X10i big problem....

[gsmsumon]

Resurrection complete![/COLOR] but set not run only vibrating.....now what can i do ?

[legija]

You can read RIFF section rules, and provide required information first.

[gsmsumon]

Here is Log ...

[4/7/2012 6:54:35 PM] [START OPERATION_ID = RESURRECT]
[4/7/2012 6:54:36 PM] Open serial port...OK
[4/7/2012 6:54:36 PM] Connecting to the RIFF Box...OK
[4/7/2012 6:54:36 PM] Firmware Version: 1.32, JTAG Manager Version: 1.42
[4/7/2012 6:54:36 PM] Selected Resurrector: [SE X10i V1.00]
[4/7/2012 6:54:36 PM]
[4/7/2012 6:54:36 PM] Connecting to the dead body...FAILED
[4/7/2012 6:54:36 PM] None is detected.
[4/7/2012 6:54:36 PM] [FINISH OPERATION_ID = RESURRECT]

[4/7/2012 6:58:15 PM] [START OPERATION_ID = RESURRECT]
[4/7/2012 6:59:35 PM] Open serial port...OK
[4/7/2012 6:59:35 PM] Connecting to the RIFF Box...OK
[4/7/2012 6:59:35 PM] Firmware Version: 1.32, JTAG Manager Version: 1.42
[4/7/2012 6:59:35 PM] Selected Resurrector: [SE X10i V1.00]
[4/7/2012 6:59:35 PM]
[4/7/2012 6:59:35 PM] Connecting to the dead body...OK
[4/7/2012 6:59:35 PM] Detected dead body ID: 0x202400E1 - CORRECT!
[4/7/2012 6:59:35 PM] Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
[4/7/2012 6:59:35 PM] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[4/7/2012 6:59:35 PM]
[4/7/2012 6:59:35 PM] Resurrection sequence started.
[4/7/2012 6:59:35 PM] Establish communication with the phone...OK
[4/7/2012 6:59:35 PM] Initializing internal hardware configuration...OK
[4/7/2012 6:59:35 PM] Uploading resurrector data into memory...OK
[4/7/2012 6:59:35 PM] Starting communication with resurrector...OK
[4/7/2012 6:59:35 PM]
[4/7/2012 6:59:35 PM] Detected an Initialized FLASH1 Chip, ID: 0x002C/0x55B3 (1024MB)
[4/7/2012 6:59:35 PM] Selected Resurrection Data for the NAND Chip with Page size = 2KB
[4/7/2012 6:59:35 PM]
[4/7/2012 6:59:35 PM] Preparing data. Please wait...OK
[4/7/2012 6:59:35 PM] Flashing the dead body...OK
[4/7/2012 6:59:35 PM] Resurrection complete!



Brand and Model :Sony Ericsson X10i

Device state : now only vibrating

[BABAK NURI]

Hi
@_gsmsumon

if you try repair boot,also TA and imei and reflash with flasher tools but still same problem,it's HW fault......
just search on forum or google for see how many user haved same problem with you


http://forum.gsmhosting.com/vbb/f634...odels-1312493/

[gsmsumon]

MY x10i now repair done & my set 100% ok but no riff done by Medusa box ..

[keaelite]

Originally Posted by gsmsumon

MY x10i now repair done & my set 100% ok but no riff done by Medusa box ..

toinks..........................

[ndhay]

Originally Posted by gsmsumon

MY x10i now repair done & my set 100% ok but no riff done by Medusa box ..

lucky you have a lot j-tag tool...