Toshiba TG01 unlocking problem

[maplegsm]

always same error i pressed the reset button but not done ?




Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung I9200 V1.0.5214.45534]

Connecting to the target...OK
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK

Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x202400E1, IR Length = 0x04 bits
Total IR length: 0x0004 bits

Analizing IDCODE(s) of the JTAG scan chain:
1. 0x202400E1: Qualcomm QCS8250, H/W Rev. #2



Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung I9200 V1.0.5214.45534]

Connecting to the dead body...OK
Set I/O Voltage reads as 1.87V, TCK Frequency is RTCK

Detected dead body ID: 0x202400E1




Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Toshiba TG01 V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...FAILED
ERROR: Wrong response code from the RIFF Box: 0x45