Samsung i9100/n70000 Programming Error at 0x000000000000 Solution! - GSM-Forum

**legija** · 07-20-2012, 11:55

Update:

This is obsolete now, with latest DLL-s for listed models.

All errors are handled automatically in DCC loader with latest DLL-s.

In case that You receive this errors in resurrection log, You have to replace eMMC chip, or pay someone who can do it for You.

Quote:

Flashing the dead body...
WARNING: Programming Error (0x25) at 0x0000018D8000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000018DC000 is handled as Cut Excess.

_________________________________________________

/////
/////

If this procedure is too complicated for You, there is nice agriculture plan supported by FAO: Food and Agriculture Organization of the United Nations, for a world without hunger

mpfa · 07-20-2012, 12:23

All the I9100 and N7000 I have received with this problem, fail immediately at the resurrection start (1%-5%), they never achieved the 100% as you mention in the thread...

Would this solution enable to flash a ROM from ODIN? I ask this because there are situations where the resurrection works but ODIN flash hangs in some part of the process because encounters bad blocks (?) during flash...

Regards

Marco

..::Thanh_gsm::.. · 07-20-2012, 17:51

It's great new. So much phone die this way, can't read user area while boot1, boot2 still can read.
Have phone will try this.

iwalino · 07-20-2012, 23:08

Can I repaire boot on the i9100t this way?

..::Thanh_gsm::.. · 07-21-2012, 21:26

Quote:

Originally Posted by iwalino

Can I repaire boot on the i9100t this way?

Sorry wrong misstake with I9100P. Pls del my post.

tdx3000 · 07-22-2012, 04:02

Mr. Legija

what about this error

Quote:

Flashing the dead body...
WARNING: Programming Error (0x25) at 0x000000000000 is handled as Cut Excess.
ERROR: DCC Loader has reported Error Code = 0x3E (0x007FFF <> 0x014000)

maxco23 · 07-23-2012, 07:31

hi riff team do you have any solution for i9003 with this problem ????
i want boot.bin from i9003

mpfa · 07-23-2012, 12:24

From what I know, if you get this error when repairing I9003, it means that the EMMC CHIP is damaged and the only solution is substitution of the CHIP...

The problems with the Note and I9100 are related with the EMMC BUG that makes the EMMC CHIP corrupt, but hardware is still good...

Do anyone has already repaired a Galaxy Note or Galaxy S2 with this solution?

Quote:

Originally Posted by maxco23

hi riff team do you have any solution for i9003 with this problem ????
i want boot.bin from i9003

mpfa · 07-23-2012, 12:26

This is the same error that Mr. Legija exemplifies in first post... the only diference is the memory address that the JTAG software reports, but is the same problem...

Quote:

Originally Posted by tdx3000

Mr. Legija

what about this error

easa · 07-23-2012, 12:40

Does not work for N7000. Hardware is OK, I can perform full erase eMMC, but I can't read and write it... App is not in DL mode...

maxco23 · 07-23-2012, 16:39

hi i want to know in i9003 which ic is emmc ????

Download i9003 rar

tdx3000 · 07-23-2012, 17:49

Quote:

Originally Posted by mpfa

This is the same error that Mr. Legija exemplifies in first post... the only diference is the memory address that the JTAG software reports, but is the same problem...

Immediately after i press "Ressurect" it giving me the error, it not even flash anything at all

mpfa · 07-24-2012, 12:40

Yes, it also happened the same to me when I tried to repair the Galaxy Notes and the Galaxy S2 phones with EMMC BUG problem...

Quote:

Originally Posted by tdx3000

Immediately after i press "Ressurect" it giving me the error, it not even flash anything at all

minkoi · 07-24-2012, 19:15

Quote:

Originally Posted by legija

[SIZE=3]Hi,
Due to bug in eMMC controller firmware, many Exynos based Samsung phones fail on usual resurrection. Error which which causes this is that eMMC controller fails to exit programming state after writing one block. To continue programming, complete HW reset is required, thus rendering standard repair method useless.

If this procedure is too complicated for You, there is nice agriculture plan supported by FAO: Food and Agriculture Organization of the United Nations, for a world without hunger

thanks mr Legija i repair my i9100.

BR

siemensjunior · 07-25-2012, 13:08

I9100 ressurection

Quote:

Immediately after i press "Ressurect" it giving me the error, it not even flash anything at all

I have the same problem! Ressurection reaches 1% and say this error:

Quote:

Flashing the dead body...
WARNING: Programming Error (0x25) at 0x000000000000 is handled as Cut Excess.
ERROR: DCC Loader has reported Error Code = 0x3E (0x007FFF <> 0x010000)

I try change speed,but didnt help.
And boot.bin dont help me

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anybody know solution	Robi	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	12-10-2014 12:35
where to find a working program all they have some errors ??	fondas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	12-12-2012 13:26
Solution for GSM phones!?!?!?!?	todosije	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	12-16-2010 05:52
!!!!!!TO ALL NOKIA 51XX/61XX SP LOCKS 1,2,3,4 SOLUTION latest news!!!!!	spterminator	Main Sales Section	2	08-13-1999 05:55
Upload / Download eeprom program for 51xx/61xx	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	07-07-1999 14:03

07-20-2012, 12:23	#2 (permalink)
mpfa Insane Poster Join Date: Feb 2012 Location: Portugal, Funchal Posts: 88 Member: 1720469 Status: Offline Thanks Meter: 12	All the I9100 and N7000 I have received with this problem, fail immediately at the resurrection start (1%-5%), they never achieved the 100% as you mention in the thread... Would this solution enable to flash a ROM from ODIN? I ask this because there are situations where the resurrection works but ODIN flash hangs in some part of the process because encounters bad blocks (?) during flash... Regards Marco

07-20-2012, 17:51	#3 (permalink)
..::Thanh_gsm::.. No Life Poster Join Date: Dec 2005 Location: Ha Noi - Viet Nam Age: 18 Posts: 1,289 Member: 207400 Status: Offline Sonork: 100.1582556 Thanks Meter: 262	It's great new. So much phone die this way, can't read user area while boot1, boot2 still can read. Have phone will try this.

07-20-2012, 23:08	#4 (permalink)
iwalino Freak Poster Join Date: May 2005 Location: Kragujevac, Serbia Age: 50 Posts: 153 Member: 144064 Status: Offline Thanks Meter: 11	Can I repaire boot on the i9100t this way?

07-23-2012, 07:31	#7 (permalink)
maxco23 Insane Poster Join Date: Nov 2009 Location: iran .. sari Posts: 79 Member: 1168670 Status: Offline Thanks Meter: 20	hi riff team do you have any solution for i9003 with this problem ???? i want boot.bin from i9003

07-23-2012, 12:40	#10 (permalink)
easa Junior Member Join Date: Jul 2011 Posts: 10 Member: 1617728 Status: Offline Thanks Meter: 0	Does not work for N7000. Hardware is OK, I can perform full erase eMMC, but I can't read and write it... App is not in DL mode...

07-23-2012, 16:39	#11 (permalink)
maxco23 Insane Poster Join Date: Nov 2009 Location: iran .. sari Posts: 79 Member: 1168670 Status: Offline Thanks Meter: 20	hi i want to know in i9003 which ic is emmc ???? Download i9003 rar