5230 dead after flash - GSM-Forum

Boukra · 07-14-2014, 16:21

Hi,
please i need you help to revive this 5230 RM-588 :
i received the phone to change in arabic langage but when i terminated the process the phone is dead ...and some times is blinkin white
I reflashed it but without success
this is the log :

Code:

Connect phone on selected interface...

Core : v1.92 , BB5XG FlashEngine : v9.9

Selected FlashSettings : Cold Flash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : RM-588_21.0.004_prd.core.C00
PPM2 : RM-588_21.0.004_C02_prd.rofs3.fpsx
Flashing phone now...
[Gen] Rules accepted for : RAPIDO Generation
Check files done...
-> SWversion check skipped : Dead mode selected
- > Force ColdFlash mode
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID:       000000010000022600010006400C192101051103
CPU ID :       RAPIDOv11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00000296
EM1 ID:        00000B22
PUBLIC ID:     03B00013BEA0005208BB5529FB65727A4404ED24
ASIC MODE ID:  00
ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
ROM ID:        4B9B75103E691FF8
Use URAPIDOv11_2nd.fg  ,  Rev : 2.0  Ver : 12.8.0 
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use URAPIDOv11_XSR17_alg.fg  ,  Rev : 2.0  Ver : 12.8.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:00 
Reopening the connection...
CFL: Wait for Loader take control  ...
CFL: Check mode
Phone ready, boot Ok
TransReq set Ok
PAPUBkeys : 7DC72D3FDC552426A4479BC820097D304CFB6C15


CFL: phone is in flash mode

 === SW Version Check === 
- > REFLASHING
 === SW Version Check === 

   ===Flashing [MCU]===
Erase : Processing RM-588_21.0.004_prd.core.C00
Partitioning....
Partitioning Ok...
Erasing....
Erasing Data....
Erase area : 0x00040000 - 0x00082FFF , CMT , NAND
Erase area : 0x00083400 - 0x003FFFFF , CMT , NAND
Erase area : 0x00800000 - 0x00D5FFFF , CMT , NAND
Erase area : 0x00D60000 - 0x09E5FFFF , CMT , NAND
Erase Partition
Partition 0x0A
Erase Ok...
TIME : Erase time : 00:00:01 
CFL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

Write : Processing RM-588_21.0.004_prd.core.C00
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 421 blocks
TIME : Write time : 00:01:31 
MCU Write done
CFL: Request programm status
NAND status : 00000001 / 00000001 / 00000000


   ===Flashing [PPM2]===
Erase : Processing RM-588_21.0.004_C02_prd.rofs3.fpsx
Erasing....
Erasing Data....
Erase area : 0x09160000 - 0x09E5FFFF , CMT , NAND
Erase Ok...
TIME : Erase time : 00:00:00 
CFL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

Write : Processing RM-588_21.0.004_C02_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 27 blocks
TIME : Write time : 00:00:05 
PPM Write done
CFL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

CFL: Close_Session
Content: 000300000000010000000100000000
CFL: Reboot

Flashing done!
Total flash time : 00:01:38
Reboot phone now...

Reading Phone Info....
Connected phone -   Nokia 5230
Software Info:     V ICPR72_10w21 26-05-10 RM-588 (c) Nokia
IMEI:  354336049991219
Ape Version: V 21.0.004
Product code:  05999B7
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
ProductTuneSet...OK!
SwUpgradeSet...OK!
Battery voltage is enough for start
Set phone to Normal mode...

AfterFlash operations done ;D
Done!

Elapsed: 00:02:14
Connect phone on selected interface...

BR

Dzirt · 07-14-2014, 17:10

Check battery and BSI. It ok by log.

Boukra · 07-14-2014, 18:21

Yes,Mr.Dzirt that is my problem,all is OK but the phone dont respnd!!!
i used another battery and apply diretly the power from another box(Volcano + and -) but still nothing !!
what about BSI ? how can i test it?
BR

Dzirt · 07-15-2014, 05:28

Only original battery. BSI can be broken - White screen and couple other bugs. More in HW section.

07-14-2014, 17:10	#2 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	Check battery and BSI. It ok by log.

07-14-2014, 18:21	#3 (permalink)
Boukra Freak Poster Join Date: Sep 2005 Location: Mrocco Posts: 335 Member: 184161 Status: Offline Thanks Meter: 22	Yes,Mr.Dzirt that is my problem,all is OK but the phone dont respnd!!! i used another battery and apply diretly the power from another box(Volcano + and -) but still nothing !! what about BSI ? how can i test it? BR

07-15-2014, 05:28	#4 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	Only original battery. BSI can be broken - White screen and couple other bugs. More in HW section.