Unable to write hd2 dump

[smartengghelp]

I AM TRYING TO WRITE DUMP IN HD2 BUT ALWAYS GETTING THIS ERROR



[2/13/2013 8:22:53 PM] [START OPERATION_ID = DCC_WRITE_MEMORY]
[2/13/2013 8:22:53 PM]
[2/13/2013 8:22:53 PM] Current Settings:
[2/13/2013 8:22:53 PM] -----------------
[2/13/2013 8:22:53 PM] Address: 000000000000
[2/13/2013 8:22:53 PM] Length: 000040000000
[2/13/2013 8:22:53 PM] Address Space: ROM1
[2/13/2013 8:22:53 PM] AutoFullFlash: CHECKED
[2/13/2013 8:22:53 PM] Use End Address: UNCHECKED
[2/13/2013 8:22:53 PM] ECC Module Enabled: UNCHECKED
[2/13/2013 8:22:53 PM] Image File is Used: UNCHECKED
[2/13/2013 8:22:53 PM] Use Address as Offset: UNCHECKED
[2/13/2013 8:22:53 PM] Main (CHECKED): C:\Documents and Settings\Administrator\Desktop\HD 2 DUMP\HTC_Leo_Full512MB_00AD_55BC_Alive.bin
[2/13/2013 8:22:53 PM] Redu (UNCHECKED):
[2/13/2013 8:22:53 PM]
[2/13/2013 8:23:02 PM] Open serial port...OK
[2/13/2013 8:23:02 PM] Connecting to the RIFF Box...OK
[2/13/2013 8:23:02 PM] Firmware Version: 1.34, JTAG Manager Version: 1.48
[2/13/2013 8:23:02 PM] Selected Resurrector: [HTC HD2 (Leo) V1.00]
[2/13/2013 8:23:02 PM]
[2/13/2013 8:23:02 PM] Connecting to the dead body...OK
[2/13/2013 8:23:02 PM] Detected dead body ID: 0x202400E1 - CORRECT!
[2/13/2013 8:23:02 PM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
[2/13/2013 8:23:02 PM] Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]
[2/13/2013 8:23:02 PM] Settings Code: 0x24010009000000000000000040000000
[2/13/2013 8:23:02 PM]
[2/13/2013 8:23:02 PM] Resurrection sequence started.
[2/13/2013 8:23:02 PM] Establish communication with the phone...OK
[2/13/2013 8:23:02 PM] Initializing internal hardware configuration...OK
[2/13/2013 8:23:02 PM] Uploading resurrector data into memory...OK
[2/13/2013 8:23:02 PM] Starting communication with resurrector...OK
[2/13/2013 8:23:02 PM]
[2/13/2013 8:23:02 PM] Detected an Initialized FLASH1 Chip, ID: 0x00AD/0x55B3 (1024MB)
[2/13/2013 8:23:02 PM]
[2/13/2013 8:23:02 PM] Looking for the RIFF BOX DCCLoader USB Interface Port...FAILED
[2/13/2013 8:23:02 PM] The DCCLoader USB Interface is not found. Communication continues over the DCC Interface
[2/13/2013 8:23:02 PM]
[2/13/2013 8:23:02 PM] ERROR: Main data file size is less than requested to flash to main.
[2/13/2013 8:23:02 PM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY]



TRIED WITH 2 DUMPS BUT ALWAYS ERROR
PLZ SUZZEST ANY SOLUTION
THANKS

[legija]

RIFF JTAG Box FAQ - JTAG Manager - DCC Read/Write TAB

[smartengghelp]

hi
i have written dump now phone is dead, i think i have flashed wrong dump in phone 512mb.
its tmobile version and as i read on other thread that
HTC HD 2 have 2 models..,
1. International version = with 512 Mb Internal memory
2. T-Mobile Version = with 1024 Mb Internal memory
so i think i need tmobile 1024 mb dump..
plz anyone give me link to download the file
thanks