Urgent help HTC MAPLE100 and 110 after revived

[destinyhammed]

i revived htc maple100 and maple110 with riff box and the phone changed to
maple 120
spl-1.22.000[]from slp 1.24and after this i was unable to flash any firmware even the shipped firmware from the tmobile because d phone is from tmobile i was unable to bring d phone back to life any help thanks in advance

[legija]

You should read resurrection help first ! ! !


HTC Dash :

Resurrecting HTC Dash is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is inside.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 1.26.0000 SPL version.
Additionally, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘MAPL10000’.
As well, you can change CID - for this make sure ‘Repair Custom ID’ field is checked in the Resurrection Guide dialog.

HTC Snap:

Resurrecting HTC Snap is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is inside.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 1.22.0000 SPL version.
Additionally, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘MAPL12000’.

DO NOT just blindly click buttons, better read first !

[destinyhammed]

@legija man do u read and understand my post before u answered my little master pls read very well before u answer next time this is message again i revived maple 100 and mapl110 aka snap and the model id change to maple120 and spl change to spl 1.22 anfter that the two phone were unable to flash with any firmware even shipped rom so legija is not problem about revive instruction ok

Originally Posted by legija

You should read resurrection help first ! ! !


HTC Dash :



HTC Snap:



DO NOT just blindly click buttons, better read first !

[legija]

To get ModelID MAPLE 100, You need to use HTC Dash.

Obviously You used HTC Snap DLL.

[destinyhammed]

i revived htc maple100 and maple110 with riff box and the phone changed to
maple 120
spl-1.22.000[]from slp 1.24and after this i was unable to flash any firmware even the shipped firmware from the tmobile because d phone is from tmobile i was unable to bring d phone back to life any help thanks in advance

[destinyhammed]

Originally Posted by legija

To get ModelID MAPLE 100, You need to use HTC Dash.

Obviously You used HTC Snap DLL.

Bro now i used dash dll for the two phone now i got i d model maple100 and spl 1.26 but the problem still remain the same unable to take flash alway give verdor id error during flash and am using shipped rom to flash the phone even costum rom will just hang at the progress bar any idea about this problem

[legija]

You need to write SuperCID, too.
SuperCID is "11111111".

[destinyhammed]

ok i will try that now and get back to u

[destinyhammed]

Originally Posted by legija

You need to write SuperCID, too.
SuperCID is "11111111".

it worked my mapl100 and maple110 is back to live and got french rom thanks for the superCID solution but this superCID 11111111 need to show in riffbox manual instruction to save user time looking how to write superCID anyway thank i appriciate u peoples work i hope this box will became the box of the year very soon

[Unlock_Master]

hi can you explain how you write super cid as i tried everything there is no manual or help from any 1, can you care to explain or what to type in the cid box when resurrecting htc models please thanks