[SOLVED] T959 repair done but not turn on

[XpErTsGsM]

Dear Team ..........

i have one T959 bricked i repair it also done grimlen zone.. but phone not turning on or going in download mode.. i also try with resiter usb UART connect to force download mode for this samsung but noting.. same its also not take driver but its repairing it secsessfully so dear legija plz help and guide me

here is the log...

[6/24/2011 11:26:54 PM] [START OPERATION_ID = RESURRECT]
[6/24/2011 11:27:13 PM] Open serial port...OK
[6/24/2011 11:27:13 PM] Connecting to the RIFF Box...OK
[6/24/2011 11:27:13 PM] Firmware Version: 1.25, JTAG Manager Version: 1.33
[6/24/2011 11:27:13 PM] Selected Resurrector: [Samsung T959]
[6/24/2011 11:27:13 PM]
[6/24/2011 11:27:13 PM] Connecting to the dead body...OK
[6/24/2011 11:27:13 PM] Detected dead body ID: 0x1BA00477 - CORRECT!
[6/24/2011 11:27:13 PM] Set I/O Voltage reads as 2.79V, TCK Frequency is 8 MHz
[6/24/2011 11:27:13 PM]
[6/24/2011 11:27:13 PM] Resurrection sequence started.
[6/24/2011 11:27:13 PM] Establish communication with the phone...OK
[6/24/2011 11:27:13 PM] Initializing internal hardware configuration...OK
[6/24/2011 11:27:13 PM] Uploading resurrector data into memory...OK
[6/24/2011 11:27:13 PM] Starting communication with resurrector...OK
[6/24/2011 11:27:13 PM]
[6/24/2011 11:27:13 PM] Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0050 (512MB)
[6/24/2011 11:27:13 PM] Flashing the dead body...OK
[6/24/2011 11:27:13 PM] Resurrection complete!
[6/24/2011 11:27:13 PM] [FINISH OPERATION_ID = RESURRECT]

[Rahul_Bhutani]

Select I9000 Then Try Again.

[XpErTsGsM]

done solved

pen serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.25, JTAG Manager Version: 1.33
Selected Resurrector: [Samsung T959V]

Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.79V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0050 (512MB)
Selected Resurrection Data for the NAND Chip with Page size = 4KB

Flashing the dead body...OK
Resurrection complete!





After selecting T959 v and chking kernel and gremlin zone repair............ now phone is in download mode.......................

becoz after alot of tries i was thinking what it could be the i9000 thing i have done before but not turning on so the real problem was damge kernel ....


but thanx any way dear ...........

[janakaprasadab]

Hi,

You saved my day..
I had the same Issue.. Adter seying your post.. I also did the same.. Now Phone is up and running..

Thanks for the valuable information

[connexion2005]

Glad you got it going. It's not a big bug as i9000 works fine but this does need to be corrected as it causes a lot of these threads and it would be an easy fix.

[mpfa]

I had here a T959 for repair and after successful resurrection with T959 resurector, phone didn't power on and couldn't put it in download mode...

Found this thread and when using T959V resurector, finally phone has download mode... now I'm going to flash a stock rom on it ;-)

This glitch should be solved in JTAG Manager (at least make some reference to this in resurrection help...)

Regards