Samsung galaxy i9100 resurrection problam - GSM-Forum

CELL SOLUTIONS · 11-06-2012, 17:39

hi guys i have a complete dead i9100 whille updating on odin

and now i make pinouts correctly and trying to resurec with riff

butt now i have this kind of error even i refresh 3 times pinouts

and the error is [Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.45
Selected Resurrector: [Samsung i9100 V1.0.4582.4854]

Connecting to the dead body...
ERROR: Set I/O Voltage to 2.80V failed. Real reading is 4.00V]

if any one can has experince about this plz reply as soon as

coz my custmor not agreed to wait so long

thanks .....

**legija** · 11-06-2012, 18:22

Hi,
Either is something very wrong with Your connection, or phone is short circuited.

Vcc voltage is set by RIFF Box internal circuit, and measured upon connection startup.
From Your log i can see that Vcc voltage (I/O logic) is 4V, which is abnormal.

CELL SOLUTIONS · 11-07-2012, 11:26

yes butt i try last 3-4 fones i have same error on htc and Galaxy before i do many fones .....

**legija** · 11-07-2012, 11:55

If You have this problem even without phone connected, it means that Vcc generator circuitry is burned.
Contact ren77 for repair arrangement.

CELL SOLUTIONS · 11-08-2012, 12:59

yes problam solved now thanks A lott for ur quick response......

br CELLSOLUTIONS

11-06-2012, 17:39	#1 (permalink)
CELL SOLUTIONS Freak Poster Join Date: Apr 2005 Location: Greec...Athens Age: 41 Posts: 193 Member: 133144 Status: Offline Thanks Meter: 27	Samsung galaxy i9100 resurrection problam hi guys i have a complete dead i9100 whille updating on odin and now i make pinouts correctly and trying to resurec with riff butt now i have this kind of error even i refresh 3 times pinouts and the error is [Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.34, JTAG Manager Version: 1.45 Selected Resurrector: [Samsung i9100 V1.0.4582.4854] Connecting to the dead body... ERROR: Set I/O Voltage to 2.80V failed. Real reading is 4.00V] if any one can has experince about this plz reply as soon as coz my custmor not agreed to wait so long thanks .....

11-06-2012, 18:22	#2 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	Hi, Either is something very wrong with Your connection, or phone is short circuited. Vcc voltage is set by RIFF Box internal circuit, and measured upon connection startup. From Your log i can see that Vcc voltage (I/O logic) is 4V, which is abnormal.

11-07-2012, 11:26	#3 (permalink)
CELL SOLUTIONS Freak Poster Join Date: Apr 2005 Location: Greec...Athens Age: 41 Posts: 193 Member: 133144 Status: Offline Thanks Meter: 27	yes butt i try last 3-4 fones i have same error on htc and Galaxy before i do many fones .....

11-07-2012, 11:55	#4 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	If You have this problem even without phone connected, it means that Vcc generator circuitry is burned. Contact ren77 for repair arrangement.

11-08-2012, 12:59	#5 (permalink)
CELL SOLUTIONS Freak Poster Join Date: Apr 2005 Location: Greec...Athens Age: 41 Posts: 193 Member: 133144 Status: Offline Thanks Meter: 27	yes problam solved now thanks A lott for ur quick response...... br CELLSOLUTIONS