E5-00 RM-632 strange problem - GSM-Forum

Dilip_Nath · 06-28-2012, 10:36

The problem was before flashing
Nokia then off

I flash the phone.

Flashing Log

Code:

card found: S/N 
registered to: Dilip_Nath

Connect phone on selected interface...

Core : v1.47 , FlashEngine : v1.5

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm632_091.001_prd.core.fpsx
PPM : rm632_091.001_47.01_India_prd.rofs2.fpsx
PPM2 : rm632_091.001_C00.01_DEFAULT_prd.rofs3.fpsx
CNT : rm632_091.001_U005.000_prd.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00000C35
EM1 ID:        00000C30
PUBLIC ID:     10300012C4A403443B41AD9E37A1BC60D324F741
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing RAWLOADER...
FLIC : 005000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:03 
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : CCD9F80559BA50D9B3E274F9E7120BE1EE4EEA7C
ADL: phone is in flash mode
   ===Flashing [MCU]===
Erase : Processing rm632_091.001_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01 
Write : Processing rm632_091.001_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 436 blocks
TIME : Write time : 00:00:41 
MCU Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

   ===Flashing [PPM]===
Erase : Processing rm632_091.001_47.01_India_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing rm632_091.001_47.01_India_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 182 blocks
TIME : Write time : 00:00:20 
PPM Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

   ===Flashing [PPM2]===
Erase : Processing rm632_091.001_C00.01_DEFAULT_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing rm632_091.001_C00.01_DEFAULT_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 35 blocks
TIME : Write time : 00:00:03 
PPM Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

   ===Flashing [CNT]===
Erase : Processing rm632_091.001_U005.000_prd.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01 
Write : Processing rm632_091.001_U005.000_prd.uda.fpsx
Total writen 97 blocks
TIME : Write time : 00:00:11 
CNT Write done
ADL: Request programm status
NAND status : 00000006 / 00000006 / 00000000

ADL: Close_Session
Content: 000300000000060000000600000000
ADL: Reboot

Flashing done!
Total flash time : 00:01:20
Reboot phone now...

Reading Phone Info....
Connected phone -   Nokia E5-00
Software Info:     V ICPR82_11w16.3.10 13-03-12 RM-632 (c) Nokia
IMEI:  354859041095630
Ape Version: 091.001
Product code:  059H8N4
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
ProductTuneSet...OK!
SwUpgradeSet...OK!
Product code update...
Set phone to Normal mode...

AfterFlash operations done ;D
Done!

Elapsed: 00:03:09
Connect phone on selected interface...

After flashing no power, vibrate only.

Any suggestion.

wbr
Dilip

ali5noor · 06-28-2012, 11:55

flash it with the latest software file

Br

Mohsin-* · 06-28-2012, 12:08

Hello

Post here Self TEST logs ,as i able see phone is in Local mode

Dilip_Nath · 06-28-2012, 14:36

Quote:

Originally Posted by Mohsin-*

Hello

Post here Self TEST logs ,as i able see phone is in Local mode

Self Test Log

Code:

Initializing Tests...
IMEI : 354859041095630 , Phone : RM-632 Nokia E5-00
Get keys...
PASSED | ST_SLEEP_X_LOOP_TEST
PASSED | ST_UEM_CBUS_IF_TEST
PASSED | ST_EAR_DATA_LOOP_TEST
PASSED | ST_SIM_CLK_LOOP_TEST
PASSED | ST_SIM_LOCK_TEST
PASSED | ST_SECURITY_TEST
PASSED | ST_PWR_KEY_TEST
PASSED | ST_CURRENT_CONS_TEST
PASSED | ST_HOOKINT_TEST
PASSED | ST_BTEMP_TEST
PASSED | ST_MBUS_RX_TX_LOOP_TEST
PASSED | ST_KELVIN_BATVOLTAGE_TEST
PASSED | ST_KELVIN_VIBRA_TEST
PASSED | ST_KELVIN_CAPACITOR_TEST
PASSED | ST_KELVIN_MISC_TEST
PASSED | ST_KELVIN_AUDIO_TEST
PASSED | ST_KELVIN_XEAR_TEST
PASSED | ST_AMB_LIGHT_SENSOR_TEST
PASSED | ST_USB_CHARGING_TEST
PASSED | ST_IIC_TEST
PASSED | ST_DIGIMIC_TEST
->ERROR | ST_RAM_IF_TEST
PASSED | ST_LED_CONTROLLER_TEST
PASSED | ST_CDSP_SLEEPCLOCK_FREQ_TEST
PASSED | ST_CDSP_RF_BB_IF_TEST
PASSED | ST_CDSP_RF_SUPPLY_TEST
PASSED | ST_CDSP_TX_IQ_TEST
PASSED | ST_CDSP_TXC_DATA_TEST
PASSED | ST_CDSP_RX_PLL_PHASE_LOCK_TEST
NOT RUN | ST_CDSP_TX_PLL_PHASE_LOCK_TEST
NOT RUN | ST_CDSP_WCDMA_TX_POWER_TEST
NOT RUN | ST_CDSP_RX_IQ_LOOP_BACK_TEST
NOT RUN | ST_CDSP_GSM_TX_POWER_TEST
PASSED | ST_KEYBOARD_STUCK_TEST
PASSED | ST_LPRF_IF_TEST
PASSED | ST_CAMERA_IF_TEST
PASSED | ST_LED_FLASH_TEST
PASSED | ST_LPRF_AUDIO_LINES_TEST
PASSED | ST_MAIN_LCD_IF_TEST
PASSED | ST_BT_WAKEUP_TEST
PASSED | ST_WLAN_TEST
PASSED | ST_BT_WLAN_COEXISTENCE_TEST
NOT RUN | ST_USB_LOOP_TEST
PASSED | ST_RADIO_TEST
PASSED | ST_LED_FLASH_IF_TEST
SelfTests end

Plz identify my fault.

wbr
Dilip

...:::::NP™:::::... · 06-28-2012, 14:40

@ Dear Mohsin

He Told Me ( Dlip_Nath) Here Set When it With UFS+Best Set Gone Local Mode & Test Also Showing info But Normal Mode Not Work.

Need Best & Working Suggestion.

Dilip_Nath · 06-28-2012, 14:42

Quote:

Originally Posted by ali5noor

flash it with the latest software file

Br

Brother its latest firmware and I also flash it with matching product code.

Dzirt · 06-29-2012, 03:58

Hello.
RAM_IF test show fault, seems it was water damaged.
Did you open phone?

Dilip_Nath · 07-01-2012, 05:14

Thanks everybody for response.

My problem solved by hardware.

Just Remove camera then everything works fine.

wbr
Dilip

chris_ua · 09-19-2012, 14:32

Quote:

Originally Posted by Dilip_Nath

Thanks everybody for response.

My problem solved by hardware.

Just Remove camera then everything works fine.

wbr
Dilip

Helped me alot.
Thanks.

**Qaisar Mahmood** · 09-19-2012, 14:56

@Dilip_Nath

I am happy to See Ur Problem Solved

BR
Qaisar Mahmood

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Sim card sleep mode problem with 6130	ratzfatz	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	4	05-22-2012 11:13
GId1 problem	old_man	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	1	10-18-2006 15:21
6110 5.47 sw unlock problem	gsms	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	3	11-21-1999 18:43
6150 Lock Problem	Zeljko	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	1	09-11-1999 17:39
HELP: Problem with 5110	Xabi	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	1	07-16-1999 00:44

06-28-2012, 11:55	#2 (permalink)
ali5noor Freak Poster Join Date: Jan 2011 Location: World Posts: 323 Member: 1503321 Status: Offline Thanks: 22 Thanked 37 Times in 27 Posts	flash it with the latest software file Br

06-28-2012, 12:08	#3 (permalink)
Mohsin-* Moderator Join Date: Dec 2006 Location: Pakistan " Karachi " and Dubai Posts: 6,716 Member: 417298 Status: Offline Sonork: 100.1578269 Thanks: 208 Thanked 17,529 Times in 1,869 Posts	Hello Post here Self TEST logs ,as i able see phone is in Local mode

06-28-2012, 14:40	#5 (permalink)
...:::::NP™:::::... Product Supporter Join Date: Nov 2009 Location: Bangladesh Age: 30 Posts: 4,082 Member: 1162626 Status: Offline Sonork: 100.1591727 Thanks: 2,867 Thanked 5,153 Times in 1,867 Posts	@ Dear Mohsin He Told Me ( Dlip_Nath) Here Set When it With UFS+Best Set Gone Local Mode & Test Also Showing info But Normal Mode Not Work. Need Best & Working Suggestion.

06-29-2012, 03:58	#7 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Russia , Syberia Age: 23 Posts: 6,292 Member: 1157320 Status: Offline Sonork: 100.1616907 Thanks: 4,102 Thanked 3,412 Times in 1,452 Posts	Hello. RAM_IF test show fault, seems it was water damaged. Did you open phone?

07-01-2012, 05:14	#8 (permalink)
Dilip_Nath No Life Poster Join Date: Nov 2006 Location: Bangladesh Posts: 956 Member: 387110 Status: Offline Sonork: 100.1590892 Thanks: 109 Thanked 265 Times in 178 Posts	Thanks everybody for response. My problem solved by hardware. Just Remove camera then everything works fine. wbr Dilip

09-19-2012, 14:56	#10 (permalink)
Qaisar Mahmood Product Manager Join Date: Jan 2006 Location: QAISAR TELECOM SAMUNDRI FSD PK Posts: 13,158 Member: 226457 Status: Online Sonork: 100.1604561 Thanks: 1,081 Thanked 10,666 Times in 2,146 Posts	@Dilip_Nath I am happy to See Ur Problem Solved BR Qaisar Mahmood