x10 after succellfull repair not power - GSM-Forum

birdonsky · 01-04-2012, 14:58

i have repair sonyericsson x10 with riff box after finished phone not power up i try to flash it but i get error with setool box
here log

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.29, JTAG Manager Version: 1.38
Selected Resurrector: [SE X10i]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 20 kHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x002C/0x55B3 (1024MB)
Selected Resurrection Data for the NAND Chip with Page size = 2KB

Preparing data. Please wait...OK
Flashing the dead body...OK
Resurrection complete!

setool log
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD "BACK" OR "VOLUME DOWN" BUTTON ...

RUNNING S1_EROM VER "R8A013"

EROM_AID : 0001
LOADER_AID : 0001
SW_AID : 0001
CUST_AID : 0001
SIM_LOCK_AID : 0001

can't get S1 command header
LOADER NOT RESPONDING
FAILED TO SETUP PHONE
Unlock FAILED
Elapsed: 45 secs.

please any help

thanks

birdonsky · 01-04-2012, 14:59

flashing log from setool

SIGNED MODE (USING SERVER)
CFG:101000000000
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD "BACK" OR "VOLUME DOWN" BUTTON ...

RUNNING S1_EROM VER "R8A013"

EROM_AID : 0001
LOADER_AID : 0001
SW_AID : 0001
CUST_AID : 0001
SIM_LOCK_AID : 0001

can't get S1 command header
LOADER NOT RESPONDING
FAILED TO SETUP PHONE
Elapsed: 631 secs.

delower10 · 01-04-2012, 15:43

Quote:

Originally Posted by birdonsky

flashing log from setool

SIGNED MODE (USING SERVER)
CFG:101000000000
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD "BACK" OR "VOLUME DOWN" BUTTON ...

RUNNING S1_EROM VER "R8A013"

EROM_AID : 0001
LOADER_AID : 0001
SW_AID : 0001
CUST_AID : 0001
SIM_LOCK_AID : 0001

can't get S1 command header
LOADER NOT RESPONDING
FAILED TO SETUP PHONE
Elapsed: 631 secs.

Its HW problem, i got success to rehot flash chip.

birdonsky · 01-04-2012, 16:03

can u give me more details where is chip and why shoul rehot it

thanks

BABAK NURI · 01-05-2012, 00:02

rehot not help only change or rebal
b'coz flash chip habe glu and if you try for rehot ,chip totlly damage

lokkinho · 01-16-2012, 11:49

Just tried resurrecting x10 xperia like what you did using riff but failed at last.

No response at all. So conclusion is hardware failure.

This model of SE is totally ***** !!

birdonsky · 01-22-2012, 20:16

Quote:

Originally Posted by delower10

Its HW problem, i got success to rehot flash chip.

It is bad solution made phone zotal dead

01-04-2012, 14:58	#1 (permalink)
birdonsky No Life Poster Join Date: Jan 2011 Location: on the earth Posts: 788 Member: 1491073 Status: Offline Sonork: 100.1608050 Thanks Meter: 49	x10 after succellfull repair not power i have repair sonyericsson x10 with riff box after finished phone not power up i try to flash it but i get error with setool box here log Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.29, JTAG Manager Version: 1.38 Selected Resurrector: [SE X10i] Connecting to the dead body...OK Detected dead body ID: 0x202400E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 20 kHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x002C/0x55B3 (1024MB) Selected Resurrection Data for the NAND Chip with Page size = 2KB Preparing data. Please wait...OK Flashing the dead body...OK Resurrection complete! setool log PLEASE ATTACH TURNED OFF PHONE NOW PRESS AND HOLD "BACK" OR "VOLUME DOWN" BUTTON ... RUNNING S1_EROM VER "R8A013" EROM_AID : 0001 LOADER_AID : 0001 SW_AID : 0001 CUST_AID : 0001 SIM_LOCK_AID : 0001 can't get S1 command header LOADER NOT RESPONDING FAILED TO SETUP PHONE Unlock FAILED Elapsed: 45 secs. please any help thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
"Deskey Device driver not found" ?? Please help	DivAdonis	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	06-08-2017 13:21
6110 power does not stay on	sc~micro	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	08-30-2014 08:14
5110 5.24 locked all 4 locks after unlocking...	MCG	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	03-07-2000 22:24
Nokia 5110 - "SIMcard not accepted".	Kond	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	03-02-2000 22:46
winlock wintesla m2bus do not work	Bigbrothers2000	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	01-26-2000 14:31

01-04-2012, 14:59	#2 (permalink)
birdonsky No Life Poster Join Date: Jan 2011 Location: on the earth Posts: 788 Member: 1491073 Status: Offline Sonork: 100.1608050 Thanks Meter: 49	flashing log from setool SIGNED MODE (USING SERVER) CFG:101000000000 PLEASE ATTACH TURNED OFF PHONE NOW PRESS AND HOLD "BACK" OR "VOLUME DOWN" BUTTON ... RUNNING S1_EROM VER "R8A013" EROM_AID : 0001 LOADER_AID : 0001 SW_AID : 0001 CUST_AID : 0001 SIM_LOCK_AID : 0001 can't get S1 command header LOADER NOT RESPONDING FAILED TO SETUP PHONE Elapsed: 631 secs.

01-04-2012, 16:03	#4 (permalink)
birdonsky No Life Poster Join Date: Jan 2011 Location: on the earth Posts: 788 Member: 1491073 Status: Offline Sonork: 100.1608050 Thanks Meter: 49	can u give me more details where is chip and why shoul rehot it thanks

01-05-2012, 00:02	#5 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 43 Posts: 7,259 Member: 131131 Status: Offline Sonork: 100.1606847 Thanks Meter: 4,475	rehot not help only change or rebal b'coz flash chip habe glu and if you try for rehot ,chip totlly damage

01-16-2012, 11:49	#6 (permalink)
lokkinho Freak Poster Join Date: Dec 2006 Posts: 99 Member: 408989 Status: Offline Thanks Meter: 21	Just tried resurrecting x10 xperia like what you did using riff but failed at last. No response at all. So conclusion is hardware failure. This model of SE is totally ***** !!