XPERIA X10i RESURRECTION PROBLEM

[tooko]

Hi,

I have tried to repair dead X10i

Connecting to the RIFF Box...OK
Firmware Version: 1.33, JTAG Manager Version: 1.44
Selected Resurrector: [SE X10i V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected a Not Initialized FLASH2 Chip, ID: 0xAAAA/0xAAAA (256MB)
Selected Resurrection Data for the NAND Chip with Page size = 2KB

Preparing data. Please wait...OK
Flashing the dead body...
ERROR: DCC Loader has reported Error Code = 0x26 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x26 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x26 (0x000000). Trying to recover...OK
ERROR: Stopped due to multiple communication errors. Terminating at 0x000000000000

here is what I get.
Is there any solution to fix this ?

Thanks
B. R.

[tooko]

please if anyone 'd handled this kind of problem, can you give me a clue ?

thanks

[smarttimes]

Seeems to be like this one
http://forum.gsmhosting.com/vbb/f634...orter-1412314/
But i have no experience with that error on any phone. You may want to contact that user and see if he succeded

[ndagi]

Originally Posted by tooko

Hi,

I have tried to repair dead X10i

Connecting to the RIFF Box...OK
Firmware Version: 1.33, JTAG Manager Version: 1.44
Selected Resurrector: [SE X10i V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected a Not Initialized FLASH2 Chip, ID: 0xAAAA/0xAAAA (256MB)
Selected Resurrection Data for the NAND Chip with Page size = 2KB

Preparing data. Please wait...OK
Flashing the dead body...
ERROR: DCC Loader has reported Error Code = 0x26 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x26 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x26 (0x000000). Trying to recover...OK
ERROR: Stopped due to multiple communication errors. Terminating at 0x000000000000

here is what I get.
Is there any solution to fix this ?

Thanks
B. R.

have same mobile but cant fint jtagg pinout anywhere even though i have riff box! please point to the pads so i can attempt to repair mibe and possibly help u too in the process!
regards
ndagi

[tooko]

Originally Posted by ndagi

have same mobile but cant fint jtagg pinout anywhere even though i have riff box! please point to the pads so i can attempt to repair mibe and possibly help u too in the process!
regards
ndagi

here is the pinout, just need to scratch and take away the sticker. I have used a JTAG adapter ( very useful, do not have to solder ).

BR