Samsung T999 after ressurrect still ask for QDLoader 9008 Driver

[cccdigital]

Samsung T999 after ressurrect still ask for QDLoader 9008 Driver

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [Samsung T999 V1.0.4716.5824]

Connecting to the dead body...OK
Detected dead body ID: 0x407910E1 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is 4 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0000 (000000, 0x000400000000 Bytes = 16.00 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0000 (000000, 0x000000080000 Bytes = 0.50 MB)

Flashing the dead body...OK
Resurrection complete!


please help with this..

if i try emmc plugins:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [Samsung T999 V1.0.4716.5824]

Connecting to the dead body...OK
Detected dead body ID: 0x407910E1 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is 4 MHz
Settings Code: 0x05010900000000000000000400000000

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0000 (000000, 0x000400000000 Bytes = 16.00 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0000 (000000, 0x000000080000 Bytes = 0.50 MB)

Reading FLASH1 address space from 0x000000000000 to 0x0000000001FF
Completed in 00:00:00.032 (Average Transfer Rate: 65535999.97 kB/s)
ERROR: Expected signature word 0x55AA, but found different. Cannot continue.
Analisis is stopped. So far were found: 0 partitions.


Reading FLASH1 address space from 0x000000004400 to 0x0000000045FF
Completed in 00:00:00.016 (Average Transfer Rate: 131071999.94 kB/s)

Reading FLASH1 address space from 0x000000080000 to 0x0000000801FF
Completed in 00:00:00.015 (Average Transfer Rate: 139810133.27 kB/s)

Reading FLASH1 address space from 0x000000000000 to 0x0000000003FF
Completed in 00:00:00.016 (Average Transfer Rate: 131071999.94 kB/s)
ERROR: Cannot find valid PIT table.

[BABAK NURI]

Hi
Can you tell me about phone history?

can you contact me via sonork for now?
i see you are online

Thanks

[flin18]

Same problem,success the riff box

Flashing the dead body...OK
Resurrection complete!

history : team came back from android 4.2 to 4.1 longer no start


exists solution?

[ana_ye]

same problem here with dead T999, resurrection completed but phone is still dead?

WBR

[rajesh_ch]

Originally Posted by ana_ye

same problem here with dead T999, resurrection completed but phone is still dead?

WBR

same problem with me.resurrection done but still dead