flashing nokia 7230

[esQmo]

Originally Posted by sirnavid2010

Nokia 7230 rm604 flash done by best 1.15


Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm598__09.83.mcusw
PPM : rm598__09.83.ppm_meac
CNT : rm598__09.83.image_meac_059B1W5_002
Flashing phone now...
Check files done...
-> Check SW version...
FlashFile version : 09.83
Phone version : 09.83 21-09-10 RM-604 (c) Nokia
-> Check SW version : Reflash
Backup CRT308 data...
CRT308 Backup Created...
Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Gathering phone info...
Check communication with phone...
Reboot....
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600000001020C192102044100
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 24400206DDB35540A28ACBA9F15F3C3580B7547F
ASIC MODE ID: 00
ROOT KEY HASH: 7B045400E1752022F9EB80B0DEA9C65D
ROM ID: 67E82268F29CEA60
Use RAP3Gv40_2nd.fg , Rev : 3.0 Ver : 10.50.0
Processing RAWLOADER...
FLIC : 00300098
Req : XSR 1.6
Use RAP3Gv40_XSR17_alg.fg , Rev : 3.0 Ver : 10.50.0
Boot Done!
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 355365042571339
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : F:\BEST-INFINITY\Backup\Cert\355365042571339.rpl

===Flashing [MCU]===
Erase : Processing rm598__09.83.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm598__09.83.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 135 blocks
TIME : Write time : 00:00:37
MCU Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [PPM]===
Erase : Processing rm598__09.83.ppm_meac
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm598__09.83.ppm_meac
Total writen 22 blocks
TIME : Write time : 00:00:07
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [CNT]===
Erase : Processing rm598__09.83.image_meac_059B1W5_002
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02
Write : Processing rm598__09.83.image_meac_059B1W5_002
Total writen 53 blocks
TIME : Write time : 00:00:17
CNT Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot

Flashing done!
Total flash time : 00:01:06
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 7230
Software Info: V 09.83 21-09-10 RM-604 (c) Nokia
IMEI: 355365042571339
PPM version : V 09.83 21-09-10 RM-598 (c) Nokia MEC
Product code: 0590660
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Checking User Certificates...
Total - 34 certs
Data exist, skip certificate repair...
Set phone to Normal mode...
AfterFlash operations done...
Done!

Elapsed: 00:01:32
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Phone disconected!

Connect phone on selected interface...

here's my log:

Connect phone on selected interface...

Core : v1.51 , FlashEngine : v1.8

Selected FlashSettings :
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm598__10.82.mcusw
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000010000022600000001020C192102044100
CPU ID : RAP3Gv4 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 0F000315E90300499BFF2A0E7CBBB5ADDE078031
ASIC MODE ID: 00
ROOT KEY HASH: 7B045400E1752022F9EB80B0DEA9C65D
ROM ID: 67E82268F29CEA60
Use RAP3Gv40_2nd.fg , Rev : 3.0 Ver : 12.8.0
Processing RAWLOADER...
FLIC : 00300098
Req : XSR 1.6
Use RAP3Gv40_XSR17_alg.fg , Rev : 3.0 Ver : 12.8.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:05
Reopening the connection...
Waiting for response: 30
ADL: Check mode
ADL: phone is in flash mode
===Flashing [MCU]===
Erase : Processing rm598__10.82.mcusw
Partitioning....
Partitioning error! Phone Not respond!

Connect phone on selected interface...


Any help

[InfinityHelp]

@esQmo
If you want to get support and answers - buy [BEST] Dongle here: Infinity-Box - How to buy