Samsung E160s deadboot - GSM-Forum

kidgz · 07-12-2014, 09:51

hi is it possible to jtag by riff
supported?

thankyou

kidgz · 07-12-2014, 10:47

Quote:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung E160K V1.0.4535.7001]

Connecting to the dead body...OK
Detected dead body ID: 0x106A10E1 - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0000 (KZS00M, 0x000747C00000 Bytes = 29.12 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0000 (KZS00M, 0x000000200000 Bytes = 2.00 MB)

Flashing the dead body...
ERROR: DCC Loader has reported Error Code = 0x36 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x36 (0x000000). Trying to recover...OK
ERROR: Stopped due to multiple communication errors. Terminating at 0x000000000000

Logs selecting E160k
phone board is E160s

now trying erasing phone im at 30%

kidgz · 07-12-2014, 11:08

Erase complete phone still alive

flashing complete phone still in odin mode

EMMC?

BABAK NURI · 07-12-2014, 18:57

Hi
Erase can't work on any device based on eMMC
--
For Resurrect e160s You have 2 way :
First,Resurrect Phone with selected E160k.dll Then Inject and Write some needed partition by eMMC Plugin from Dump File
Or
Totally Write Dump File By DCC Read/Write Page

kidgz · 07-13-2014, 10:25

ok sir Babak
ill try what you said

alrsbs · 03-13-2015, 21:00

this problem i going with 2 years.BABAK NURI sir tell me why not not adding this model e160s.Why not added E160S.dll to support, i have many phone dead boot and im repair it with E160k,
result flashing with E160s camera not working and bla bla bla..need help please RIFFBOX Team added E160S dll on support
i have repair with e160.dll and after no imei. Have Imei/BB Problem Because Did Repair E160s Phone With E160K.dll
Of Course Can't Flash "S" Firmware Because Have "K" Data In Rom2 and Param Partition.

supporter know that and they sleep???? why you trying to tell buy gpg ort for repair only one phone?please add this again e160s

07-12-2014, 09:51	#1 (permalink)
kidgz Freak Poster Join Date: Jul 2007 Location: Circuitcorner Posts: 463 Member: 551599 Status: Offline Thanks Meter: 139	Samsung E160s deadboot hi is it possible to jtag by riff supported? thankyou

03-13-2015, 21:00	#6 (permalink)
alrsbs No Life Poster Join Date: Oct 2011 Location: srilanka Age: 32 Posts: 553 Member: 1674096 Status: Offline Thanks Meter: 49	trying to tell buy gpg this problem i going with 2 years.BABAK NURI sir tell me why not not adding this model e160s.Why not added E160S.dll to support, i have many phone dead boot and im repair it with E160k, result flashing with E160s camera not working and bla bla bla..need help please RIFFBOX Team added E160S dll on support i have repair with e160.dll and after no imei. Have Imei/BB Problem Because Did Repair E160s Phone With E160K.dll Of Course Can't Flash "S" Firmware Because Have "K" Data In Rom2 and Param Partition. supporter know that and they sleep???? why you trying to tell buy gpg ort for repair only one phone?please add this again e160s

07-12-2014, 11:08	#3 (permalink)
kidgz Freak Poster Join Date: Jul 2007 Location: Circuitcorner Posts: 463 Member: 551599 Status: Offline Thanks Meter: 139	Erase complete phone still alive flashing complete phone still in odin mode EMMC?

07-12-2014, 18:57	#4 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 43 Posts: 7,259 Member: 131131 Status: Offline Sonork: 100.1606847 Thanks Meter: 4,475	Hi Erase can't work on any device based on eMMC -- For Resurrect e160s You have 2 way : First,Resurrect Phone with selected E160k.dll Then Inject and Write some needed partition by eMMC Plugin from Dump File Or Totally Write Dump File By DCC Read/Write Page

07-13-2014, 10:25	#5 (permalink)
kidgz Freak Poster Join Date: Jul 2007 Location: Circuitcorner Posts: 463 Member: 551599 Status: Offline Thanks Meter: 139	ok sir Babak ill try what you said