GSM-Forum - Successful repair boot i9100g with riff

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- RIFFBOX (https://forum.gsmhosting.com/vbb/f634/)

- - Successful repair boot i9100g with riff (https://forum.gsmhosting.com/vbb/f634/successful-repair-boot-i9100g-riff-1442043/)

Successful repair boot i9100g with riff

hi
after kill my i9100g with ort:damage sbl1!!!
i try repair whit riff and ok phone back to download mod...
only xloader+ for pcb i9100g 0G rev2.2 and not working for other pcb &rev...

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.30, JTAG Manager Version: 1.40
Selected Resurrector: [Samsung i9100G XLoader+ V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x3BA00477 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0001 (0x0003AB400000 Bytes = 14.68 GB)

Flashing the dead body...OK
Resurrection complete!

after repair flash with spt box and phone working good and back alive

Detect Phone Connect ...
Connect Phone OK.
Get PIT for Mapping ...
Sending MLO Data ...
Sending Sbl Data ...
Sending Param Data ...
Sending zImage Data ...
Sending Factoryfs Data ...
Sending Cache Data ...
Sending Phone Data ...
Sending Csc Data ...
Please Wait Reboot Phone ...
Update Flash OK!
Total Time: 118.28 s

thanks mr legija and riff team:)

how do you do all this..plz please teach me..tq

nice work all know mr behtash is the best in world of gsm.thanks in advanced

Quote:

Originally Posted by muimie (Post 8334358)

how do you do all this..plz please teach me..tq

Hi
I9100G Possible Repair If Have Correct ID:

Quote:

Detected dead body ID: 0x3BA00477 - CORRECT!

But If dead Phone Have ID : 0XFFFFFFFF......You Can't Repair,Because Cpu is in Sleep Mode..

Quote:

Detected dead body ID:0xFFFFFFFF

@BABAK NURI
Any Sultion about this Detected dead body ID:0xFFFFFFFF ?

Quote:

Originally Posted by hussainafridi (Post 8336710)

Any Sultion about this Detected dead body ID:0xFFFFFFFF ?

Hi....Not Possible for now

mr nuri now u do this option in iran
not u want to share this Solution in us forum?

Quote:

Originally Posted by javad_sat (Post 8343060)

mr nuri now u do this option in iran
not u want to share this Solution in us forum?

Hi...
It's same But Little Different

I9100G based On Omap4430 and Need Release MLO/A Loader By Samsung

We need Wait Until Release,Then Support Via Jtag....

We hope it will relase soon

Quote:

Originally Posted by BABAK NURI (Post 8344235)

Hi...
It's same But Little Different

I9100G based On Omap4430 and Need Release MLO/A Loader By Samsung

We need Wait Until Release,Then Support Via Jtag....

For your info, this method to recovered sleep/dead I9100G By Samsung.

Code:

kozio -v -omap 3 -2 -p SDP_MDDR_HYNIX_4G -t 60 chip_erase NAND 0
 

  » OMAPTOOL  vX.X (MMM DD YYYY)
 

  » Please turn off device

  » Please turn on device

  » Waiting for device

  » Found device

  » Searching 2nd for: SDP_MDDR_HYNIX_4G 363007 07 GP

  » Loading second file Targets\2nd-Downloaders\dnld_startup_3630sdp_gp_hynix_4g.2nd

  » Transferring second file to target (0x5FF8 bytes)

  » Found device

  » Waiting for 2nd

  » Found 2nd

  » Downloading 'Targets\Flash-Drivers\nand_onfi_16bit_8bit.bin'

  » Sending data (11412 bytes) :::::::::::::::::::: [11412]

           Interface 'OMAPFLASH DRIVER v1'

           Driver 'NAND ONFI 16/8 BIT'

           NAND ONFIv2 VENDOR 0x2C MICRON

           NAND 16 BIT DEVICE 0xBC MT29F4G16ABC

           NAND 2048 BYTES/PAGE (SPARE 64)

           NAND 64 PAGES/BLOCK (131072 BYTES/BLOCK)

           NAND 4096 BLOCKS/UNIT (536870912 BYTES/UNIT)

           NAND 512 MB TOTAL SIZE

           NAND ONFI DRIVER INIT COMPLETE

  » Downloading complete

  » Elapsed time: 0:00.344 (33174 bytes/s)

  » End loading driver

  » Erasing

           name=NAND            address=0x28000000

           Erasing to end of device starting at 0x28000000

           Erase progress :::::::::::::::::::: [536870912]

           NAND ERASED 535691264 BYTES FROM ADDRESS 0x28000000 (9 BAD BLOCKS)

  » Elapsed time: 0:24.571

Code:

kozio -omap 3 -2 -p SDP_MDDR_HYNIX_4G -t 60 chip_download NAND .\test_data\pattern_10M.bin
 

  » OMAPTOOL vX.X (MMM DD YYYY)
 

  » Please turn off device

  » Please turn on device

  » Waiting for device

  » Found device

  » Searching 2nd for: SDP_MDDR_HYNIX_4G 363007 07 GP

  » Loading second file Targets\2nd-Downloaders\dnld_startup_3630sdp_gp_hynix_4g.2nd

  » Transferring second file to target (0x5FF8 bytes)

  » Found device

  » Waiting for 2nd

  » Found 2nd

  » Downloading driver

  » Downloading 'Targets\Flash-Drivers\nand_onfi_16bit_8bit.bin'

  » Sending data (11412 bytes) :::::::::::::::::::: [11412]

  » Downloading complete

  » Elapsed time: 0:00.391 (29186 bytes/s)

  » End loading driver

  » Downloading

  » Downloading '.\test_data\pattern_10M.bin'

  » Sending data (10485760 bytes) :::::::::::::::::::: [10485760]

  » Downloading complete

  » Elapsed time: 0:35.095 (299593 bytes/s)

  » Elapsed time: 0:35.334

with what box?

where the phone id ?

Bit late, but....

FlashTool 01.06.00.00

BR

Haltec

Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung i9100G XLoader+ V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x3BA00477 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0001 (0x0003AB400000 Bytes = 14.68 GB)

Flashing the dead body...OK
Resurrection complete! but not power on ple hailp

Quote:

Originally Posted by dewoo (Post 9186840)

use FlashTool 01.06.00.00 +firmware and flash it

plz Boot Repair d720