Successful repair boot i9100g with riff - GSM-Forum

behtash · 03-12-2012, 13:56

hi
after kill my i9100g with ort:damage sbl1!!!
i try repair whit riff and ok phone back to download mod...
only xloader+ for pcb i9100g 0G rev2.2 and not working for other pcb &rev...

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.30, JTAG Manager Version: 1.40
Selected Resurrector: [Samsung i9100G XLoader+ V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x3BA00477 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0001 (0x0003AB400000 Bytes = 14.68 GB)

Flashing the dead body...OK
Resurrection complete!

after repair flash with spt box and phone working good and back alive

Detect Phone Connect ...
Connect Phone OK.
Get PIT for Mapping ...
Sending MLO Data ...
Sending Sbl Data ...
Sending Param Data ...
Sending zImage Data ...
Sending Factoryfs Data ...
Sending Cache Data ...
Sending Phone Data ...
Sending Csc Data ...
Please Wait Reboot Phone ...
Update Flash OK!
Total Time: 118.28 s

thanks mr legija and riff team

muimie · 04-19-2012, 10:21

how do you do all this..plz please teach me..tq

.::PHONECRAKER::. · 04-19-2012, 14:07

nice work all know mr behtash is the best in world of gsm.thanks in advanced

BABAK NURI · 04-19-2012, 18:11

Quote:

Originally Posted by muimie

how do you do all this..plz please teach me..tq

Hi
I9100G Possible Repair If Have Correct ID:

Quote:

Detected dead body ID: 0x3BA00477 - CORRECT!

But If dead Phone Have ID : 0XFFFFFFFF......You Can't Repair,Because Cpu is in Sleep Mode..

Quote:

Detected dead body ID:0xFFFFFFFF

hussainafridi · 04-20-2012, 07:10

@BABAK NURI
Any Sultion about this Detected dead body ID:0xFFFFFFFF ?

BABAK NURI · 04-20-2012, 11:38

Quote:

Originally Posted by hussainafridi

Any Sultion about this Detected dead body ID:0xFFFFFFFF ?

Hi....Not Possible for now

javad_sat · 04-22-2012, 10:50

mr nuri now u do this option in iran
not u want to share this Solution in us forum?

BABAK NURI · 04-22-2012, 20:33

Quote:

Originally Posted by javad_sat

mr nuri now u do this option in iran
not u want to share this Solution in us forum?

Hi...
It's same But Little Different

I9100G based On Omap4430 and Need Release MLO/A Loader By Samsung

We need Wait Until Release,Then Support Via Jtag....

polifon · 04-28-2012, 15:28

We hope it will relase soon

SEMCSEC · 05-07-2012, 05:43

Quote:

Originally Posted by BABAK NURI

Hi...
It's same But Little Different

I9100G based On Omap4430 and Need Release MLO/A Loader By Samsung

We need Wait Until Release,Then Support Via Jtag....

For your info, this method to recovered sleep/dead I9100G By Samsung.

Code:

kozio -v -omap 3 -2 -p SDP_MDDR_HYNIX_4G -t 60 chip_erase NAND 0

  » OMAPTOOL  vX.X (MMM DD YYYY)

  » Please turn off device
  » Please turn on device
  » Waiting for device
  » Found device
  » Searching 2nd for: SDP_MDDR_HYNIX_4G 363007 07 GP
  » Loading second file Targets\2nd-Downloaders\dnld_startup_3630sdp_gp_hynix_4g.2nd
  » Transferring second file to target (0x5FF8 bytes)
  » Found device
  » Waiting for 2nd
  » Found 2nd
  » Downloading 'Targets\Flash-Drivers\nand_onfi_16bit_8bit.bin'
  » Sending data (11412 bytes) :::::::::::::::::::: [11412]
           Interface 'OMAPFLASH DRIVER v1'
           Driver 'NAND ONFI 16/8 BIT'
           NAND ONFIv2 VENDOR 0x2C MICRON
           NAND 16 BIT DEVICE 0xBC MT29F4G16ABC
           NAND 2048 BYTES/PAGE (SPARE 64)
           NAND 64 PAGES/BLOCK (131072 BYTES/BLOCK)
           NAND 4096 BLOCKS/UNIT (536870912 BYTES/UNIT)
           NAND 512 MB TOTAL SIZE
           NAND ONFI DRIVER INIT COMPLETE
  » Downloading complete
  » Elapsed time: 0:00.344 (33174 bytes/s)
  » End loading driver
  » Erasing
           name=NAND            address=0x28000000
           Erasing to end of device starting at 0x28000000
           Erase progress :::::::::::::::::::: [536870912]
           NAND ERASED 535691264 BYTES FROM ADDRESS 0x28000000 (9 BAD BLOCKS)
  » Elapsed time: 0:24.571

Code:

kozio -omap 3 -2 -p SDP_MDDR_HYNIX_4G -t 60 chip_download NAND .\test_data\pattern_10M.bin

  » OMAPTOOL vX.X (MMM DD YYYY)

  » Please turn off device
  » Please turn on device
  » Waiting for device
  » Found device
  » Searching 2nd for: SDP_MDDR_HYNIX_4G 363007 07 GP
  » Loading second file Targets\2nd-Downloaders\dnld_startup_3630sdp_gp_hynix_4g.2nd
  » Transferring second file to target (0x5FF8 bytes)
  » Found device
  » Waiting for 2nd
  » Found 2nd
  » Downloading driver
  » Downloading 'Targets\Flash-Drivers\nand_onfi_16bit_8bit.bin'
  » Sending data (11412 bytes) :::::::::::::::::::: [11412]
  » Downloading complete
  » Elapsed time: 0:00.391 (29186 bytes/s)
  » End loading driver
  » Downloading
  » Downloading '.\test_data\pattern_10M.bin'
  » Sending data (10485760 bytes) :::::::::::::::::::: [10485760]
  » Downloading complete
  » Elapsed time: 0:35.095 (299593 bytes/s)
  » Elapsed time: 0:35.334

javad_sat · 05-07-2012, 07:51

with what box?

where the phone id ?

Haltec · 11-09-2012, 01:46

Bit late, but....

FlashTool 01.06.00.00

BR

Haltec

dewoo · 02-12-2013, 11:28

Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung i9100G XLoader+ V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x3BA00477 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0001 (0x0003AB400000 Bytes = 14.68 GB)

Flashing the dead body...OK
Resurrection complete! but not power on ple hailp

moussa djamel · 02-12-2013, 12:10

Quote:

Originally Posted by dewoo

Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung i9100G XLoader+ V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x3BA00477 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0001 (0x0003AB400000 Bytes = 14.68 GB)

Flashing the dead body...OK
Resurrection complete! but not power on ple hailp

use FlashTool 01.06.00.00 +firmware and flash it

sohail_hind · 02-12-2013, 23:10

plz Boot Repair d720

03-12-2012, 13:56	#1 (permalink)
behtash Freak Poster Join Date: Oct 2005 Location: Iran Posts: 356 Member: 192198 Status: Offline Sonork: 100.1609528 Thanks Meter: 234	Successful repair boot i9100g with riff hi after kill my i9100g with ort:damage sbl1!!! i try repair whit riff and ok phone back to download mod... only xloader+ for pcb i9100g 0G rev2.2 and not working for other pcb &rev... Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.30, JTAG Manager Version: 1.40 Selected Resurrector: [Samsung i9100G XLoader+ V1.00] Connecting to the dead body...OK Detected dead body ID: 0x3BA00477 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0001 (0x0003AB400000 Bytes = 14.68 GB) Flashing the dead body...OK Resurrection complete! after repair flash with spt box and phone working good and back alive Detect Phone Connect ... Connect Phone OK. Get PIT for Mapping ... Sending MLO Data ... Sending Sbl Data ... Sending Param Data ... Sending zImage Data ... Sending Factoryfs Data ... Sending Cache Data ... Sending Phone Data ... Sending Csc Data ... Please Wait Reboot Phone ... Update Flash OK! Total Time: 118.28 s thanks mr legija and riff team

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29
NHE_8 wont work with NHEK5689.dll v3	steve	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	07-23-1999 15:48
HELP: Problem with 5110	Xabi	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	07-16-1999 00:44
Netmonitor with FBus????	ratzfatz	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	06-09-1999 17:04

04-19-2012, 10:21	#2 (permalink)
muimie Junior Member Join Date: Mar 2012 Posts: 1 Member: 1739906 Status: Offline Thanks Meter: 0	how do you do all this..plz please teach me..tq

04-19-2012, 14:07	#3 (permalink)
.::PHONECRAKER::. Freak Poster Join Date: Jul 2011 Location: Gsm college Posts: 311 Member: 1610262 Status: Offline Sonork: 100.1608508 Thanks Meter: 44	nice work all know mr behtash is the best in world of gsm.thanks in advanced

04-20-2012, 07:10	#5 (permalink)
hussainafridi No Life Poster Join Date: Jan 2008 Location: peshawar Posts: 1,172 Member: 668816 Status: Offline Sonork: no Thanks Meter: 182	@BABAK NURI Any Sultion about this Detected dead body ID:0xFFFFFFFF ?

04-22-2012, 10:50	#7 (permalink)
javad_sat Freak Poster Join Date: Dec 2011 Location: Iran-Minab=((GSM Center)) Posts: 121 Member: 1703463 Status: Offline Sonork: 100.1645756 Thanks Meter: 10	mr nuri now u do this option in iran not u want to share this Solution in us forum?

04-28-2012, 15:28	#9 (permalink)
polifon Freak Poster Join Date: Apr 2006 Location: Azerbaijan, Baku Posts: 234 Member: 254961 Status: Offline Thanks Meter: 24	We hope it will relase soon

05-07-2012, 07:51	#11 (permalink)
javad_sat Freak Poster Join Date: Dec 2011 Location: Iran-Minab=((GSM Center)) Posts: 121 Member: 1703463 Status: Offline Sonork: 100.1645756 Thanks Meter: 10	with what box? where the phone id ?

11-09-2012, 01:46	#12 (permalink)
Haltec No Life Poster Join Date: Mar 2009 Location: Europe Wienna Posts: 1,269 Member: 984046 Status: Offline Thanks Meter: 255	Bit late, but.... FlashTool 01.06.00.00 BR Haltec

02-12-2013, 11:28	#13 (permalink)
dewoo Freak Poster Join Date: May 2010 Location: INDIA Posts: 160 Member: 1302506 Status: Offline Sonork: india Thanks Meter: 14	Connecting to the RIFF Box...OK Firmware Version: 1.34, JTAG Manager Version: 1.48 Selected Resurrector: [Samsung i9100G XLoader+ V1.00] Connecting to the dead body...OK Detected dead body ID: 0x3BA00477 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0001 (0x0003AB400000 Bytes = 14.68 GB) Flashing the dead body...OK Resurrection complete! but not power on ple hailp

02-12-2013, 23:10	#15 (permalink)
sohail_hind Freak Poster Join Date: Apr 2004 Age: 42 Posts: 123 Member: 64244 Status: Offline Thanks Meter: 17	plz Boot Repair d720