Samsung GT-S7562 dous Samsung logo only done by Riff Box - GSM-Forum

fertxter · 11-23-2013, 08:20

Samsung GT-S7562 dous Samsung logo only done by Riff Box

Status of unit Samsung logo or Restating only

Action

Flashing on odin and Z3x with one file flashing or full file flashing no lock

Tools

Riff box
Dump file

Logs

Code:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [Samsung S7562 V1.0.4816.57076]

Connecting to the dead body...OK
Detected dead body ID: 0x106230E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x20010000000000000000000020000000

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (A00SJJ, 0x0000E9000000 Bytes = 3.64 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (A00SJJ, 0x000000100000 Bytes = 1.00 MB)

Writting FLASH1 memory from 0x000000000000 to 0x00001FFFFFFF
Completed in 01:58:09.875 (Average Transfer Rate: 73.95 kB/s)

n2roy · 12-22-2014, 17:45

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung S7562 V1.0.4816.57076]

Connecting to the dead body...OK
Detected dead body ID: 0x106230E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x20010000000000000000000020000000

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (A00SJJ, 0x0000E9000000 Bytes = 3.64 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (A00SJJ, 0x000000100000 Bytes = 1.00 MB)

Writting FLASH1 memory from 0x000000000000 to 0x00001FFFFFFF

n2roy · 12-27-2014, 21:48

problem solved. first erase full flash. then resurrection it. last flash it with original flash tool.

If all fails then change on/off switch.

abishekkumar · 02-18-2016, 10:17

Samsung dead boot repair 100% done

kccshafqat · 01-29-2017, 07:42

Please Sir share s7562 riff jtag pinout detail.

12-22-2014, 17:45	#2 (permalink)
n2roy Freak Poster Join Date: Dec 2009 Location: Raiganj Age: 37 Posts: 433 Member: 1175794 Status: Offline Thanks Meter: 186	Im doing same thing , hope I can recover my phone.. Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.56 Selected Resurrector: [Samsung S7562 V1.0.4816.57076] Connecting to the dead body...OK Detected dead body ID: 0x106230E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Settings Code: 0x20010000000000000000000020000000 Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (A00SJJ, 0x0000E9000000 Bytes = 3.64 GB) Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (A00SJJ, 0x000000100000 Bytes = 1.00 MB) Writting FLASH1 memory from 0x000000000000 to 0x00001FFFFFFF

12-27-2014, 21:48	#3 (permalink)
n2roy Freak Poster Join Date: Dec 2009 Location: Raiganj Age: 37 Posts: 433 Member: 1175794 Status: Offline Thanks Meter: 186	problem solved. first erase full flash. then resurrection it. last flash it with original flash tool. If all fails then change on/off switch.

02-18-2016, 10:17	#4 (permalink)
abishekkumar No Life Poster Join Date: May 2012 Location: Sherghati (gaya) Bihar Age: 31 Posts: 814 Member: 1761355 Status: Offline Sonork: 0818211 Thanks Meter: 105	Samsung dead boot repair 100% done

01-29-2017, 07:42	#5 (permalink)
kccshafqat Junior Member Join Date: Dec 2015 Posts: 8 Member: 2508646 Status: Offline Thanks Meter: 1	Please Sir share s7562 riff jtag pinout detail.