zte s165 dead after flash with infinity - GSM-Forum

appukumar · 07-09-2012, 07:22

zte s165 dead after flash with infinity
when i fry to flash or resurrection this errer show plz help.i select zte s165
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [ZTE S165 V1.0.4609.43971]

Connecting to the dead body...OK
Detected dead body ID: 0x122C80E1 - WRONG!!!
ERROR: Current ID does not belong to the ZTE S165 family.

M0YAL · 07-09-2012, 07:30

To disable Target ID do the following:

-> Box Service -> Advanced Settings -> Tick "Ignore TARGET IDCODE

& Try Again

ravi.choudhary · 07-09-2012, 08:42

thanks

i solve my problem by this
To disable Target ID do the following:

-> Box Service -> Advanced Settings -> Tick "Ignore TARGET IDCNICE

NICE SOLUTION BRO

LILA SHANKAR · 07-28-2012, 14:28

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.33, JTAG Manager Version: 1.44
Selected Resurrector: [ZTE S165 V1.0.4609.43971]

Connecting to the dead body...OK
Detected dead body ID: 0x122C80E1 - IGNORED!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0001/0x007E (8MB)
WARNING: No Data for the current NOR Chip. Selected default Data for the NOR Chip with IDs: 0x0020/0x88C0

Flashing the dead body...OK
Resurrection complete!

indiaravi · 11-20-2012, 17:32

Quote:

Originally Posted by m0yal

to disable target id do the following:

-> box service -> advanced settings -> tick "ignore target idcode

& try again

..
Thanks............................................ .........

drakshamobile · 01-19-2013, 08:25

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [ZTE S165 V1.0.4609.43971]

Connecting to the dead body...OK
Detected dead body ID: 0x122C80E1 - IGNORED!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0001/0x007E (8MB)
WARNING: No Data for the current NOR Chip. Selected default Data for the NOR Chip with IDs: 0x0020/0x88C0

Flashing the dead body...

.::TEJARAM::. · 01-19-2013, 08:38

Thank You For This Useful Post

wbr ; tejaram

rahulperfect123 · 04-03-2013, 15:47

Quote:

Originally Posted by M0YAL

To disable Target ID do the following:

-> Box Service -> Advanced Settings -> Tick "Ignore TARGET IDCODE

& Try Again

flashing done but phone is dead....same file is working on other phone....what to do now...????.........

cellcare prasad · 04-03-2013, 15:51

Bro flash with 8mb ztes165 unlock file ur problem will solve

durgesh4rbl · 04-28-2013, 08:12

Quote:

Originally Posted by M0YAL

To disable Target ID do the following:

-> Box Service -> Advanced Settings -> Tick "Ignore TARGET IDCODE

& Try Again

sir
ji resurrtection is complete but my set is dead

when write full dump say error plz guide me senior sir

Uploaded with ImageShack.us

Uploaded with ImageShack.us

durgesh4rbl · 04-28-2013, 13:04

plz give any new salution

durgesh4rbl · 04-30-2013, 19:06

any salution ............................

M0YAL · 05-01-2013, 11:23

Quote:

Originally Posted by durgesh4rbl

sir
ji resurrtection is complete but my set is dead

when write full dump say error plz guide me senior sir

Uploaded with ImageShack.us

Uploaded with ImageShack.us

UNclick Use Address As Offset For Flash FIle

rajendrakuma · 03-09-2014, 12:46

plz help me

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [ZTE S165 V1.0.4609.43971]

Connecting to the dead body...
ERROR: Set I/O Voltage to 1.80V failed. Real reading is 2.15V

active_care · 05-09-2014, 12:50

07-09-2012, 07:22	#1 (permalink)
appukumar No Life Poster Join Date: Apr 2008 Location: MX-KEY is the BEST NOKIA TOOL. Age: 39 Posts: 591 Member: 747537 Status: Offline Thanks Meter: 39	zte s165 dead after flash with infinity zte s165 dead after flash with infinity when i fry to flash or resurrection this errer show plz help.i select zte s165 Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.32, JTAG Manager Version: 1.43 Selected Resurrector: [ZTE S165 V1.0.4609.43971] Connecting to the dead body...OK Detected dead body ID: 0x122C80E1 - WRONG!!! ERROR: Current ID does not belong to the ZTE S165 family.

01-19-2013, 08:25	#6 (permalink)
drakshamobile Crazy Poster Join Date: Oct 2010 Location: patna bihar Posts: 57 Member: 1423506 Status: Offline Thanks Meter: 31	riff solution s165 Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.32, JTAG Manager Version: 1.43 Selected Resurrector: [ZTE S165 V1.0.4609.43971] Connecting to the dead body...OK Detected dead body ID: 0x122C80E1 - IGNORED! Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0001/0x007E (8MB) WARNING: No Data for the current NOR Chip. Selected default Data for the NOR Chip with IDs: 0x0020/0x88C0 Flashing the dead body...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
5110 flash new software , need help	steve	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	01-03-2015 05:41
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29
Netmonitor with FBus????	ratzfatz	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	06-09-1999 17:04

07-09-2012, 07:30	#2 (permalink)
M0YAL No Life Poster Join Date: May 2011 Location: india Posts: 1,679 Member: 1583254 Status: Offline Sonork: 100.1602320 Thanks Meter: 4,792	To disable Target ID do the following: -> Box Service -> Advanced Settings -> Tick "Ignore TARGET IDCODE & Try Again

07-09-2012, 08:42	#3 (permalink)
ravi.choudhary Junior Member Join Date: Jun 2009 Posts: 28 Member: 1060672 Status: Offline Thanks Meter: 10	thanks i solve my problem by this To disable Target ID do the following: -> Box Service -> Advanced Settings -> Tick "Ignore TARGET IDCNICE NICE SOLUTION BRO

07-28-2012, 14:28	#4 (permalink)
LILA SHANKAR No Life Poster Join Date: Sep 2007 Location: rajasthan Posts: 701 Member: 597610 Status: Offline Thanks Meter: 50	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.33, JTAG Manager Version: 1.44 Selected Resurrector: [ZTE S165 V1.0.4609.43971] Connecting to the dead body...OK Detected dead body ID: 0x122C80E1 - IGNORED! Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0001/0x007E (8MB) WARNING: No Data for the current NOR Chip. Selected default Data for the NOR Chip with IDs: 0x0020/0x88C0 Flashing the dead body...OK Resurrection complete!

01-19-2013, 08:38	#7 (permalink)
.::TEJARAM::. No Life Poster Join Date: Nov 2011 Location: .::INDIA::. Age: 35 Posts: 3,459 Member: 1681461 Status: Offline Sonork: [OFFLINE] Thanks Meter: 1,011	Thank You For This Useful Post wbr ; tejaram

04-03-2013, 15:51	#9 (permalink)
cellcare prasad No Life Poster Join Date: Oct 2007 Location: VIZAG,A.P, INDIA Posts: 2,044 Member: 602547 Status: Offline Sonork: 100.1621466 Thanks Meter: 930	Bro flash with 8mb ztes165 unlock file ur problem will solve

04-28-2013, 13:04	#11 (permalink)
durgesh4rbl No Life Poster Join Date: Feb 2011 Location: LALGANJ RAEBARELI Posts: 518 Member: 1525102 Status: Offline Sonork: 100.1626123 Thanks Meter: 159	plz give any new salution

04-30-2013, 19:06	#12 (permalink)
durgesh4rbl No Life Poster Join Date: Feb 2011 Location: LALGANJ RAEBARELI Posts: 518 Member: 1525102 Status: Offline Sonork: 100.1626123 Thanks Meter: 159	any salution ............................

03-09-2014, 12:46	#14 (permalink)
rajendrakuma Insane Poster Join Date: Feb 2009 Location: jaipur Posts: 64 Member: 981048 Status: Offline Thanks Meter: 7	plz help me Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.55 Selected Resurrector: [ZTE S165 V1.0.4609.43971] Connecting to the dead body... ERROR: Set I/O Voltage to 1.80V failed. Real reading is 2.15V

05-09-2014, 12:50	#15 (permalink)
active_care Freak Poster Join Date: May 2012 Location: india \westbengal / katwa Age: 37 Posts: 352 Member: 1762926 Status: Offline Sonork: 1619564 Thanks Meter: 83