Samsung i9000 - some advice needed - GSM-Forum

makac999 · 03-30-2013, 23:39

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung I9000 V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.79V, TCK Frequency is 1 MHz

Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR(0x49): Communication is not established. Terminating.

Tried on all RTCK freq.Is that I/O voltage correct (2.79V) ???
Processor is getting HOT after 30sec. connected on batt and USB cable - is that OK ?

Thanx for help
Best Regards

Faheem Anjum · 03-31-2013, 09:19

percessor is getting hot check phone hardware , be sure all wires is connected well ,

03-30-2013, 23:39	#1 (permalink)
makac999 Freak Poster Join Date: Mar 2011 Location: Serbia Posts: 394 Member: 1541473 Status: Offline Thanks Meter: 41	Samsung i9000 - some advice needed Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.34, JTAG Manager Version: 1.48 Selected Resurrector: [Samsung I9000 V1.00] Connecting to the dead body...OK Detected dead body ID: 0x1BA00477 - CORRECT! Set I/O Voltage reads as 2.79V, TCK Frequency is 1 MHz Resurrection sequence started. Establish communication with the phone...FAILED ERROR(0x49): Communication is not established. Terminating. Tried on all RTCK freq.Is that I/O voltage correct (2.79V) ??? Processor is getting HOT after 30sec. connected on batt and USB cable - is that OK ? Thanx for help Best Regards

03-31-2013, 09:19	#2 (permalink)
Faheem Anjum No Life Poster Join Date: Nov 2006 Location: (United States Of Islam) Age: 37 Posts: 24,983 Member: 399832 Status: Offline Sonork: Faheem Anjum Thanks Meter: 24,308	percessor is getting hot check phone hardware , be sure all wires is connected well ,