Samsung Galaxy Grand Quattro/Win Dous GT-I8552 Dead!

[slim.legend]

Hello,
i received an i8552 dead. i tried resurrecting it but i wasn't successful.. after resurrection phone still is recognized as "Zeus Flash Device". there is four areas to be reflashed and whenever i check "Andoird Boot and Recovery Area" it wont show the resurrection complete message!! but for other three it shows which are "Boot area, FAT area, EFS Area". Any Idea? Supporters Please Help.
here is the log:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [Samsung I8552 V1.0.4969.38432]

Connecting to the dead body...OK
Detected dead body ID: 0x008E00E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (000000, 0x0001FFF80000 Bytes = 8.00 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (000000, 0x000000080000 Bytes = 0.50 MB)

No Resurrection Data is available for the eMMC Chip with Capacity = 8.00GB
WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 3,64GB

Flashing the dead body...

[slim.legend]

And Whats up with That warning?? there is no I8552 with eMMC chip with capacity of 3.64 GB!!
WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 3,64GB

[BABAK NURI]

Hi
You have bad eMMC or replaced wrong eMMC Because I see in your log,Your eMMC not have Model ID:

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (000000, 0x0001FFF80000 Bytes = 8.00 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (000000, 0x000000080000 Bytes = 0.50 MB)

[luckysisi]

Any1 heated the emmc . Emmc has shottage under it . Remove and reinstall emmc

Sent from my GT-I9505 using Tapatalk

[slim.legend]

Originally Posted by BABAK NURI

Hi
You have bad eMMC or replaced wrong eMMC Because I see in your log,Your eMMC not have Model ID:

Thank you so much Mr. Babak Nuri. I haven't replaced the emmc yet. Can you Please tell me I8552's eMMC is similar to what other models? because i have no new emmc with this ID: SAMSUNG 346 - KMK70000VM 8309 - CJJ3559U
please tell me what emmc models i can replace with?
Thanks in Advance

[slim.legend]

Originally Posted by luckysisi

Any1 heated the emmc . Emmc has shottage under it . Remove and reinstall emmc

Sent from my GT-I9505 using Tapatalk

No one has ever heated the emmc. i opened the phone for the first time but i will try what you said anyway before changing emmc. thanks