unable to write flash file

[sshabbir]

samsung b229


Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Target: [QSC6010, 2.60V, TAP0]

Connecting to the QSC6010 target...OK
Detected dead body ID: 0x122CE0E1 - IGNORED!
Set I/O Voltage reads as 2.61V, TCK Frequency is 8 MHz

Resetting and Halting target...OK

R0 = 0x00000000 R6 = 0xA03DC95B R12 = 0xFFD40000
R1 = 0xC0000000 R7 = 0x00000000 R13 = 0xE2000080
R2 = 0x00000000 R8 = 0x0000000B R14 = 0x00000008
R3 = 0x000000A0 R9 = 0x00000001 R15 = 0x00000004
R4 = 0x00000AAA R10 = 0x88004010 CPSR = 0x800000DB
R5 = 0xD891B5E3 R11 = 0x00000000

Connecting to the NOR Memory based at 0x00000000...OK
Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x227A (8MB)

Erasing directly the NOR Memory based at 0x00000000...OK
Completed in 00:01:17.844 (Average Transfer Rate: 105.24 kB/s)

Flashing directly the NOR Memory based at 0x00000000...FAILED
ERROR: Read/Write memory failed during H/W Init.

reading and erasing flash is completely fine but unable to write flash
phone was perfect before i just want to check my riff is working or not
iam not successful with note n7000 neither with galaxy young 5360
always error
that's the reason checked with a working small cdma phone
but now im getting this error product supporter please guide me how to check my box

[Prem_India]

Go To DCC Read/Write Tab
Select Proper Model In Resurrector Setting
Click On Access Rom1 Address Space
Click On Auto FullFlash Size
Select Dump File In Main

Click On Write Flash

Post Screenshot

B.R.,