samsung s 3310 hang on logo

[hanif007]

M TRY to repair s3310 dead phone but getting error how to solve




Uploaded with ImageShack.us


pls help TEAM

[levsha]

Try several times. It may help.

Br
levsha

[b12345]

i also tried but i give me error
starting communication with resurrector....failed
error: no response from the riff box
what am i do pls help me
in this regard

[neo_49]

I m trying repair dead s3310 (erase boot)with RIFFBOX without success ,

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.16, JTAG Manager Version: 1.22
Selected Resurrector: [Samsung S3310]

Connecting to the dead body...OK
Detected dead body ID: 0x07926F0F - CORRECT!
Set I/O Voltage reads as 2.99V, TCK Frequency is 3 MHz

Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR: Communication is not established. Terminating.
REGARDS

[MDK23]

i have the same problem with S5233A

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.16, JTAG Manager Version: 1.22
Selected Resurrector: [Samsung S5230]


Connecting to the dead body...OK
Detected dead body ID: 0x07926F0F - CORRECT!
Set I/O Voltage reads as 3.01V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR: No response from the RIFF Box.

[neo_49]

Steel no reply from team,
REGARDS

[kaushik2aki]

if u will come on teamvewer i think i help u

[د.نابغ]

make sure of connect cable coz most of this problem is connect also change the speed of RTCk to lower speed like 4MH

[ranagaurav]

I have samsung s3310 show disply only boot loader
i cant flash any tool or orignal flasher bcoz jack print out is damege so i reqwest to all plz uplode tested dump

[VIJAY2U2]

i think dcc writing 4 this set is not work

if work plz tell me i have working set then i can dump it

[VIJAY2U2]

I read the dump file it is 132 mb

but when i try to write giving me this eeror

[3/18/2011 3:31:32 PM] [START OPERATION_ID = DCC_WRITE_MEMORY]
[3/18/2011 3:32:15 PM] Open serial port...OK
[3/18/2011 3:32:15 PM] Connecting to the RIFF Box...OK
[3/18/2011 3:32:15 PM] Firmware Version: 1.18, JTAG Manager Version: 1.26
[3/18/2011 3:32:15 PM] Selected Resurrector: [Samsung S3310]
[3/18/2011 3:32:15 PM] 
[3/18/2011 3:32:15 PM] Connecting to the dead body...OK
[3/18/2011 3:32:15 PM] Detected dead body ID: 0x07926F0F - IGNORED!
[3/18/2011 3:32:15 PM] Set I/O Voltage reads as 3.01V, TCK Frequency is RTCK
[3/18/2011 3:32:15 PM] Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz]
[3/18/2011 3:32:15 PM] 
[3/18/2011 3:32:15 PM] Resurrection sequence started.
[3/18/2011 3:32:15 PM] Establish communication with the phone...OK
[3/18/2011 3:32:15 PM] Uploading resurrector data into memory...OK
[3/18/2011 3:32:15 PM] Starting communication with resurrector...OK
[3/18/2011 3:32:15 PM] 
[3/18/2011 3:32:15 PM] Detected an Initialized FLASH1 Chip ID: 0xA018/0xA018 (32MB)
[3/18/2011 3:32:15 PM] 
[3/18/2011 3:32:15 PM] Writting FLASH1 memory from 0x00000000 to 0x01FFFFFFOKOKOK
[3/18/2011 3:32:15 PM] ERROR: Stopped due to multiple communication errors. Terminating at 0x00000000
[3/18/2011 3:32:15 PM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY]

[ranagaurav]

Originally Posted by vijay-gsm

i think dcc writing 4 this set is not work

if work plz tell me i have working set then i can dump it

YES DCC READ AND WRITE WORKING FINE NO ANY PROBLEM
IF U FACE ANY PROBLEM IN REAd/WRITE THEN CONTECT ME
MY BE I HELP U

[GSM RAJ]

Originally Posted by ranagaurav

YES DCC READ AND WRITE WORKING FINE NO ANY PROBLEM
IF U FACE ANY PROBLEM IN REAd/WRITE THEN CONTECT ME
MY BE I HELP U

if u have working dump . please share

br.

[..:MumbaiGsm:..]

Here is log

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.23, JTAG Manager Version: 1.32
Selected Resurrector: [Samsung S3310]

Connecting to the dead body...OK
Detected dead body ID: 0x07926F0F - CORRECT!
Set I/O Voltage reads as 3.01V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x00B1 (128MB)
Flashing the dead body...OK
Resurrection complete!

i tried to flash with SGT-S3310_BCM213x1_Downloader_v0.88(C).exe
but always error flashing image set
Tried on z3x but not boot...also manually vol+- and 9 still no BOOTLOADER on screen

how fix???

[solution4all]

use riff box to read good dump from running s3310 then write the dump and check