GSM-Forum - [Solved] HTC evo 3D

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- RIFFBOX (https://forum.gsmhosting.com/vbb/f634/)

- - [Solved] HTC evo 3D - camera problem (https://forum.gsmhosting.com/vbb/f634/solved-htc-evo-3d-camera-problem-1449240/)

when riff can support HTC evo 3d?
we need new model update.
thanks:cool:

Hi
i need repair boot for htc evo 3d.

evo 3d boot reapair?

Help to repair boot...

world first HTC EVO 3D Boot Repair done

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.31, JTAG Manager Version: 1.41
Selected Resurrector: [HTC EVO3D (PG86300) V1.0.4456.5060]
Connecting to the dead body...OK
Detected dead body ID: 0x104210E1 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 9 MHz]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0000 (KLL00M, 0x000090000000 Bytes = 2.25 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0000 (KLL00M, 0x000000080000 Bytes = 0.50 MB)
Flashing the dead body...OK
Resurrection complete!
thnk riff team :)

that is very good my friend

good box & good team

ur first man make evo3d boot :)

B.R.
Mobitec

Obviously, it was us who repaired this phone first in the world. :D

So, Yaracell, You're 2nd there. :D

u the boss mr legija

Code:

Open serial port...OK

Connecting to the RIFF Box...OK

Firmware Version: 1.31, JTAG Manager Version: 1.41

Selected Resurrector: [HTC EVO3D (PG86300) V1.0.4456.5060]
 

Connecting to the dead body...OK

Detected dead body ID: 0x104210E1 - CORRECT!

Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK

Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz]
 

Resurrection sequence started.

Establish communication with the phone...OK

Initializing internal hardware configuration...OK

Uploading resurrector data into memory...OK

Starting communication with resurrector...OK
 

WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000036

ERROR: Selected FLASH1 Chip was not Recognized by the DCC Loader. Terminating.
 

ERROR: Selected FLASH Chip was not initialized by the DCC Loader.

new type of flash chip?

It's more likely that eMMC is dead.

What's the phone history ?

dunno, cant on. issit possible to change a new flash chip and ressurect by riff?

Code:

Open serial port...OK

Connecting to the RIFF Box...OK

Firmware Version: 1.31, JTAG Manager Version: 1.41

Selected Resurrector: [HTC EVO3D (PG86300) V1.0.4456.5060]
 

Connecting to the dead body...OK

Detected dead body ID: 0x104210E1 - CORRECT!

Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK

Adaptive Clocking RTCK Sampling is: [Sample at MAX]
 

Resurrection sequence started.

Establish communication with the phone...OK

Initializing internal hardware configuration...OK

Uploading resurrector data into memory...OK

Starting communication with resurrector...OK
 

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0000 (KLL00M, 0x000090000000 Bytes = 2.25 GB)

Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0000 (KLL00M, 0x000000080000 Bytes = 0.50 MB)
 

Flashing the dead body...OK

ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK

ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK

ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK

Resurrection complete!

another pcs success. maybe previous phone flash chip dead .

And i want to be the third person in the word....

My 3D evo gsm, was bricked by the customer.

First state, when i power on, i got endless boot with htc logo.

I can enter in fastboot, the hboot is 1.49.0018 s-on, unloked(htcdev.com), radio 10.14.9020.06_M, and can`t flash or recovery with any software, so i decide to use riff box.

Resurescrtion was ok, but after, the hboot is the same 1.49.0018.

The phone is in the same state, but relocked, the only change is the `shooter beats` logo with sound and the phone is restarting again and again....

After resurection i try few rom`s stock, but i got the same error, 140 or other, i dont remember....

Any ideea???

Regards..

Have You tried to update IMEI and write SuperCID ?

Not yet, only simple resurection.

Tomorow i will try and post the result...

@gabrielgsm
it seem u can enter fastboot mode,
so u can read original cid with adb using this command
fastboot getvar cid
or
fastboot getvar cidnum

u can even get current sw version using this command,
fastboot getvar version-main

br:)