Samsung S7250

[Gerti]

Hi,i have one samsung s7250 that i damgaed after write boot and now the set is dead,i search in riff support for this type but i dont find,any help to revive it ?

[BABAK NURI]

Hi
If you have another working phone..Please contact me on sonork
i think we can repair your phone....

I think cpu based on BCM2155x....so,You can read/write with s5830i.dll.....(becarfull,use dll just for read/write full dump...don't try resurrect)

[Gerti]

i dont have other set,if anybody can help with dump for it ?

[北京混混]

your S7250 have ok? There are no dump file give me ? tks

[Haltec]

+1


BR



Haltec


Altough mine is test phone...


Legija - any advices?

[Haltec]

Hi BARAK


Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Samsung S7250 V1.0.4476.13359]

Connecting to the dead body...OK
Detected dead body ID: 0x07B3617F - CORRECT!
Set I/O Voltage reads as 3.01V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 2 MHz]
Settings Code: 0x2501000A000000000000000020000000

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)

Reading FLASH1 address space from 0x000000000000 to 0x00001FFFFFFF


Can you pm me link for dump of working S7250 or [email protected]



thx


Haltec

[Haltec]

Originally Posted by legija

RIFF JTAG – Samsung GT-S7250D Wave M Unbrick – Dead Boot Repair Supported

Ok - will try your way, LOL...



BR



Haltec

[Haltec]

But no go for non "D" version.

[10/9/2012 11:52:21 AM] [START OPERATION_ID = RESURRECT]
[10/9/2012 11:53:17 AM] Open serial port...OK
[10/9/2012 11:53:17 AM] Connecting to the RIFF Box...OK
[10/9/2012 11:53:17 AM] Firmware Version: 1.33, JTAG Manager Version: 1.44
[10/9/2012 11:53:17 AM] Selected Resurrector: [Samsung S7250D V1.0.4660.65212]
[10/9/2012 11:53:17 AM] 
[10/9/2012 11:53:17 AM] Connecting to the dead body...OK
[10/9/2012 11:53:17 AM] Detected dead body ID: 0x07B3617F - CORRECT!
[10/9/2012 11:53:17 AM] Set I/O Voltage reads as 3.01V, TCK Frequency is RTCK
[10/9/2012 11:53:17 AM] Adaptive Clocking RTCK Sampling is: [Sample at 2 MHz]
[10/9/2012 11:53:17 AM] 
[10/9/2012 11:53:17 AM] Resurrection sequence started.
[10/9/2012 11:53:17 AM] Establish communication with the phone...OK
[10/9/2012 11:53:17 AM] Initializing internal hardware configuration...OK
[10/9/2012 11:53:17 AM] Uploading resurrector data into memory...OK
[10/9/2012 11:53:17 AM] Starting communication with resurrector...OK
[10/9/2012 11:53:17 AM] 
[10/9/2012 11:53:17 AM] Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
[10/9/2012 11:53:17 AM] Selected Resurrection Data for the NAND Chip with Page size = 4KB
[10/9/2012 11:53:17 AM] 
[10/9/2012 11:53:17 AM] Flashing the dead body...OK
[10/9/2012 11:53:17 AM] Resurrection complete!
[10/9/2012 11:53:17 AM] [FINISH OPERATION_ID = RESURRECT]

Welcome to RareFile.net - Download S7250_Pinout.rar Full pcb pictured inside. This no "D" model have no flashlight hw, but still... dead like brick after ressurection...


Does anyone have opened "D" on the table to compare?

Device manager doesnt seems to pickup anything at all...



Any advice(s)?


BR


Haltec

[Haltec]

Does anyone have full dump (RIFF) for this phone S7250 ???




BR

Haltec

[rkinfo_khan]

Originally Posted by Haltec

Does anyone have full dump (RIFF) for this phone S7250 ???


did u find the dump ,even i need it very urgently



BR

Haltec

did u find the dump ,even i need it very urgently