samsung i9103 help - GSM-Forum

sunnet · 04-16-2013, 14:50

unable to boot repaire i9103

see this error
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung I9103 V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x4F1F0F0F - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR(0x42): Communication is not established. Terminating.

analize jtag chain report
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung I9103 V1.00]

Connecting to the target...OK
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK

Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x4BA00477, IR Length = 0x04 bits
Device on TAP #1: ID = 0x4F1F0F0F, IR Length = 0x04 bits
Total IR length: 0x0008 bits

Analizing IDCODE(s) of the JTAG scan chain:
1. 0x4BA00477: Samsung S5PV300
2. 0x4BA00477: NovaThor U8500
3. 0x4BA00477: Generic CORTEX-A9

please help

sunnet · 04-17-2013, 06:32

i am waiting where is product supporter?

**legija** · 04-17-2013, 10:59

RIFF JTAG Box FAQ - ERROR(0x42): Communication is not established. Terminating.

04-16-2013, 14:50	#1 (permalink)
sunnet Registered User Join Date: Aug 2007 Location: manglore Posts: 347 Member: 576990 Status: Offline Thanks Meter: 11	samsung i9103 help unable to boot repaire i9103 see this error Connecting to the RIFF Box...OK Firmware Version: 1.34, JTAG Manager Version: 1.48 Selected Resurrector: [Samsung I9103 V1.00] Connecting to the dead body...OK Detected dead body ID: 0x4F1F0F0F - CORRECT! Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...FAILED ERROR(0x42): Communication is not established. Terminating. analize jtag chain report Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.34, JTAG Manager Version: 1.48 Selected Resurrector: [Samsung I9103 V1.00] Connecting to the target...OK Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK Following devices are found on the JTAG chain: Device on TAP #0: ID = 0x4BA00477, IR Length = 0x04 bits Device on TAP #1: ID = 0x4F1F0F0F, IR Length = 0x04 bits Total IR length: 0x0008 bits Analizing IDCODE(s) of the JTAG scan chain: 1. 0x4BA00477: Samsung S5PV300 2. 0x4BA00477: NovaThor U8500 3. 0x4BA00477: Generic CORTEX-A9 please help

04-17-2013, 06:32	#2 (permalink)
sunnet Registered User Join Date: Aug 2007 Location: manglore Posts: 347 Member: 576990 Status: Offline Thanks Meter: 11	i am waiting where is product supporter?

04-17-2013, 10:59	#3 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	RIFF JTAG Box FAQ - ERROR(0x42): Communication is not established. Terminating.