dead body ID: 0x220B10E1 - IGNORED! [3/16/2011 10:02:31 AM] Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK [3/16/2011 10:02:31 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:02:31 AM] [3/16/2011 10:02:31 AM] Resurrection sequence started. [3/16/2011 10:02:31 AM] Establish communication with the phone...OK [3/16/2011 10:02:31 AM] Initializing internal hardware configuration...OK [3/16/2011 10:02:31 AM] Uploading resurrector data into memory...OK [3/16/2011 10:02:31 AM] Starting communication with resurrector...OK [3/16/2011 10:02:31 AM] [3/16/2011 10:02:31 AM] Detected an Initialized FLASH1 Chip ID: 0x0098/0x0096 (8MB) [3/16/2011 10:02:31 AM] [3/16/2011 10:02:31 AM] Invalid length. It should not be zero. [3/16/2011 10:02:31 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:02:32 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:02:33 AM] Open serial port...OK [3/16/2011 10:02:33 AM] Connecting to the RIFF Box...OK [3/16/2011 10:02:33 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:02:33 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:02:33 AM] [3/16/2011 10:02:33 AM] Connecting to the dead body...OK [3/16/2011 10:02:33 AM] Detected dead body ID: 0x220B10E1 - IGNORED! [3/16/2011 10:02:33 AM] Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK [3/16/2011 10:02:33 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:02:33 AM] [3/16/2011 10:02:33 AM] Resurrection sequence started. [3/16/2011 10:02:33 AM] Establish communication with the phone...OK [3/16/2011 10:02:33 AM] Initializing internal hardware configuration...OK [3/16/2011 10:02:33 AM] Uploading resurrector data into memory...OK [3/16/2011 10:02:33 AM] Starting communication with resurrector...OK [3/16/2011 10:02:33 AM] [3/16/2011 10:02:33 AM] Detected an Initialized FLASH1 Chip ID: 0x0098/0x0096 (8MB) [3/16/2011 10:02:33 AM] [3/16/2011 10:02:33 AM] Invalid length. It should not be zero. [3/16/2011 10:02:33 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:02:36 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:03:06 AM] Open serial port...OK [3/16/2011 10:03:06 AM] Connecting to the RIFF Box...OK [3/16/2011 10:03:06 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:03:06 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:03:06 AM] [3/16/2011 10:03:06 AM] Connecting to the dead body...OK [3/16/2011 10:03:06 AM] Detected dead body ID: 0x220B10E1 - IGNORED! [3/16/2011 10:03:06 AM] Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK [3/16/2011 10:03:06 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:03:06 AM] [3/16/2011 10:03:06 AM] Resurrection sequence started. [3/16/2011 10:03:06 AM] Establish communication with the phone...OK [3/16/2011 10:03:06 AM] Initializing internal hardware configuration...OK [3/16/2011 10:03:06 AM] Uploading resurrector data into memory...OK [3/16/2011 10:03:06 AM] Starting communication with resurrector...OK [3/16/2011 10:03:06 AM] [3/16/2011 10:03:06 AM] Detected an Initialized FLASH1 Chip ID: 0x0098/0x0096 (8MB) [3/16/2011 10:03:06 AM] [3/16/2011 10:03:06 AM] Reading FLASH1 address space from 0x00000000 to 0x007FFFFF [3/16/2011 10:03:06 AM] Completed in 00:00:29.344 (Average Transfer Rate: 279.17 kB/s) [3/16/2011 10:03:06 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:03:38 AM] ------------------------------- JTAG Manager Session Closed ------------------------------- [3/16/2011 10:51:11 AM] ------------------------------- JTAG Manager Session Opened ------------------------------- [3/16/2011 10:51:11 AM] JTAG Manger Version: 1.28 [3/16/2011 10:51:11 AM] ------------------------------------------------------------------------------------------- [3/16/2011 10:51:41 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:42 AM] Open serial port...OK [3/16/2011 10:51:42 AM] Connecting to the RIFF Box...OK [3/16/2011 10:51:42 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:51:42 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:51:42 AM] [3/16/2011 10:51:42 AM] Connecting to the dead body... [3/16/2011 10:51:42 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.33V [3/16/2011 10:51:42 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:45 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:46 AM] Open serial port...OK [3/16/2011 10:51:46 AM] Connecting to the RIFF Box...OK [3/16/2011 10:51:46 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:51:46 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:51:46 AM] [3/16/2011 10:51:46 AM] Connecting to the dead body... [3/16/2011 10:51:46 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.23V [3/16/2011 10:51:46 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:47 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:47 AM] Open serial port...OK [3/16/2011 10:51:47 AM] Connecting to the RIFF Box...OK [3/16/2011 10:51:47 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:51:47 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:51:47 AM] [3/16/2011 10:51:47 AM] Connecting to the dead body... [3/16/2011 10:51:47 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 4.56V [3/16/2011 10:51:47 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:47 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:48 AM] Open serial port...OK [3/16/2011 10:51:48 AM] Connecting to the RIFF Box...OK [3/16/2011 10:51:48 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:51:48 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:51:48 AM] [3/16/2011 10:51:48 AM] Connecting to the dead body... [3/16/2011 10:51:48 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 4.62V [3/16/2011 10:51:48 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:48 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:48 AM] Open serial port...OK [3/16/2011 10:51:48 AM] Connecting to the RIFF Box...OK [3/16/2011 10:51:48 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:51:48 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:51:48 AM] [3/16/2011 10:51:48 AM] Connecting to the dead body... [3/16/2011 10:51:48 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 4.26V [3/16/2011 10:51:48 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:49 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:49 AM] Open serial port...OK [3/16/2011 10:51:49 AM] Connecting to the RIFF Box...OK [3/16/2011 10:51:49 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:51:49 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:51:49 AM] [3/16/2011 10:51:49 AM] Connecting to the dead body... [3/16/2011 10:51:49 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 4.45V [3/16/2011 10:51:49 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:50 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:50 AM] Open serial port...OK [3/16/2011 10:51:50 AM] Connecting to the RIFF Box...OK [3/16/2011 10:51:50 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:51:50 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:51:50 AM] [3/16/2011 10:51:50 AM] Connecting to the dead body... [3/16/2011 10:51:50 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 4.43V [3/16/2011 10:51:50 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:50 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:50 AM] Open serial port...OK [3/16/2011 10:51:50 AM] Connecting to the RIFF Box...OK [3/16/2011 10:51:50 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:51:50 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:51:50 AM] [3/16/2011 10:51:50 AM] Connecting to the dead body... [3/16/2011 10:51:50 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 4.46V [3/16/2011 10:51:50 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:51 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:51 AM] Open serial port...OK [3/16/2011 10:51:51 AM] Connecting to the RIFF Box...OK [3/16/2011 10:51:51 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:51:51 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:51:51 AM] [3/16/2011 10:51:51 AM] Connecting to the dead body... [3/16/2011 10:51:51 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 4.43V [3/16/2011 10:51:51 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:55 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:55 AM] Open serial port...OK [3/16/2011 10:51:55 AM] Connecting to the RIFF Box...OK [3/16/2011 10:51:55 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:51:55 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:51:55 AM] [3/16/2011 10:51:55 AM] Connecting to the dead body... [3/16/2011 10:51:55 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 4.52V [3/16/2011 10:51:55 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:56 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:56 AM] Open serial port...OK [3/16/2011 10:51:56 AM] Connecting to the RIFF Box...OK [3/16/2011 10:51:56 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:51:56 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:51:56 AM] [3/16/2011 10:51:56 AM] Connecting to the dead body... [3/16/2011 10:51:56 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 4.26V [3/16/2011 10:51:56 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:57 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:51:57 AM] Open serial port...OK [3/16/2011 10:51:57 AM] Connecting to the RIFF Box...OK [3/16/2011 10:51:57 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:51:57 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:51:57 AM] [3/16/2011 10:51:57 AM] Connecting to the dead body... [3/16/2011 10:51:57 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 4.48V [3/16/2011 10:51:57 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:52:11 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:52:12 AM] Open serial port...OK [3/16/2011 10:52:12 AM] Connecting to the RIFF Box...OK [3/16/2011 10:52:12 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:52:12 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:52:12 AM] [3/16/2011 10:52:12 AM] Connecting to the dead body... [3/16/2011 10:52:12 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.23V [3/16/2011 10:52:12 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:52:13 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:52:13 AM] Open serial port...OK [3/16/2011 10:52:13 AM] Connecting to the RIFF Box...OK [3/16/2011 10:52:13 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:52:13 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:52:13 AM] [3/16/2011 10:52:13 AM] Connecting to the dead body... [3/16/2011 10:52:13 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.21V [3/16/2011 10:52:13 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:52:30 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:52:31 AM] Open serial port...OK [3/16/2011 10:52:31 AM] Connecting to the RIFF Box...OK [3/16/2011 10:52:31 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:52:31 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:52:31 AM] [3/16/2011 10:52:31 AM] Connecting to the dead body... [3/16/2011 10:52:31 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.25V [3/16/2011 10:52:31 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:52:31 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:52:32 AM] Open serial port...OK [3/16/2011 10:52:32 AM] Connecting to the RIFF Box...OK [3/16/2011 10:52:32 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:52:32 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:52:32 AM] [3/16/2011 10:52:32 AM] Connecting to the dead body... [3/16/2011 10:52:32 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.28V [3/16/2011 10:52:32 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:52:40 AM] [START OPERATION_ID = RESTART_TARGET] [3/16/2011 10:52:41 AM] Open serial port...OK [3/16/2011 10:52:41 AM] Connecting to the RIFF Box...OK [3/16/2011 10:52:41 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:52:41 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:52:41 AM] [3/16/2011 10:52:41 AM] Restarting target (nRST Low then High)...OK [3/16/2011 10:52:41 AM] [FINISH OPERATION_ID = RESTART_TARGET] [3/16/2011 10:52:44 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:52:45 AM] Open serial port...OK [3/16/2011 10:52:45 AM] Connecting to the RIFF Box...OK [3/16/2011 10:52:45 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:52:45 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:52:45 AM] [3/16/2011 10:52:45 AM] Connecting to the dead body...ERROR [3/16/2011 10:52:45 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.24V [3/16/2011 10:52:45 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:52:46 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:52:47 AM] Open serial port...OK [3/16/2011 10:52:47 AM] Connecting to the RIFF Box...OK [3/16/2011 10:52:47 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:52:47 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:52:47 AM] [3/16/2011 10:52:47 AM] Connecting to the dead body...ERROR [3/16/2011 10:52:47 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.24V [3/16/2011 10:52:47 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:52:47 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:52:48 AM] Open serial port...OK [3/16/2011 10:52:48 AM] Connecting to the RIFF Box...OK [3/16/2011 10:52:48 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:52:48 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:52:48 AM] [3/16/2011 10:52:48 AM] Connecting to the dead body...ERROR [3/16/2011 10:52:48 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.27V [3/16/2011 10:52:48 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:52:48 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:52:49 AM] Open serial port...OK [3/16/2011 10:52:49 AM] Connecting to the RIFF Box...OK [3/16/2011 10:52:49 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:52:49 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:52:49 AM] [3/16/2011 10:52:49 AM] Connecting to the dead body...ERROR [3/16/2011 10:52:49 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.24V [3/16/2011 10:52:49 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:53:43 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:53:44 AM] Open serial port...OK [3/16/2011 10:53:44 AM] Connecting to the RIFF Box...OK [3/16/2011 10:53:44 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:53:44 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:53:44 AM] [3/16/2011 10:53:44 AM] Connecting to the dead body...ERROR [3/16/2011 10:53:44 AM] Set I/O Voltage reads as 2.58V, TCK Frequency is RTCK [3/16/2011 10:53:44 AM] Model selected: HAIER - Haier C2076 [3/16/2011 10:53:44 AM] [3/16/2011 10:53:44 AM] None is detected. [3/16/2011 10:53:44 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:53:45 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:53:45 AM] Open serial port...OK [3/16/2011 10:53:45 AM] Connecting to the RIFF Box...OK [3/16/2011 10:53:45 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:53:45 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:53:45 AM] [3/16/2011 10:53:45 AM] Connecting to the dead body...ERROR [3/16/2011 10:53:45 AM] Set I/O Voltage reads as 2.58V, TCK Frequency is RTCK [3/16/2011 10:53:45 AM] Model selected: HAIER - Haier C2076 [3/16/2011 10:53:45 AM] [3/16/2011 10:53:45 AM] None is detected. [3/16/2011 10:53:45 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:53:49 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:00 AM] Open serial port...OK [3/16/2011 10:54:00 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:00 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:00 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:54:00 AM] [3/16/2011 10:54:00 AM] Connecting to the dead body...OK [3/16/2011 10:54:00 AM] Detected dead body ID: 0x200BB0E1 - IGNORED! [3/16/2011 10:54:00 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.25V [3/16/2011 10:54:00 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:03 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:03 AM] Open serial port...OK [3/16/2011 10:54:03 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:03 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:03 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:54:03 AM] [3/16/2011 10:54:03 AM] Connecting to the dead body... [3/16/2011 10:54:03 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.25V [3/16/2011 10:54:03 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:04 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:04 AM] Open serial port...OK [3/16/2011 10:54:04 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:04 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:04 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:54:04 AM] [3/16/2011 10:54:04 AM] Connecting to the dead body... [3/16/2011 10:54:04 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.21V [3/16/2011 10:54:04 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:05 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:05 AM] Open serial port...OK [3/16/2011 10:54:05 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:05 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:05 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:54:05 AM] [3/16/2011 10:54:05 AM] Connecting to the dead body... [3/16/2011 10:54:05 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.26V [3/16/2011 10:54:05 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:14 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:14 AM] Open serial port...OK [3/16/2011 10:54:14 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:14 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:14 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:54:14 AM] [3/16/2011 10:54:14 AM] Connecting to the dead body... [3/16/2011 10:54:14 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 4.45V [3/16/2011 10:54:14 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:15 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:15 AM] Open serial port...OK [3/16/2011 10:54:15 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:15 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:15 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:54:15 AM] [3/16/2011 10:54:15 AM] Connecting to the dead body... [3/16/2011 10:54:15 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 4.46V [3/16/2011 10:54:15 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:21 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:21 AM] Open serial port...OK [3/16/2011 10:54:21 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:21 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:21 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:54:21 AM] [3/16/2011 10:54:21 AM] Connecting to the dead body... [3/16/2011 10:54:21 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 4.34V [3/16/2011 10:54:21 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:22 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:22 AM] Open serial port...OK [3/16/2011 10:54:22 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:22 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:22 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:54:22 AM] [3/16/2011 10:54:22 AM] Connecting to the dead body... [3/16/2011 10:54:22 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 4.49V [3/16/2011 10:54:22 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:30 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:30 AM] Open serial port...OK [3/16/2011 10:54:30 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:30 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:30 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:54:30 AM] [3/16/2011 10:54:30 AM] Connecting to the dead body... [3/16/2011 10:54:30 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 4.49V [3/16/2011 10:54:30 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:31 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:31 AM] Open serial port...OK [3/16/2011 10:54:31 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:31 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:31 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:54:31 AM] [3/16/2011 10:54:31 AM] Connecting to the dead body... [3/16/2011 10:54:31 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 4.46V [3/16/2011 10:54:31 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:54:34 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:35 AM] Open serial port...OK [3/16/2011 10:54:35 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:35 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:35 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:54:35 AM] [3/16/2011 10:54:35 AM] Connecting to the dead body... [3/16/2011 10:54:35 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.14V [3/16/2011 10:54:35 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:36 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:36 AM] Open serial port...OK [3/16/2011 10:54:36 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:36 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:36 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:54:36 AM] [3/16/2011 10:54:36 AM] Connecting to the dead body... [3/16/2011 10:54:36 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.10V [3/16/2011 10:54:36 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:37 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:37 AM] Open serial port...OK [3/16/2011 10:54:37 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:37 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:37 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:54:37 AM] [3/16/2011 10:54:37 AM] Connecting to the dead body... [3/16/2011 10:54:37 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.10V [3/16/2011 10:54:37 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:38 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:38 AM] Open serial port...OK [3/16/2011 10:54:38 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:38 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:38 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:54:38 AM] [3/16/2011 10:54:38 AM] Connecting to the dead body... [3/16/2011 10:54:38 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.06V [3/16/2011 10:54:38 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:50 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:51 AM] Open serial port...OK [3/16/2011 10:54:51 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:51 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:51 AM] Selected Custom Target: [ARM926, 3.30V, TAP0] [3/16/2011 10:54:51 AM] [3/16/2011 10:54:51 AM] Connecting to the ARM926 target...ERROR [3/16/2011 10:54:51 AM] ERROR: Set I/O Voltage to 3.30V failed. Real reading is 5.86V [3/16/2011 10:54:51 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:52 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:52 AM] Open serial port...OK [3/16/2011 10:54:52 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:52 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:52 AM] Selected Custom Target: [ARM926, 3.30V, TAP0] [3/16/2011 10:54:52 AM] [3/16/2011 10:54:52 AM] Connecting to the ARM926 target...ERROR [3/16/2011 10:54:52 AM] ERROR: Set I/O Voltage to 3.30V failed. Real reading is 5.86V [3/16/2011 10:54:52 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:53 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:54 AM] Open serial port...OK [3/16/2011 10:54:54 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:54 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:54 AM] Selected Custom Target: [ARM926, 3.30V, TAP0] [3/16/2011 10:54:54 AM] [3/16/2011 10:54:54 AM] Connecting to the ARM926 target...ERROR [3/16/2011 10:54:54 AM] ERROR: Set I/O Voltage to 3.30V failed. Real reading is 5.90V [3/16/2011 10:54:54 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:56 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:57 AM] Open serial port...OK [3/16/2011 10:54:57 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:57 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:57 AM] Selected Custom Target: [ARM926, 1.75V, TAP0] [3/16/2011 10:54:57 AM] [3/16/2011 10:54:57 AM] Connecting to the ARM926 target...ERROR [3/16/2011 10:54:57 AM] ERROR: Set I/O Voltage to 1.75V failed. Real reading is 4.70V [3/16/2011 10:54:57 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:57 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:54:58 AM] Open serial port...OK [3/16/2011 10:54:58 AM] Connecting to the RIFF Box...OK [3/16/2011 10:54:58 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:54:58 AM] Selected Custom Target: [ARM926, 1.75V, TAP0] [3/16/2011 10:54:58 AM] [3/16/2011 10:54:58 AM] Connecting to the ARM926 target...ERROR [3/16/2011 10:54:58 AM] ERROR: Set I/O Voltage to 1.75V failed. Real reading is 4.68V [3/16/2011 10:54:58 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:55:37 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:55:38 AM] Open serial port...OK [3/16/2011 10:55:38 AM] Connecting to the RIFF Box...OK [3/16/2011 10:55:38 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:55:38 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:55:38 AM] [3/16/2011 10:55:38 AM] Connecting to the dead body...OK [3/16/2011 10:55:38 AM] Detected dead body ID: 0x200B10E1 - IGNORED! [3/16/2011 10:55:38 AM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK [3/16/2011 10:55:38 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:55:38 AM] [3/16/2011 10:55:38 AM] Resurrection sequence started. [3/16/2011 10:55:38 AM] Establish communication with the phone...OK [3/16/2011 10:55:38 AM] Initializing internal hardware configuration...OK [3/16/2011 10:55:38 AM] Uploading resurrector data into memory...FAILED [3/16/2011 10:55:38 AM] ERROR: RAM memory selftest failed. [3/16/2011 10:55:38 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:55:41 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:55:41 AM] Open serial port...OK [3/16/2011 10:55:41 AM] Connecting to the RIFF Box...OK [3/16/2011 10:55:41 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:55:41 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:55:41 AM] [3/16/2011 10:55:41 AM] Connecting to the dead body...OK [3/16/2011 10:55:41 AM] Detected dead body ID: 0x200B10E1 - IGNORED! [3/16/2011 10:55:41 AM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK [3/16/2011 10:55:41 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:55:41 AM] [3/16/2011 10:55:41 AM] Resurrection sequence started. [3/16/2011 10:55:41 AM] Establish communication with the phone...OK [3/16/2011 10:55:41 AM] Initializing internal hardware configuration...OK [3/16/2011 10:55:41 AM] Uploading resurrector data into memory...FAILED [3/16/2011 10:55:41 AM] ERROR: RAM memory selftest failed. [3/16/2011 10:55:41 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:55:42 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:55:42 AM] Open serial port...OK [3/16/2011 10:55:42 AM] Connecting to the RIFF Box...OK [3/16/2011 10:55:42 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:55:42 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:55:42 AM] [3/16/2011 10:55:42 AM] Connecting to the dead body...OK [3/16/2011 10:55:42 AM] Detected dead body ID: 0x200B10E1 - IGNORED! [3/16/2011 10:55:42 AM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK [3/16/2011 10:55:42 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:55:42 AM] [3/16/2011 10:55:42 AM] Resurrection sequence started. [3/16/2011 10:55:42 AM] Establish communication with the phone...OK [3/16/2011 10:55:42 AM] Initializing internal hardware configuration...OK [3/16/2011 10:55:42 AM] Uploading resurrector data into memory...FAILED [3/16/2011 10:55:42 AM] ERROR: RAM memory selftest failed. [3/16/2011 10:55:42 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:55:43 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:55:43 AM] Open serial port...OK [3/16/2011 10:55:43 AM] Connecting to the RIFF Box...OK [3/16/2011 10:55:43 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:55:43 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:55:43 AM] [3/16/2011 10:55:43 AM] Connecting to the dead body...OK [3/16/2011 10:55:43 AM] Detected dead body ID: 0x200B10E1 - IGNORED! [3/16/2011 10:55:43 AM] Set I/O Voltage reads as 2.58V, TCK Frequency is RTCK [3/16/2011 10:55:43 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:55:43 AM] [3/16/2011 10:55:43 AM] Resurrection sequence started. [3/16/2011 10:55:43 AM] Establish communication with the phone...OK [3/16/2011 10:55:43 AM] Initializing internal hardware configuration...OK [3/16/2011 10:55:43 AM] Uploading resurrector data into memory...FAILED [3/16/2011 10:55:43 AM] ERROR: RAM memory selftest failed. [3/16/2011 10:55:43 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:55:55 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:55:56 AM] Open serial port...OK [3/16/2011 10:55:56 AM] Connecting to the RIFF Box...OK [3/16/2011 10:55:56 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:55:56 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:55:56 AM] [3/16/2011 10:55:56 AM] Connecting to the dead body...OK [3/16/2011 10:55:56 AM] Detected dead body ID: 0x200B10E1 - IGNORED! [3/16/2011 10:55:56 AM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK [3/16/2011 10:55:56 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:55:56 AM] [3/16/2011 10:55:56 AM] Resurrection sequence started. [3/16/2011 10:55:56 AM] Establish communication with the phone...OK [3/16/2011 10:55:56 AM] Initializing internal hardware configuration...OK [3/16/2011 10:55:56 AM] Uploading resurrector data into memory...FAILED [3/16/2011 10:55:56 AM] ERROR: RAM memory selftest failed. [3/16/2011 10:55:56 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:55:56 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:55:57 AM] Open serial port...OK [3/16/2011 10:55:57 AM] Connecting to the RIFF Box...OK [3/16/2011 10:55:57 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:55:57 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:55:57 AM] [3/16/2011 10:55:57 AM] Connecting to the dead body...OK [3/16/2011 10:55:57 AM] Detected dead body ID: 0x200B10E1 - IGNORED! [3/16/2011 10:55:57 AM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK [3/16/2011 10:55:57 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:55:57 AM] [3/16/2011 10:55:57 AM] Resurrection sequence started. [3/16/2011 10:55:57 AM] Establish communication with the phone...OK [3/16/2011 10:55:57 AM] Initializing internal hardware configuration...OK [3/16/2011 10:55:57 AM] Uploading resurrector data into memory...FAILED [3/16/2011 10:55:57 AM] ERROR: RAM memory selftest failed. [3/16/2011 10:55:57 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:55:57 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:55:58 AM] Open serial port...OK [3/16/2011 10:55:58 AM] Connecting to the RIFF Box...OK [3/16/2011 10:55:58 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:55:58 AM] Selected Resurrector: [Haier C2076] [3/16/2011 10:55:58 AM] [3/16/2011 10:55:58 AM] Connecting to the dead body...OK [3/16/2011 10:55:58 AM] Detected dead body ID: 0x200B10E1 - IGNORED! [3/16/2011 10:55:58 AM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK [3/16/2011 10:55:58 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:55:58 AM] [3/16/2011 10:55:58 AM] Resurrection sequence started. [3/16/2011 10:55:58 AM] Establish communication with the phone...OK [3/16/2011 10:55:58 AM] Initializing internal hardware configuration...OK [3/16/2011 10:55:58 AM] Uploading resurrector data into memory...FAILED [3/16/2011 10:55:58 AM] ERROR: RAM memory selftest failed. [3/16/2011 10:55:58 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:56:04 AM] [START OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:56:08 AM] Open serial port...OK [3/16/2011 10:56:08 AM] Connecting to the RIFF Box...OK [3/16/2011 10:56:08 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:56:08 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:56:08 AM] [3/16/2011 10:56:08 AM] Connecting to the dead body...OK [3/16/2011 10:56:08 AM] Detected dead body ID: 0x200B10E1 - IGNORED! [3/16/2011 10:56:08 AM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK [3/16/2011 10:56:08 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:56:08 AM] [3/16/2011 10:56:08 AM] Resurrection sequence started. [3/16/2011 10:56:08 AM] Establish communication with the phone...OK [3/16/2011 10:56:08 AM] Initializing internal hardware configuration...OK [3/16/2011 10:56:08 AM] Uploading resurrector data into memory...OK [3/16/2011 10:56:08 AM] Starting communication with resurrector...OK [3/16/2011 10:56:08 AM] [3/16/2011 10:56:08 AM] Detected an Initialized FLASH1 Chip ID: 0x00EC/0x2252 (8MB) [3/16/2011 10:56:08 AM] [3/16/2011 10:56:08 AM] Reading FLASH1 address space from 0x00000000 to 0x007FFFFF [3/16/2011 10:56:08 AM] Failed to receive answer to READ command. [3/16/2011 10:56:08 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY] [3/16/2011 10:56:14 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:56:14 AM] Open serial port...OK [3/16/2011 10:56:14 AM] Connecting to the RIFF Box...ERROR [3/16/2011 10:56:14 AM] ERROR: Wrong response from the RIFF Box. [3/16/2011 10:56:14 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:56:24 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:56:55 AM] Open serial port...OK [3/16/2011 10:56:55 AM] Connecting to the RIFF Box...OK [3/16/2011 10:56:55 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:56:55 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:56:55 AM] [3/16/2011 10:56:55 AM] Connecting to the dead body...OK [3/16/2011 10:56:55 AM] Detected dead body ID: 0x200B10E1 - IGNORED! [3/16/2011 10:56:55 AM] Set I/O Voltage reads as 2.58V, TCK Frequency is RTCK [3/16/2011 10:56:55 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:56:55 AM] [3/16/2011 10:56:55 AM] Resurrection sequence started. [3/16/2011 10:56:55 AM] Establish communication with the phone...OK [3/16/2011 10:56:55 AM] Initializing internal hardware configuration...OK [3/16/2011 10:56:55 AM] Uploading resurrector data into memory...OK [3/16/2011 10:56:55 AM] Starting communication with resurrector...OK [3/16/2011 10:56:55 AM] [3/16/2011 10:56:55 AM] Detected an Initialized FLASH1 Chip ID: 0x00EC/0x2252 (8MB) [3/16/2011 10:56:55 AM] [3/16/2011 10:56:55 AM] Writting FLASH1 memory from 0x00000000 to 0x007FFFFF [3/16/2011 10:56:55 AM] ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK [3/16/2011 10:56:55 AM] ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK [3/16/2011 10:56:55 AM] ERROR: Timeout while waiting for DCC Loader response. Trying to recover... [3/16/2011 10:56:55 AM] ERROR: Forced to Terminate. Terminated at 0x00000000 [3/16/2011 10:56:55 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:56:58 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:56:58 AM] Open serial port...OK [3/16/2011 10:56:58 AM] Connecting to the RIFF Box...OK [3/16/2011 10:56:58 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:56:58 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:56:58 AM] [3/16/2011 10:56:58 AM] Connecting to the dead body... [3/16/2011 10:56:58 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.09V [3/16/2011 10:56:58 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:56:59 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:56:59 AM] Open serial port...OK [3/16/2011 10:56:59 AM] Connecting to the RIFF Box...OK [3/16/2011 10:56:59 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:56:59 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:56:59 AM] [3/16/2011 10:56:59 AM] Connecting to the dead body... [3/16/2011 10:56:59 AM] ERROR: Set I/O Voltage to 2.60V failed. Real reading is 5.11V [3/16/2011 10:56:59 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:57:00 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:57:23 AM] Open serial port...OK [3/16/2011 10:57:23 AM] Connecting to the RIFF Box...OK [3/16/2011 10:57:23 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:57:23 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:57:23 AM] [3/16/2011 10:57:23 AM] Connecting to the dead body...OK [3/16/2011 10:57:23 AM] Detected dead body ID: 0x200B10E1 - IGNORED! [3/16/2011 10:57:23 AM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK [3/16/2011 10:57:23 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [3/16/2011 10:57:23 AM] [3/16/2011 10:57:23 AM] Resurrection sequence started. [3/16/2011 10:57:23 AM] Establish communication with the phone...OK [3/16/2011 10:57:23 AM] Initializing internal hardware configuration...OK [3/16/2011 10:57:23 AM] Uploading resurrector data into memory...OK [3/16/2011 10:57:23 AM] Starting communication with resurrector...OK [3/16/2011 10:57:23 AM] [3/16/2011 10:57:23 AM] Detected an Initialized FLASH1 Chip ID: 0x00EC/0x2252 (8MB) [3/16/2011 10:57:23 AM] [3/16/2011 10:57:23 AM] Writting FLASH1 memory from 0x00000000 to 0x007FFFFF [3/16/2011 10:57:23 AM] ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK [3/16/2011 10:57:23 AM] ERROR: Timeout while waiting for DCC Loader response. Trying to recover... [3/16/2011 10:57:23 AM] ERROR: Forced to Terminate. Terminated at 0x00000000 [3/16/2011 10:57:23 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:57:27 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:58:07 AM] Open serial port...OK [3/16/2011 10:58:07 AM] Connecting to the RIFF Box...OK [3/16/2011 10:58:07 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:58:07 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:58:07 AM] [3/16/2011 10:58:07 AM] Connecting to the dead body...OK [3/16/2011 10:58:07 AM] Detected dead body ID: 0x200B10E1 - IGNORED! [3/16/2011 10:58:07 AM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK [3/16/2011 10:58:07 AM] Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] [3/16/2011 10:58:07 AM] [3/16/2011 10:58:07 AM] Resurrection sequence started. [3/16/2011 10:58:07 AM] Establish communication with the phone...OK [3/16/2011 10:58:07 AM] Initializing internal hardware configuration...OK [3/16/2011 10:58:07 AM] Uploading resurrector data into memory...OK [3/16/2011 10:58:07 AM] Starting communication with resurrector...OK [3/16/2011 10:58:07 AM] [3/16/2011 10:58:07 AM] Detected an Initialized FLASH1 Chip ID: 0x00EC/0x2252 (8MB) [3/16/2011 10:58:07 AM] [3/16/2011 10:58:07 AM] Writting FLASH1 memory from 0x00000000 to 0x007FFFFF [3/16/2011 10:58:07 AM] ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK [3/16/2011 10:58:07 AM] ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK [3/16/2011 10:58:07 AM] ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK [3/16/2011 10:58:07 AM] ERROR: Stopped due to multiple communication errors. Terminating at 0x00000000 [3/16/2011 10:58:07 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:58:12 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:58:17 AM] Open serial port...OK [3/16/2011 10:58:17 AM] Connecting to the RIFF Box...OK [3/16/2011 10:58:17 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:58:17 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:58:17 AM] [3/16/2011 10:58:17 AM] Connecting to the dead body...OK [3/16/2011 10:58:17 AM] Detected dead body ID: 0x200B10E1 - IGNORED! [3/16/2011 10:58:17 AM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK [3/16/2011 10:58:17 AM] Adaptive Clocking RTCK Sampling is: [Sample at 2 MHz] [3/16/2011 10:58:17 AM] [3/16/2011 10:58:17 AM] Resurrection sequence started. [3/16/2011 10:58:17 AM] Establish communication with the phone...OK [3/16/2011 10:58:17 AM] Initializing internal hardware configuration...OK [3/16/2011 10:58:17 AM] Uploading resurrector data into memory...OK [3/16/2011 10:58:17 AM] Starting communication with resurrector...OK [3/16/2011 10:58:17 AM] [3/16/2011 10:58:17 AM] Detected an Initialized FLASH1 Chip ID: 0x00EC/0x2252 (8MB) [3/16/2011 10:58:17 AM] [3/16/2011 10:58:17 AM] Writting FLASH1 memory from 0x00000000 to 0x007FFFFF [3/16/2011 10:58:17 AM] ERROR: Timeout while waiting for DCC Loader response. Trying to recover... [3/16/2011 10:58:17 AM] ERROR: Forced to Terminate. Terminated at 0x00000000 [3/16/2011 10:58:17 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:58:20 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:58:20 AM] Open serial port...OK [3/16/2011 10:58:20 AM] Connecting to the RIFF Box...ERROR [3/16/2011 10:58:20 AM] ERROR: No response from the RIFF Box. [3/16/2011 10:58:20 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:58:21 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:58:21 AM] Open serial port...OK [3/16/2011 10:58:21 AM] Connecting to the RIFF Box...ERROR [3/16/2011 10:58:21 AM] ERROR: Wrong response from the RIFF Box. [3/16/2011 10:58:21 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:58:22 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:58:22 AM] Open serial port...OK [3/16/2011 10:58:22 AM] Connecting to the RIFF Box...OK [3/16/2011 10:58:22 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:58:22 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:58:22 AM] [3/16/2011 10:58:22 AM] Connecting to the dead body...OK [3/16/2011 10:58:22 AM] Detected dead body ID: 0x200B10E1 - IGNORED! [3/16/2011 10:58:22 AM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK [3/16/2011 10:58:22 AM] Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz] [3/16/2011 10:58:22 AM] [3/16/2011 10:58:22 AM] Resurrection sequence started. [3/16/2011 10:58:22 AM] Establish communication with the phone...OK [3/16/2011 10:58:22 AM] Initializing internal hardware configuration...OK [3/16/2011 10:58:22 AM] Uploading resurrector data into memory...OK [3/16/2011 10:58:22 AM] Starting communication with resurrector...FAILED [3/16/2011 10:58:22 AM] ERROR: No response from the RIFF Box. [3/16/2011 10:58:22 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:58:23 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:58:30 AM] Open serial port...OK [3/16/2011 10:58:30 AM] Connecting to the RIFF Box...OK [3/16/2011 10:58:30 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:58:30 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:58:30 AM] [3/16/2011 10:58:30 AM] Connecting to the dead body...OK [3/16/2011 10:58:30 AM] Detected dead body ID: 0x200B10E1 - IGNORED! [3/16/2011 10:58:30 AM] Set I/O Voltage reads as 2.58V, TCK Frequency is RTCK [3/16/2011 10:58:30 AM] Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz] [3/16/2011 10:58:30 AM] [3/16/2011 10:58:30 AM] Resurrection sequence started. [3/16/2011 10:58:30 AM] Establish communication with the phone...OK [3/16/2011 10:58:30 AM] Initializing internal hardware configuration...OK [3/16/2011 10:58:30 AM] Uploading resurrector data into memory...OK [3/16/2011 10:58:30 AM] Starting communication with resurrector...OK [3/16/2011 10:58:30 AM] [3/16/2011 10:58:30 AM] Detected an Initialized FLASH1 Chip ID: 0x00EC/0x2252 (8MB) [3/16/2011 10:58:30 AM] [3/16/2011 10:58:30 AM] Writting FLASH1 memory from 0x00000000 to 0x007FFFFF [3/16/2011 10:58:30 AM] ERROR: Timeout while waiting for DCC Loader response. Trying to recover... [3/16/2011 10:58:30 AM] ERROR: Forced to Terminate. Terminated at 0x00000000 [3/16/2011 10:58:30 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:58:41 AM] [START OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:58:48 AM] Open serial port...OK [3/16/2011 10:58:48 AM] Connecting to the RIFF Box...OK [3/16/2011 10:58:48 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:58:48 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:58:48 AM] [3/16/2011 10:58:48 AM] Connecting to the dead body...OK [3/16/2011 10:58:48 AM] Detected dead body ID: 0x200B10E1 - IGNORED! [3/16/2011 10:58:48 AM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK [3/16/2011 10:58:48 AM] Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz] [3/16/2011 10:58:48 AM] [3/16/2011 10:58:48 AM] Resurrection sequence started. [3/16/2011 10:58:48 AM] Establish communication with the phone...OK [3/16/2011 10:58:48 AM] Initializing internal hardware configuration...OK [3/16/2011 10:58:48 AM] Uploading resurrector data into memory...OK [3/16/2011 10:58:48 AM] Starting communication with resurrector...OK [3/16/2011 10:58:48 AM] [3/16/2011 10:58:48 AM] Detected an Initialized FLASH1 Chip ID: 0x00EC/0x2252 (8MB) [3/16/2011 10:58:48 AM] [3/16/2011 10:58:48 AM] Writting FLASH1 memory from 0x00000000 to 0x007FFFFF [3/16/2011 10:58:48 AM] ERROR: Timeout while waiting for DCC Loader response. Trying to recover... [3/16/2011 10:58:48 AM] ERROR: Forced to Terminate. Terminated at 0x00000000 [3/16/2011 10:58:48 AM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY] [3/16/2011 10:59:01 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:59:02 AM] Open serial port...OK [3/16/2011 10:59:02 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:02 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:02 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:02 AM] [3/16/2011 10:59:02 AM] Connecting to the dead body...OK [3/16/2011 10:59:02 AM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK [3/16/2011 10:59:02 AM] Model selected: ZTE - ZTE S100 [3/16/2011 10:59:02 AM] [3/16/2011 10:59:02 AM] Detected dead body ID: 0x200B10E1 [3/16/2011 10:59:02 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:59:02 AM] [START OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:59:03 AM] Open serial port...OK [3/16/2011 10:59:03 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:03 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:03 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:03 AM] [3/16/2011 10:59:03 AM] Connecting to the dead body...OK [3/16/2011 10:59:03 AM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK [3/16/2011 10:59:03 AM] Model selected: ZTE - ZTE S100 [3/16/2011 10:59:03 AM] [3/16/2011 10:59:03 AM] Detected dead body ID: 0x200B10E1 [3/16/2011 10:59:03 AM] [FINISH OPERATION_ID = GET_DEVICE_ID] [3/16/2011 10:59:05 AM] [START OPERATION_ID = EXECUTE_TARGET] [3/16/2011 10:59:05 AM] Open serial port...OK [3/16/2011 10:59:05 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:05 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:05 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:05 AM] [3/16/2011 10:59:05 AM] Target GO from PC = 0x00100000...FAILED [3/16/2011 10:59:05 AM] ERROR: Failed setting Core into Running state. Terminating. [3/16/2011 10:59:05 AM] [FINISH OPERATION_ID = EXECUTE_TARGET] [3/16/2011 10:59:05 AM] [START OPERATION_ID = EXECUTE_TARGET] [3/16/2011 10:59:06 AM] Open serial port...OK [3/16/2011 10:59:06 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:06 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:06 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:06 AM] [3/16/2011 10:59:06 AM] Target GO from PC = 0x00100000...FAILED [3/16/2011 10:59:06 AM] ERROR: Failed setting Core into Running state. Terminating. [3/16/2011 10:59:06 AM] [FINISH OPERATION_ID = EXECUTE_TARGET] [3/16/2011 10:59:13 AM] [START OPERATION_ID = DIRECT_WRITE_MEMORY] [3/16/2011 10:59:13 AM] Open serial port...OK [3/16/2011 10:59:13 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:13 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:13 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:13 AM] [3/16/2011 10:59:13 AM] Writting Target Memory...ERROR [3/16/2011 10:59:13 AM] ERROR: Wrong response from the RIFF Box. [3/16/2011 10:59:13 AM] [FINISH OPERATION_ID = DIRECT_WRITE_MEMORY] [3/16/2011 10:59:15 AM] [START OPERATION_ID = DIRECT_WRITE_MEMORY] [3/16/2011 10:59:15 AM] Open serial port...OK [3/16/2011 10:59:15 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:15 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:15 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:15 AM] [3/16/2011 10:59:15 AM] Writting Target Memory...ERROR [3/16/2011 10:59:15 AM] ERROR: Wrong response from the RIFF Box. [3/16/2011 10:59:15 AM] [FINISH OPERATION_ID = DIRECT_WRITE_MEMORY] [3/16/2011 10:59:16 AM] [START OPERATION_ID = DIRECT_WRITE_MEMORY] [3/16/2011 10:59:16 AM] Open serial port...OK [3/16/2011 10:59:16 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:16 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:16 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:16 AM] [3/16/2011 10:59:16 AM] Writting Target Memory...ERROR [3/16/2011 10:59:16 AM] ERROR: Wrong response from the RIFF Box. [3/16/2011 10:59:16 AM] [FINISH OPERATION_ID = DIRECT_WRITE_MEMORY] [3/16/2011 10:59:16 AM] [START OPERATION_ID = DIRECT_WRITE_MEMORY] [3/16/2011 10:59:17 AM] Open serial port...OK [3/16/2011 10:59:17 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:17 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:17 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:17 AM] [3/16/2011 10:59:17 AM] Writting Target Memory...ERROR [3/16/2011 10:59:17 AM] ERROR: Wrong response from the RIFF Box. [3/16/2011 10:59:17 AM] [FINISH OPERATION_ID = DIRECT_WRITE_MEMORY] [3/16/2011 10:59:17 AM] [START OPERATION_ID = DIRECT_WRITE_MEMORY] [3/16/2011 10:59:17 AM] Open serial port...OK [3/16/2011 10:59:17 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:17 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:17 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:17 AM] [3/16/2011 10:59:17 AM] Writting Target Memory...ERROR [3/16/2011 10:59:17 AM] ERROR: Wrong response from the RIFF Box. [3/16/2011 10:59:17 AM] [FINISH OPERATION_ID = DIRECT_WRITE_MEMORY] [3/16/2011 10:59:18 AM] [START OPERATION_ID = DIRECT_WRITE_MEMORY] [3/16/2011 10:59:18 AM] Open serial port...OK [3/16/2011 10:59:18 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:18 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:18 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:18 AM] [3/16/2011 10:59:18 AM] Writting Target Memory...ERROR [3/16/2011 10:59:18 AM] ERROR: Wrong response from the RIFF Box. [3/16/2011 10:59:18 AM] [FINISH OPERATION_ID = DIRECT_WRITE_MEMORY] [3/16/2011 10:59:18 AM] [START OPERATION_ID = DIRECT_WRITE_MEMORY] [3/16/2011 10:59:19 AM] Open serial port...OK [3/16/2011 10:59:19 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:19 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:19 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:19 AM] [3/16/2011 10:59:19 AM] Writting Target Memory...ERROR [3/16/2011 10:59:19 AM] ERROR: Wrong response from the RIFF Box. [3/16/2011 10:59:19 AM] [FINISH OPERATION_ID = DIRECT_WRITE_MEMORY] [3/16/2011 10:59:19 AM] [START OPERATION_ID = DIRECT_WRITE_MEMORY] [3/16/2011 10:59:19 AM] Open serial port...OK [3/16/2011 10:59:19 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:19 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:19 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:19 AM] [3/16/2011 10:59:19 AM] Writting Target Memory...ERROR [3/16/2011 10:59:19 AM] ERROR: Wrong response from the RIFF Box. [3/16/2011 10:59:19 AM] [FINISH OPERATION_ID = DIRECT_WRITE_MEMORY] [3/16/2011 10:59:21 AM] [START OPERATION_ID = DIRECT_READ_MEMORY] [3/16/2011 10:59:26 AM] Open serial port...OK [3/16/2011 10:59:26 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:26 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:26 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:26 AM] [3/16/2011 10:59:26 AM] Reading Target Memory...ERROR [3/16/2011 10:59:26 AM] ERROR: No response from the RIFF Box. [3/16/2011 10:59:26 AM] [FINISH OPERATION_ID = DIRECT_READ_MEMORY] [3/16/2011 10:59:27 AM] [START OPERATION_ID = DIRECT_READ_MEMORY] [3/16/2011 10:59:32 AM] Open serial port...OK [3/16/2011 10:59:32 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:32 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:32 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:32 AM] [3/16/2011 10:59:32 AM] Reading Target Memory...ERROR [3/16/2011 10:59:32 AM] ERROR: No response from the RIFF Box. [3/16/2011 10:59:32 AM] [FINISH OPERATION_ID = DIRECT_READ_MEMORY] [3/16/2011 10:59:33 AM] [START OPERATION_ID = EXECUTE_TARGET] [3/16/2011 10:59:33 AM] Open serial port...OK [3/16/2011 10:59:33 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:33 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:33 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:33 AM] [3/16/2011 10:59:33 AM] Target GO from PC = 0x00100000...FAILED [3/16/2011 10:59:33 AM] ERROR: Failed setting Core into Running state. Terminating. [3/16/2011 10:59:33 AM] [FINISH OPERATION_ID = EXECUTE_TARGET] [3/16/2011 10:59:37 AM] [START OPERATION_ID = HALT_TARGET] [3/16/2011 10:59:37 AM] Open serial port...OK [3/16/2011 10:59:37 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:37 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:37 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:37 AM] [3/16/2011 10:59:37 AM] Halting target...OK [3/16/2011 10:59:37 AM] STATUS: Target is halted. [3/16/2011 10:59:37 AM] [3/16/2011 10:59:37 AM] R0 = 0x00000009 R6 = 0x00000000 R12 = 0x00450460 [3/16/2011 10:59:37 AM] R1 = 0x0000002C R7 = 0x401E0000 R13 = 0x302F4A28 [3/16/2011 10:59:37 AM] R2 = 0x40000000 R8 = 0x00000000 R14 = 0x00000048 [3/16/2011 10:59:37 AM] R3 = 0x00000000 R9 = 0x00000000 R15 = 0x00321284 [3/16/2011 10:59:37 AM] R4 = 0x00021550 R10 = 0x00000000 CPSR = 0x000000F3 [3/16/2011 10:59:37 AM] R5 = 0x00000043 R11 = 0x00000000 [3/16/2011 10:59:37 AM] [FINISH OPERATION_ID = HALT_TARGET] [3/16/2011 10:59:39 AM] [START OPERATION_ID = HALT_TARGET] [3/16/2011 10:59:39 AM] Open serial port...OK [3/16/2011 10:59:39 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:39 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:39 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:39 AM] [3/16/2011 10:59:39 AM] Halting target...OK [3/16/2011 10:59:39 AM] STATUS: Target was already halted. [3/16/2011 10:59:39 AM] [3/16/2011 10:59:39 AM] R0 = 0x00000009 R6 = 0x00000000 R12 = 0x00450460 [3/16/2011 10:59:39 AM] R1 = 0x0000002C R7 = 0x401E0000 R13 = 0x302F4A28 [3/16/2011 10:59:39 AM] R2 = 0x40000000 R8 = 0x00000000 R14 = 0x00000048 [3/16/2011 10:59:39 AM] R3 = 0x00000000 R9 = 0x00000000 R15 = 0x00321284 [3/16/2011 10:59:39 AM] R4 = 0x00021550 R10 = 0x00000000 CPSR = 0x000000F3 [3/16/2011 10:59:39 AM] R5 = 0x00000043 R11 = 0x00000000 [3/16/2011 10:59:39 AM] [FINISH OPERATION_ID = HALT_TARGET] [3/16/2011 10:59:41 AM] [START OPERATION_ID = RESET_TARGET] [3/16/2011 10:59:42 AM] Open serial port...OK [3/16/2011 10:59:42 AM] Connecting to the RIFF Box...OK [3/16/2011 10:59:42 AM] Firmware Version: 1.20, JTAG Manager Version: 1.28 [3/16/2011 10:59:42 AM] Selected Resurrector: [ZTE S100] [3/16/2011 10:59:42 AM] [3/16/2011 10:59:42 AM] Resetting target...OK [3/16/2011 10:59:42 AM] STATUS: Target is halted. [3/16/2011 10:59:42 AM] [3/16/2011 10:59:42 AM] R0 = 0x8000074C R6 = 0x00000000 R12 = 0x00450460 [3/16/2011 10:59:42 AM] R1 = 0x00000007 R7 = 0x401E0000 R13 = 0x302F4A28 [3/16/2011 10:59:42 AM] R2 = 0x40000000 R8 = 0x00000000 R14 = 0x00000048 [3/16/2011 10:59:42 AM] R3 = 0x00000000 R9 = 0x00000000 R15 = 0x00000000 [3/16/2011 10:59:42 AM] R4 = 0x00021550 R10 = 0x00000000 CPSR = 0x000000D3 [3/16/2011 10:59:42 AM] R5 = 0x00000043 R11 = 0x00000000 [3/16/2011 10:59:42 AM] [FINISH OPERATION_ID = RESET_TARGET] [3/16/2011 10:59:43 AM] [START OPERATION_ID = READ_ICE_REGS] [3/16/2011 10:59:43 AM] Ope |
Bookmarks |
| |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
lots of service manuals Nokia, Siemens Sony Samsung etc. | -=KnOeFz=- | GSM Mobile Links | 4 | 11-16-2011 08:42 |
cdma software | dgtulga | GSM Mobile Links | 1 | 01-27-2002 17:36 |
CDMA hacking site | dgtulga | GSM Mobile Links | 1 | 12-04-2001 23:03 |
cdma--amps forum or sw site.... | F C | GSM Mobile Links | 0 | 12-04-2001 17:45 |
Anyone have a link to CDMA unlocking forum | SKAS_2002 | GSM Mobile Links | 1 | 10-29-2001 07:34 |
|