Shutdown after restoration boot huawei G510-0200 !!! - GSM-Forum

doctor-omid · 01-23-2014, 00:52

Shutdown after restoration boot huawei G510-0200
I was on the phone attempting to mend boot off after restoration
G510 hangs in logo try to repair boot and now not power on only detect by pc in qualcom need help for repair this phone
Please help me Professor

Performance logs
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [Huawei G510 V1.0.4969.38225]

Connecting to the dead body...OK
Detected dead body ID: 0x107730E1 - IGNORED!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (M00SJS, 0x0000E9000000 Bytes = 3.64 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (M00SJS, 0x000000100000 Bytes = 1.00 MB)

Flashing the dead body...OK
Resurrection complete!

BABAK NURI · 01-23-2014, 10:56

Hi
Please check your email....we have call yestreday D:

kumgro · 02-13-2014, 01:30

Same problem with the G510-0200. Help please. Thanks in advance.

tool_box · 03-03-2014, 06:30

sir pls share full dump i have one unit logo only when i try to reset badly needed full dump plss

fazargsm · 08-01-2014, 04:01

Quote:

Originally Posted by BABAK NURI

Hi
Please check your email....we have call yestreday D:

bro why dont u share solution on forum????

many guys waiting for solution at least share full dump!!!!!!!!!!
its me alos have now g510-0200, stuck on logo i was try pdate firmware using sd .
but after unpack update fail with sd card official firmware, i was unlock bootloader using sigma but same error so i think now only way try full dump write?????????

01-23-2014, 00:52	#1 (permalink)
doctor-omid Junior Member Join Date: Jan 2011 Posts: 5 Member: 1490531 Status: Offline Sonork: ok Thanks Meter: 1	Shutdown after restoration boot huawei G510-0200 !!! Shutdown after restoration boot huawei G510-0200 I was on the phone attempting to mend boot off after restoration G510 hangs in logo try to repair boot and now not power on only detect by pc in qualcom need help for repair this phone Please help me Professor Performance logs Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.55 Selected Resurrector: [Huawei G510 V1.0.4969.38225] Connecting to the dead body...OK Detected dead body ID: 0x107730E1 - IGNORED! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (M00SJS, 0x0000E9000000 Bytes = 3.64 GB) Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (M00SJS, 0x000000100000 Bytes = 1.00 MB) Flashing the dead body...OK Resurrection complete!

01-23-2014, 10:56	#2 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 43 Posts: 7,259 Member: 131131 Status: Offline Sonork: 100.1606847 Thanks Meter: 4,475	Hi Please check your email....we have call yestreday D:

02-13-2014, 01:30	#3 (permalink)
kumgro Junior Member Join Date: Jan 2006 Posts: 21 Member: 220219 Status: Offline Thanks Meter: 2	Same problem with the G510-0200. Help please. Thanks in advance.

03-03-2014, 06:30	#4 (permalink)
tool_box Junior Member Join Date: Jul 2013 Location: quezon city phillipines Posts: 26 Member: 1982435 Status: Offline Sonork: 100.1641548 Thanks Meter: 2	sir pls share full dump i have one unit logo only when i try to reset badly needed full dump plss