Samsung E120K repair how to? - GSM-Forum

janda · 12-28-2012, 10:19

Samsung E120K bootloader repaired using E120S dll, phone enters bootloader mode using samsung jig, but is impossible to flash back to original with E120K firmware.

Odin 1.85 error:

Code:

<ID:0/016> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_E120K.UF29.1112_CL805677_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<ID:0/016> Initialzation..
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> boot.img
<ID:0/016> NAND Write Start!! 
<ID:0/016> recovery.img
<ID:0/016> system.img.ext4
<ID:0/016> amss.bin
<ID:0/016> 
<ID:0/016> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Riff recovery log:

Code:

[27. 12. 2012 17:45:37] ------------------------------- JTAG Manager Session Opened -------------------------------
[27. 12. 2012 17:45:37] JTAG Manger Version: 1.48
[27. 12. 2012 17:45:37] -------------------------------------------------------------------------------------------

 
[27. 12. 2012 17:47:26] [START OPERATION_ID = RESURRECT]
[27. 12. 2012 17:47:27] Open serial port...OK
[27. 12. 2012 17:47:27] Connecting to the RIFF Box...OK
[27. 12. 2012 17:47:27] Firmware Version: 1.34, JTAG Manager Version: 1.48
[27. 12. 2012 17:47:27] Selected Resurrector: [Samsung E120S V1.0.4473.8019]
[27. 12. 2012 17:47:27] 
[27. 12. 2012 17:47:27] Connecting to the dead body...OK
[27. 12. 2012 17:47:27] Detected dead body ID: 0x106A10E1 - WRONG!!!
[27. 12. 2012 17:47:27] ERROR: Current ID does not belong to the Samsung E120S family.
[27. 12. 2012 17:47:27] [FINISH OPERATION_ID = RESURRECT]

[27. 12. 2012 17:49:09] [START OPERATION_ID = RESURRECT]
[27. 12. 2012 17:49:21] Open serial port...ERROR
[27. 12. 2012 17:49:21] ERROR: Couldn't Detect the RIFF Box.
[27. 12. 2012 17:49:21] [FINISH OPERATION_ID = RESURRECT]

[27. 12. 2012 17:49:37] [START OPERATION_ID = RESURRECT]
[27. 12. 2012 17:50:20] Open serial port...OK
[27. 12. 2012 17:50:20] Connecting to the RIFF Box...OK
[27. 12. 2012 17:50:20] Firmware Version: 1.34, JTAG Manager Version: 1.48
[27. 12. 2012 17:50:20] Selected Resurrector: [Samsung E120S V1.0.4473.8019]
[27. 12. 2012 17:50:20] 
[27. 12. 2012 17:50:20] Connecting to the dead body...OK
[27. 12. 2012 17:50:20] Detected dead body ID: 0x106A10E1 - IGNORED!
[27. 12. 2012 17:50:20] Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
[27. 12. 2012 17:50:20] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[27. 12. 2012 17:50:20] 
[27. 12. 2012 17:50:20] Resurrection sequence started.
[27. 12. 2012 17:50:20] Establish communication with the phone...OK
[27. 12. 2012 17:50:20] Initializing internal hardware configuration...OK
[27. 12. 2012 17:50:20] Uploading resurrector data into memory...OK
[27. 12. 2012 17:50:20] Starting communication with resurrector...OK
[27. 12. 2012 17:50:20] 
[27. 12. 2012 17:50:20] Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0000 (KTS00M, 0x0003AB400000 Bytes = 14.68 GB)
[27. 12. 2012 17:50:20] Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0000 (KTS00M, 0x000000200000 Bytes = 2.00 MB)
[27. 12. 2012 17:50:20] 
[27. 12. 2012 17:50:20] Flashing the dead body...OK
[27. 12. 2012 17:50:20] Resurrection complete!
[27. 12. 2012 17:50:20] [FINISH OPERATION_ID = RESURRECT]

[27. 12. 2012 17:50:24] ------------------------------- JTAG Manager Session Closed -------------------------------

Dear Mr Legija plese check also this tread: http://forum.gsmhosting.com/vbb/f352...tware-1584897/

**legija** · 12-28-2012, 10:39

You should write cwm recovery, and upload radio zip package trough recovery.

janda · 12-28-2012, 10:52

Thanx, I have succesfully flashed: cwm-recovery-6.0.1.5-SHV-E120K.tar
but phone wont enter recovery mode by pressing: [Volume up] and [Volume Down] and [Power]

Only Samsung logo shows for 2 seconds, nothing more

Or i have to flash recover for E120S ???

janda · 01-02-2013, 13:24

Still no success, what i have to do next? Phone doesnt enter recovery mode by pressing VOLUME UP + DOWN + POWER.

Downloads mode works as E120S, but cant flash official firmware E120K!!!

janda · 01-07-2013, 13:00

not possible to repair?

..::Thanh_gsm::.. · 01-07-2013, 20:34

Maybe you still need good backup from working phone. E120K can't use E120S rom.

12-28-2012, 10:39	#2 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	You should write cwm recovery, and upload radio zip package trough recovery.

12-28-2012, 10:52	#3 (permalink)
janda Freak Poster Join Date: May 2006 Location: Slovakia Posts: 334 Member: 272319 Status: Offline Thanks Meter: 99	Thanx, I have succesfully flashed: cwm-recovery-6.0.1.5-SHV-E120K.tar but phone wont enter recovery mode by pressing: [Volume up] and [Volume Down] and [Power] Only Samsung logo shows for 2 seconds, nothing more Or i have to flash recover for E120S ???

01-02-2013, 13:24	#4 (permalink)
janda Freak Poster Join Date: May 2006 Location: Slovakia Posts: 334 Member: 272319 Status: Offline Thanks Meter: 99	Still no success, what i have to do next? Phone doesnt enter recovery mode by pressing VOLUME UP + DOWN + POWER. Downloads mode works as E120S, but cant flash official firmware E120K!!!

01-07-2013, 13:00	#5 (permalink)
janda Freak Poster Join Date: May 2006 Location: Slovakia Posts: 334 Member: 272319 Status: Offline Thanks Meter: 99	not possible to repair?

01-07-2013, 20:34	#6 (permalink)
..::Thanh_gsm::.. No Life Poster Join Date: Dec 2005 Location: Ha Noi - Viet Nam Age: 18 Posts: 1,289 Member: 207400 Status: Offline Sonork: 100.1582556 Thanks Meter: 262	Maybe you still need good backup from working phone. E120K can't use E120S rom.