Samung tablet P5100 deadboot resurectok but not power on - GSM-Forum

kariakala · 11-08-2014, 15:17

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung P5100 XLoader+ V1.0.4773.9895]

Connecting to the dead body...OK
Detected dead body ID: 0x3BA00477 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0100/0x0015 (MAG2GA, 0x0003AB400000 Bytes = 14.68 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0100/0x0015 (MAG2GA, 0x000000200000 Bytes = 2.00 MB)

Selected Resurrection Data for the eMMC Chip with Capacity = 14.68GB

Flashing the dead body...OK
Resurrection complete!

still not alive?
what next step I can check?

Tablet is in good condition I mean no water damage or anyone tried to repair it.
I try to serachbut not able to find correct way to fix it.( resurrectok

BABAK NURI · 11-09-2014, 13:00

Hi
if your phone have suddenly dead,This is HW and 99% is eMMC Problem

kariakala · 11-09-2014, 13:20

still any file I Can try to flash as its only detected omap 4xx driver found. any bat file of flash file guide?
Thanks.

11-08-2014, 15:17	#1 (permalink)
kariakala No Life Poster Join Date: Sep 2008 Location: India Posts: 1,963 Member: 851193 Status: Offline Sonork: 100.1615313 Thanks Meter: 348	Samung tablet P5100 deadboot resurectok but not power on Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.56 Selected Resurrector: [Samsung P5100 XLoader+ V1.0.4773.9895] Connecting to the dead body...OK Detected dead body ID: 0x3BA00477 - CORRECT! Set I/O Voltage reads as 2.60V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0100/0x0015 (MAG2GA, 0x0003AB400000 Bytes = 14.68 GB) Detected an Initialized FLASH2 Chip, ID: 0x0100/0x0015 (MAG2GA, 0x000000200000 Bytes = 2.00 MB) Selected Resurrection Data for the eMMC Chip with Capacity = 14.68GB Flashing the dead body...OK Resurrection complete! still not alive? what next step I can check? Tablet is in good condition I mean no water damage or anyone tried to repair it. I try to serachbut not able to find correct way to fix it.( resurrectok

11-09-2014, 13:00	#2 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 43 Posts: 7,259 Member: 131131 Status: Offline Sonork: 100.1606847 Thanks Meter: 4,475	Hi if your phone have suddenly dead,This is HW and 99% is eMMC Problem

11-09-2014, 13:20	#3 (permalink)
kariakala No Life Poster Join Date: Sep 2008 Location: India Posts: 1,963 Member: 851193 Status: Offline Sonork: 100.1615313 Thanks Meter: 348	still any file I Can try to flash as its only detected omap 4xx driver found. any bat file of flash file guide? Thanks.