toshiba tg01 dead? - GSM-Forum

gsmiulian · 02-25-2012, 11:59

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.30, JTAG Manager Version: 1.38
Selected Resurrector: [Toshiba TG01]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...FAILED
ERROR: Read/Write memory failed during H/W Init.
???

**legija** · 02-25-2012, 12:01

Hi,
Use QUALCOMM QSD8250 NAND DLL, and write TG01 full dump.

gsmiulian · 02-25-2012, 12:05

how they use? Qualcomm QSD8250 NAND DLL

gsmiulian · 02-25-2012, 12:09

Connecting to the QSD8250 target...OK
Detected dead body ID: 0x202400E1 - IGNORED!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resetting and Halting target...OK

R0 = 0x03FFFFA0 R6 = 0x00000002 R12 = 0x03E3D49C
R1 = 0x03E3D49C R7 = 0x03E51DE0 R13 = 0x5767D880
R2 = 0xA8E00044 R8 = 0x000042FE R14 = 0x7CDED055
R3 = 0xB8200000 R9 = 0x00001CB6 R15 = 0xFFFF0184
R4 = 0x00000002 R10 = 0x00001CB6 CPSR = 0x400000D1
R5 = 0x00000003 R11 = 0x03FFFFA0

Connecting to MCU's NAND Memory Controller...OK
Detected an Initialized FLASH1 Chip, ID: 0x0098/0xD5BC (512MB)

**legija** · 02-25-2012, 12:51

No, dont use Direct access plugin, that is too slow for such operation.

Use QUALCOMM QSD8xxx DLL from main menu.

gsmiulian · 02-26-2012, 15:51

done
repaired Toshiba_TG01_Unlocked_Full_backup
done
Thanks for help

02-25-2012, 11:59	#1 (permalink)
gsmiulian No Life Poster Join Date: Mar 2008 Location: FOCSANI Age: 39 Posts: 923 Member: 718470 Status: Offline Thanks Meter: 79	toshiba tg01 dead? Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.30, JTAG Manager Version: 1.38 Selected Resurrector: [Toshiba TG01] Connecting to the dead body...OK Detected dead body ID: 0x202400E1 - CORRECT! Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...FAILED ERROR: Read/Write memory failed during H/W Init. ???

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Repaired dead phone without backup	Prodigal	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	07-29-2011 11:26
help! Dead 5110 v5.30	aklishin	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	04-04-2001 11:56
nokia 5110 dead	alpha	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	02-28-2001 11:59
Is it possible to use the Nokia 6150 with the IR Port of a Toshiba Laptop?	telefonman	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	02-13-2000 20:06
6150 V5.20 WANTED --- DEAD OR ALIVE --- IT'S BETTER ALIVE ! ;)))	tcamilo	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	12-19-1999 22:30

02-25-2012, 12:01	#2 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	Hi, Use QUALCOMM QSD8250 NAND DLL, and write TG01 full dump.

02-25-2012, 12:05	#3 (permalink)
gsmiulian No Life Poster Join Date: Mar 2008 Location: FOCSANI Age: 39 Posts: 923 Member: 718470 Status: Offline Thanks Meter: 79	how they use? Qualcomm QSD8250 NAND DLL

02-25-2012, 12:09	#4 (permalink)
gsmiulian No Life Poster Join Date: Mar 2008 Location: FOCSANI Age: 39 Posts: 923 Member: 718470 Status: Offline Thanks Meter: 79	Connecting to the QSD8250 target...OK Detected dead body ID: 0x202400E1 - IGNORED! Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resetting and Halting target...OK R0 = 0x03FFFFA0 R6 = 0x00000002 R12 = 0x03E3D49C R1 = 0x03E3D49C R7 = 0x03E51DE0 R13 = 0x5767D880 R2 = 0xA8E00044 R8 = 0x000042FE R14 = 0x7CDED055 R3 = 0xB8200000 R9 = 0x00001CB6 R15 = 0xFFFF0184 R4 = 0x00000002 R10 = 0x00001CB6 CPSR = 0x400000D1 R5 = 0x00000003 R11 = 0x03FFFFA0 Connecting to MCU's NAND Memory Controller...OK Detected an Initialized FLASH1 Chip, ID: 0x0098/0xD5BC (512MB)

02-25-2012, 12:51	#5 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	No, dont use Direct access plugin, that is too slow for such operation. Use QUALCOMM QSD8xxx DLL from main menu.

02-26-2012, 15:51	#6 (permalink)
gsmiulian No Life Poster Join Date: Mar 2008 Location: FOCSANI Age: 39 Posts: 923 Member: 718470 Status: Offline Thanks Meter: 79	done repaired Toshiba_TG01_Unlocked_Full_backup done Thanks for help