GSM-Forum - Samsung i9100/n70000 Programming Error at 0x000000000000 Solution!

Page 1 of 7

Show 50 post(s) from this thread on one page

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- RIFFBOX (https://forum.gsmhosting.com/vbb/f634/)

- - Samsung i9100/n70000 Programming Error at 0x000000000000 Solution! (https://forum.gsmhosting.com/vbb/f634/samsung-i9100-n70000-programming-error-0x000000000000-solution-1508808/)

legija

07-20-2012 11:55

Samsung i9100/n70000 Programming Error at 0x000000000000 Solution!

1 Attachment(s)

Update:

This is obsolete now, with latest DLL-s for listed models.

All errors are handled automatically in DCC loader with latest DLL-s.

In case that You receive this errors in resurrection log, You have to replace eMMC chip, or pay someone who can do it for You.

Quote:

Flashing the dead body...
WARNING: Programming Error (0x25) at 0x0000018D8000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000018DC000 is handled as Cut Excess.

_________________________________________________

/////
/////

If this procedure is too complicated for You, there is nice agriculture plan supported by FAO: Food and Agriculture Organization of the United Nations, for a world without hunger

mpfa	07-20-2012 12:23

All the I9100 and N7000 I have received with this problem, fail immediately at the resurrection start (1%-5%), they never achieved the 100% as you mention in the thread...

Would this solution enable to flash a ROM from ODIN? I ask this because there are situations where the resurrection works but ODIN flash hangs in some part of the process because encounters bad blocks (?) during flash...

Regards

Marco

..::Thanh_gsm::..

07-20-2012 17:51

It's great new. So much phone die this way, can't read user area while boot1, boot2 still can read.
Have phone will try this.

iwalino

07-20-2012 23:08

Can I repaire boot on the i9100t this way?

..::Thanh_gsm::..

07-21-2012 21:26

Quote:

Originally Posted by iwalino (Post 8606050)

Can I repaire boot on the i9100t this way?

Sorry wrong misstake with I9100P. Pls del my post.

tdx3000

07-22-2012 04:02

Mr. Legija

what about this error

Quote:

Flashing the dead body...
WARNING: Programming Error (0x25) at 0x000000000000 is handled as Cut Excess.
ERROR: DCC Loader has reported Error Code = 0x3E (0x007FFF <> 0x014000)

maxco23

07-23-2012 07:31

hi riff team do you have any solution for i9003 with this problem ????
i want boot.bin from i9003

mpfa	07-23-2012 12:24

From what I know, if you get this error when repairing I9003, it means that the EMMC CHIP is damaged and the only solution is substitution of the CHIP...

The problems with the Note and I9100 are related with the EMMC BUG that makes the EMMC CHIP corrupt, but hardware is still good...

Do anyone has already repaired a Galaxy Note or Galaxy S2 with this solution?

Quote:

Originally Posted by maxco23 (Post 8611346)

hi riff team do you have any solution for i9003 with this problem ????
i want boot.bin from i9003

mpfa	07-23-2012 12:26

This is the same error that Mr. Legija exemplifies in first post... the only diference is the memory address that the JTAG software reports, but is the same problem...

Quote:

Originally Posted by tdx3000 (Post 8608840)

Mr. Legija

what about this error

easa	07-23-2012 12:40

Does not work for N7000. Hardware is OK, I can perform full erase eMMC, but I can't read and write it... App is not in DL mode...

maxco23

07-23-2012 16:39

hi i want to know in i9003 which ic is emmc ????

Download i9003 rar

tdx3000

07-23-2012 17:49

Quote:

Originally Posted by mpfa (Post 8612189)

This is the same error that Mr. Legija exemplifies in first post... the only diference is the memory address that the JTAG software reports, but is the same problem...

Immediately after i press "Ressurect" it giving me the error, it not even flash anything at all

mpfa	07-24-2012 12:40

Yes, it also happened the same to me when I tried to repair the Galaxy Notes and the Galaxy S2 phones with EMMC BUG problem...

Quote:

Originally Posted by tdx3000 (Post 8613023)

Immediately after i press "Ressurect" it giving me the error, it not even flash anything at all

minkoi

07-24-2012 19:15

Quote:

Originally Posted by legija (Post 8604657)

[SIZE=3]Hi,
Due to bug in eMMC controller firmware, many Exynos based Samsung phones fail on usual resurrection. Error which which causes this is that eMMC controller fails to exit programming state after writing one block. To continue programming, complete HW reset is required, thus rendering standard repair method useless.

If this procedure is too complicated for You, there is nice agriculture plan supported by FAO: Food and Agriculture Organization of the United Nations, for a world without hunger

thanks mr Legija i repair my i9100.:)

BR

siemensjunior

07-25-2012 13:08

I9100 ressurection

Quote:

Immediately after i press "Ressurect" it giving me the error, it not even flash anything at all

I have the same problem! Ressurection reaches 1% and say this error:

Quote:

Flashing the dead body...
WARNING: Programming Error (0x25) at 0x000000000000 is handled as Cut Excess.
ERROR: DCC Loader has reported Error Code = 0x3E (0x007FFF <> 0x010000)

I try change speed,but didnt help.
And boot.bin dont help me

All times are GMT +1. The time now is 23:24.

Page 1 of 7

Last »

Show 50 post(s) from this thread on one page

Page generated in 0.22777 seconds with 7 queries

SEO by vBSEO