samsung s5360 ressurection failed - GSM-Forum

ROEZT · 08-03-2012, 14:35

help me s5360 ressurection failed here log

wherw is wrong

ROEZT · 08-03-2012, 14:48

if continue or startnew result failed

Flashing the dead body...
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...FAILED
ERROR: Failed due to multiple communication errors. Terminating at 0x0000000C0000

what more do it

hardikincai · 08-03-2012, 18:11

hellow...can help samone???

BABAK NURI · 08-03-2012, 20:30

Hi
usually you need check connection,also need hold and keep "Power on Key" During resurrect

Please Read:
RIFF JTAG Box FAQ - ERROR: Failed due to multiple communication errors.

ROEZT · 08-04-2012, 15:55

hi bro
I did not find any code there, so there is no other way to solve my problem
thx

virgix · 10-02-2012, 18:24

i think dll problem please check sir,i have 3 S5360 all done with other box but failed with riff...

virgix · 10-02-2012, 18:25

if anyone have succes with riff please show log detail....thx

BABAK NURI · 10-03-2012, 00:40

Hi
Please Try This:

1-check soldered wires
2-Connect power supply
3-speed at 4mhz
4-Don't use "USB" Cable...Also battery
5-Press and hold "Power on Key"
6-Start "Resurrect"

08-03-2012, 14:35	#1 (permalink)
ROEZT No Life Poster Join Date: May 2007 Location: Badui My home Posts: 546 Member: 508048 Status: Offline Thanks: 202 Thanked 126 Times in 82 Posts	samsung s5360 ressurection failed help me s5360 ressurection failed here log wherw is wrong

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
lots of service manuals Nokia, Siemens Sony Samsung etc.	-=KnOeFz=-	GSM Mobile Links	4	11-16-2011 07:42
In wintesla 3310, what does cobba parrarel failed means	brittnee	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	10	05-18-2001 16:05
MCU EEPROM contents: failed	phr3ak	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	0	02-12-2001 14:58
Nokia 5110 v. 5.24 Unlock Failed!	Cybertooth	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	3	02-28-2000 14:35
Mti init failed	dogbreak	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	3	11-22-1999 00:28

08-03-2012, 14:48	#2 (permalink)
ROEZT No Life Poster Join Date: May 2007 Location: Badui My home Posts: 546 Member: 508048 Status: Offline Thanks: 202 Thanked 126 Times in 82 Posts	if continue or startnew result failed Flashing the dead body... ERROR: Timeout while waiting for DCC Loader response. Trying to recover...FAILED ERROR: Failed due to multiple communication errors. Terminating at 0x0000000C0000 what more do it

08-03-2012, 18:11	#3 (permalink)
hardikincai Junior Member Join Date: May 2006 Location: indonesia Age: 44 Posts: 21 Member: 282409 Status: Offline Thanks: 3 Thanked 17 Times in 3 Posts	hellow...can help samone???

08-03-2012, 20:30	#4 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 32 Posts: 5,098 Member: 131131 Status: Online Sonork: 100.1606847 Thanks: 522 Thanked 1,484 Times in 971 Posts	Hi usually you need check connection,also need hold and keep "Power on Key" During resurrect Please Read: RIFF JTAG Box FAQ - ERROR: Failed due to multiple communication errors.

08-04-2012, 15:55	#5 (permalink)
ROEZT No Life Poster Join Date: May 2007 Location: Badui My home Posts: 546 Member: 508048 Status: Offline Thanks: 202 Thanked 126 Times in 82 Posts	hi bro I did not find any code there, so there is no other way to solve my problem thx

10-02-2012, 18:24	#6 (permalink)
virgix Freak Poster Join Date: Jun 2004 Posts: 457 Member: 69608 Status: Offline Thanks: 79 Thanked 62 Times in 52 Posts	i think dll problem please check sir,i have 3 S5360 all done with other box but failed with riff...

10-02-2012, 18:25	#7 (permalink)
virgix Freak Poster Join Date: Jun 2004 Posts: 457 Member: 69608 Status: Offline Thanks: 79 Thanked 62 Times in 52 Posts	if anyone have succes with riff please show log detail....thx

10-03-2012, 00:40	#8 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 32 Posts: 5,098 Member: 131131 Status: Online Sonork: 100.1606847 Thanks: 522 Thanked 1,484 Times in 971 Posts	Hi Please Try This: 1-check soldered wires 2-Connect power supply 3-speed at 4mhz 4-Don't use "USB" Cable...Also battery 5-Press and hold "Power on Key" 6-Start "Resurrect"