zte 1602 strange problem

[vinodkumarswc]

zte 1602 i write tested 8mb china dump
but it goes white screen
i have tested this dump many time
pls help me



few log




[START OPERATION_ID = GET_DEVICE_ID]
[6/6/2012 11:46:36 AM] Open serial port...OK
[6/6/2012 11:46:36 AM] Connecting to the RIFF Box...OK
[6/6/2012 11:46:36 AM] Firmware Version: 1.32, JTAG Manager Version: 1.43
[6/6/2012 11:46:36 AM] Selected Resurrector: [ZTE S1602 V1.00]
[6/6/2012 11:46:36 AM]
[6/6/2012 11:46:36 AM] Connecting to the dead body...OK
[6/6/2012 11:46:36 AM] Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
[6/6/2012 11:46:36 AM]
[6/6/2012 11:46:36 AM] Detected dead body ID: 0x122CE0E1
[6/6/2012 11:46:36 AM] [FINISH OPERATION_ID = GET_DEVICE_ID]

[6/6/2012 11:46:43 AM] [START OPERATION_ID = DIRECT_WRITE_MEMORY]
[6/6/2012 11:46:43 AM] Open serial port...OK
[6/6/2012 11:46:43 AM] Connecting to the RIFF Box...OK
[6/6/2012 11:46:43 AM] Firmware Version: 1.32, JTAG Manager Version: 1.43
[6/6/2012 11:46:43 AM] Selected Resurrector: [ZTE S1602 V1.00]
[6/6/2012 11:46:43 AM]
[6/6/2012 11:46:43 AM] ERROR: Specified file cannot be found. Verify path.
[6/6/2012 11:46:43 AM] [FINISH OPERATION_ID = DIRECT_WRITE_MEMORY]

[6/6/2012 11:46:53 AM] [START OPERATION_ID = DIRECT_WRITE_MEMORY]
[6/6/2012 11:46:53 AM] Open serial port...OK
[6/6/2012 11:46:53 AM] Connecting to the RIFF Box...OK
[6/6/2012 11:46:53 AM] Firmware Version: 1.32, JTAG Manager Version: 1.43
[6/6/2012 11:46:53 AM] Selected Resurrector: [ZTE S1602 V1.00]
[6/6/2012 11:46:53 AM]
[6/6/2012 11:46:53 AM] Writting Target Memory...ERROR
[6/6/2012 11:46:53 AM] ERROR: Wrong response from the RIFF Box.
[6/6/2012 11:46:53 AM] [FINISH OPERATION_ID = DIRECT_WRITE_MEMORY]

[6/6/2012 11:47:02 AM] [START OPERATION_ID = DCC_WRITE_MEMORY]
[6/6/2012 11:47:02 AM]
[6/6/2012 11:47:02 AM] Current Settings:
[6/6/2012 11:47:02 AM] -----------------
[6/6/2012 11:47:02 AM] Address: 000000000000
[6/6/2012 11:47:02 AM] Length: 000000800000
[6/6/2012 11:47:02 AM] Address Space: ROM1
[6/6/2012 11:47:02 AM] AutoFullFlash: CHECKED
[6/6/2012 11:47:02 AM] Use End Address: UNCHECKED
[6/6/2012 11:47:02 AM] ECC Module Enabled: UNCHECKED
[6/6/2012 11:47:02 AM] Image File is Used: UNCHECKED
[6/6/2012 11:47:02 AM] Use Address as Offset: CHECKED
[6/6/2012 11:47:02 AM] Main (CHECKED): D:\JTAG\flash file\1602 8 MB UNLOCK CHINA TELECOM\1602 8 MB UNLOCK CHINA TELECOM\1602 8 MB UNLOCK CHINA TELECOM.bin
[6/6/2012 11:47:02 AM] Redu (UNCHECKED):
[6/6/2012 11:47:02 AM]
[6/6/2012 11:50:18 AM] Open serial port...OK
[6/6/2012 11:50:18 AM] Connecting to the RIFF Box...OK
[6/6/2012 11:50:18 AM] Firmware Version: 1.32, JTAG Manager Version: 1.43
[6/6/2012 11:50:18 AM] Selected Resurrector: [ZTE S1602 V1.00]
[6/6/2012 11:50:18 AM]
[6/6/2012 11:50:18 AM] Connecting to the dead body...OK
[6/6/2012 11:50:18 AM] Detected dead body ID: 0x122CE0E1 - IGNORED!
[6/6/2012 11:50:18 AM] Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
[6/6/2012 11:50:18 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[6/6/2012 11:50:18 AM] Settings Code: 0x26010000000000000000000000800000
[6/6/2012 11:50:18 AM]
[6/6/2012 11:50:18 AM] Resurrection sequence started.
[6/6/2012 11:50:18 AM] Establish communication with the phone...OK
[6/6/2012 11:50:18 AM] Initializing internal hardware configuration...OK
[6/6/2012 11:50:18 AM] Uploading resurrector data into memory...OK
[6/6/2012 11:50:18 AM] Starting communication with resurrector...OK
[6/6/2012 11:50:18 AM]
[6/6/2012 11:50:18 AM] Detected an Initialized FLASH1 Chip, ID: 0x0020/0x88C0 (8MB)
Writting FLASH1 memory from 0x000000000000 to 0x0000007FFFFF
Completed in 00:03:15.516 (Average Transfer Rate: 41.90 kB/s)
[FINISH OPERATION_ID = DCC_WRITE_MEMORY]
------------------------------- JTAG Manager Session Closed -------------------------------

[M0YAL]

Hi,

Write This One & Post Resoult

s1602 8 mb new unlock.rar - 4shared.com - online file sharing and storage - download - Mohd Aslam