samsung s8530 erasing err in riff box - GSM-Forum

ali_imran · 09-06-2012, 13:22

phone stuck on bada i will try to flash.
flashing 100% but still stuck on bada
when i will erase in riff box show err 24

i have readed working dupm but cant write show always err

plz help how to fix it?

ali_imran · 09-06-2012, 13:44

i will check in riff support RIFF JTAG Box FAQ - Error code 0x24
but still same

**legija** · 09-06-2012, 13:45

RIFF JTAG Box FAQ - Error code 0x24

ali_imran · 09-06-2012, 15:09

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.33, JTAG Manager Version: 1.44
Selected Resurrector: [Samsung S8530 V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.79V, TCK Frequency is 8 MHz
Settings Code: 0x25010B08000000000000000020000000

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)

Resuming write FLASH1 memory from 0x000000000000 to 0x00001FFFFFFF on 0x000015340000
Completed in 00:09:49.032 (Average Transfer Rate: 917.90 kB/s)
write dump ok but still stuck on bada

ali_imran · 09-06-2012, 15:26

i will try downloader but still same stuck on bada

asifali9359 · 06-08-2014, 12:36

thanxxxxxxxxxxxxxxxxxxxxxxxx

09-06-2012, 13:45	#3 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	RIFF JTAG Box FAQ - Error code 0x24

09-06-2012, 15:09	#4 (permalink)
ali_imran No Life Poster Join Date: Apr 2007 Location: India Posts: 1,998 Member: 481609 Status: Offline Sonork: 100.1659889 Thanks Meter: 367	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.33, JTAG Manager Version: 1.44 Selected Resurrector: [Samsung S8530 V1.00] Connecting to the dead body...OK Detected dead body ID: 0x1BA00477 - CORRECT! Set I/O Voltage reads as 2.79V, TCK Frequency is 8 MHz Settings Code: 0x25010B08000000000000000020000000 Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB) Resuming write FLASH1 memory from 0x000000000000 to 0x00001FFFFFFF on 0x000015340000 Completed in 00:09:49.032 (Average Transfer Rate: 917.90 kB/s) write dump ok but still stuck on bada

06-08-2014, 12:36	#6 (permalink)
asifali9359 Junior Member Join Date: Nov 2012 Posts: 3 Member: 1841219 Status: Offline Sonork: asifali9359 Thanks Meter: 0	thanxxxxxxxxxxxxxxxxxxxxxxxx