to infinity best team about most wanted nokia xgold error

[Ismail khan1978]

infinity team this was what ever when nokia xgold gives error in the middle
then no tool to revive this phones

but onlay mxbox has the sulution

one thing these logs are not to compare you with some other tool
best is the best
these logs to show you to fix this error

please please please check

here is logs when best gives error

Connect phone on selected interface...

Core : v2.23 , BB5XG FlashEngine : v10.1

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm872__04.52.mcusw
PPM : rm872__04.52.ppm_m2
CNT : rm872__04.52.image_m2_059Q4J7
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len : 0x0A
IF xCPUID : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data : 1FB300020303010100FF

Sending EBL Loader ...
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ...
EBL sent Ok
EBL : Quantum_Bootloader_10.53_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 356324052112343
IMEI 2 : 356324052112350
PCcode : 059Q8L5

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\356324052112343_XG 213_CRT.rpl

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

===Flashing [MCU]===
File : rm872__04.52.mcusw
Image : rm872__04.52.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:01
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:01
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ...
Erase done, time : 00:00:06
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01800000
Erasing, wait ...
Erase done, time : 00:01:45
Write , Start : 0x40280000 , Len : 0x01800000
Flashing , wait ...
Region flash done, time : 00:00:32
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
[ERR_hReqFlashEraseStart] : 8201410040000000
Error...
-> Check cable, flashfile, try again from this file

Connect phone on selected interface...


Elapsed: 00:02:38
Connect phone on selected interface...

and here is mxbox success same set

MXKEY [FT SCR2000 0], SN: C087289A
Using device: USB ROM
Connection status: UHCI:HUB:HUB::USB 1.10 (Full-speed)
Driver: NMWCD, ver: 7.1.32.117
Module ver: 1.0.0.21762(03-12-2014), Library ver: 1.0.0.14473(03-12-2014)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device synchronized.
CPU: XGOLD 213
Using embedded SBL from MCU.
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.53
EBL version: Quantum_Bootloader_10.53_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 0089 8982 - 23280001 [Intel NU48F512,512 Mbits]
CFI information:
Flash settings: 0/1024, size: 0x04000000
1 Block regions:
512 x 0x00020000 = 0x04000000
EBL ready !
Original IMEI: 35632405211234
RPL backup already exist (C:\mobileEx_1\3.5\data\backup\XGOLD_3563240521123 4_back.RPL)
Processing file: rm872__04.52.mcusw
Downloading item CODE:rm872__04.52.mcusw_ebl_psi.fls, num block: 4, size: 25.25 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.654 s
Erasing area 0x40040000-0x4005FFFE ...OK
Programming completed in 0.682 s
Erasing area 0x40060000-0x4015FFFE ...OK
Programming completed in 5.287 s
Erasing area 0x40280000-0x41A7FFFE ...OK
Programming completed in 30.804 s
Checksum verified (0xFA4D)
Processing file: rm872__04.52.ppm_m2
Downloading item CUSTackage_m2.ppm_ebl_psi.fls, num block: 1, size: 3.78 MB
Erasing area 0x41A80000-0x41E468EE ...OK
Programming completed in 5.196 s
Checksum verified (0xC9E6)
Processing file: rm872__04.52.image_m2_059Q4J7
Downloading item CUSTackage_m2_059Q4J7.image.fls, num block: 1, size: 16.25 MB
Erasing area 0x42100000-0x43E1FFFE ...OK
Programming completed in 22.745 s
Checksum verified (0x5521)
Total time for flashing process(boot+erase+write) was 8 min 46.691 s
Waiting for USB device removal ...
Waiting for device boot up ...
Device connected: nmwcdc\Nokia X2-02 USB Phonet (), PORT_ID: 356324052112343
Verifying communication to device OK.



Phone type: RM-872 (206)
SW version: V 04.52 30-06-13 RM-872 (c) Nokia
Imei plain: 35632405211234-3
Product code: 059Q8L5
Language Pack:
- not available.

Imei net: 35632405211234
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 800000000004000B

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
FULL FACTORY... OK
USER DATA... OK
LEAVE FACTORY... OK
SERVICE CENTER... OK
SOFTWARE UPGRADE... OK
PRODUCTION TUNING... OK
Reset User Code (to default:12345) ... OK
Completed in 0.121 s
FULL FACTORY... OK
USER DATA... OK
LEAVE FACTORY... OK
SERVICE CENTER... OK
SOFTWARE UPGRADE... OK
PRODUCTION TUNING... OK
Reset User Code (to default:12345) ... OK
Completed in 0.345 s

[dany_boy]

many time face same problem realy headache for users..

i think need to add skip erasing option for xgold 213 phones.

[dany_boy]

Nokia C2 Slow Working Try to Flash But Failed. now set stuk on nokia. Plz Team give us something new for these chips to solve our problem.


Core : v2.23 , BB5XG FlashEngine : v10.1

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm704__03.45.mcusw
PPM : rm704__03.45.ppm_m_a
CNT : rm704__03.45.image_m_a_magenta_059C1L7
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len : 0x0A
IF xCPUID : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data : 1FB300020303010100FF

Sending EBL Loader ...
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ...
EBL sent Ok
EBL : Quantum_Bootloader_10.44_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 359063043152540
IMEI 2 : 359063043152557
PCcode : 059J2R1

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\359063043152540_2n d_XG213_CRT.rpl

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

===Flashing [MCU]===
File : rm704__03.45.mcusw
Image : rm704__03.45.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ...
Erase done, time : 00:00:06
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01940000
Erasing, wait ...
Erase done, time : 00:02:29
Write , Start : 0x40280000 , Len : 0x018C0000
Flashing , wait ...
Region flash done, time : 00:00:32
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ...
Erase done, time : 00:00:00
No write data, skip
CRC check passed , 0x98E4

===Flashing [PPM]===
File : rm704__03.45.ppm_m_a
Image : package_m_a.ppm_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41BC0000 , Len : 0x00600000
Erasing, wait ...
Erase done, time : 00:00:20
Write , Start : 0x41BC0000 , Len : 0x003459CC
Flashing , wait ...
Region flash done, time : 00:00:03
CRC check passed , 0x6F06

===Flashing [CNT]===
File : rm704__03.45.image_m_a_magenta_059C1L7
Image : package_m_a_magenta_059C1L7.image.fls
Sec-pack found, sending ...
Sec-pack sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x421C0000 , Len : 0x01C60000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x421C0000 , Len : 0x009E0000
Flashing , wait ...
Region flash error
[ERR_IfCheckResp] Result : 1C001E0201001B00

Error...
-> Check cable, flashfile, try again from this file

Connect phone on selected interface...


Elapsed: 00:04:15
Connect phone on selected interface...

[Ismail khan1978]

Originally Posted by dany_boy

Nokia C2 Slow Working Try to Flash But Failed. now set stuk on nokia. Plz Team give us something new for these chips to solve our problem.


Core : v2.23 , BB5XG FlashEngine : v10.1

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm704__03.45.mcusw
PPM : rm704__03.45.ppm_m_a
CNT : rm704__03.45.image_m_a_magenta_059C1L7
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len : 0x0A
IF xCPUID : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data : 1FB300020303010100FF

Sending EBL Loader ...
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ...
EBL sent Ok
EBL : Quantum_Bootloader_10.44_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 359063043152540
IMEI 2 : 359063043152557
PCcode : 059J2R1

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\359063043152540_2n d_XG213_CRT.rpl

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

===Flashing [MCU]===
File : rm704__03.45.mcusw
Image : rm704__03.45.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ...
Erase done, time : 00:00:06
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01940000
Erasing, wait ...
Erase done, time : 00:02:29
Write , Start : 0x40280000 , Len : 0x018C0000
Flashing , wait ...
Region flash done, time : 00:00:32
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ...
Erase done, time : 00:00:00
No write data, skip
CRC check passed , 0x98E4

===Flashing [PPM]===
File : rm704__03.45.ppm_m_a
Image : package_m_a.ppm_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41BC0000 , Len : 0x00600000
Erasing, wait ...
Erase done, time : 00:00:20
Write , Start : 0x41BC0000 , Len : 0x003459CC
Flashing , wait ...
Region flash done, time : 00:00:03
CRC check passed , 0x6F06

===Flashing [CNT]===
File : rm704__03.45.image_m_a_magenta_059C1L7
Image : package_m_a_magenta_059C1L7.image.fls
Sec-pack found, sending ...
Sec-pack sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x421C0000 , Len : 0x01C60000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x421C0000 , Len : 0x009E0000
Flashing , wait ...
Region flash error
[ERR_IfCheckResp] Result : 1C001E0201001B00

Error...
-> Check cable, flashfile, try again from this file

Connect phone on selected interface...


Elapsed: 00:04:15
Connect phone on selected interface...

now flash it with mxbox or key and your set will be ok 100%

[dany_boy]

Originally Posted by Ismail khan1978

now flash it with mxbox or key and your set will be ok 100%

thanks for ur suggestion but i put that dead project in dustbin.

i am sure infinity team can slove my problem . and other users problem who facing problem in xgold 213 chips .

[dany_boy]

still get no reply from team

[JayDi]

1. I don't get for 4 years any such phone.
2. During 4 years No one user send/sold me such phone.
3. I can't do anything without phone.

[dany_boy]

Originally Posted by JayDi

1. I don't get for 4 years any such phone.
2. During 4 years No one user send/sold me such phone.
3. I can't do anything without phone.

is a way to send a sample for u?

[JayDi]

If you can send it to Russia - then we add it.
Need untouched phone with other sw, which make such problem during flashing.

[Nasir Mobiles]

yes this is an issue with some phones if they failed while flashing.
only for that purpose I still using Universal Box (a dead project) and stick my one pc with 32bit strange.

no need for phone from us.
you can make it yourself just flash any xgold and while process interrupt. maybe not at 1st attempt but I am sure you will have that phone in hands

[M.AKHTER]

yes many time face problem in nokia 206 and nokiaa 110 ...many time solved with mxbox but problem is that now mxbox close there project completly

[somratjisan]

I return to customer after many try



Connect phone on selected interface...

Core : v2.23 , BB5XG FlashEngine : v10.1

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm827__03.47.mcusw
PPM : rm827__03.47.ppm_s2
CNT : rm827__03.47.image_s2_059N296
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len : 0x0A
IF xCPUID : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data : 1FB300020503010100FF

Sending EBL Loader ...
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ...
EBL sent Ok
EBL : Quantum_Bootloader_10.49_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 351970057353848
IMEI 2 : 351970057353855
PCcode : 059P7V5

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\351970057353848_2n d_XG213_CRT.rpl

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

===Flashing [MCU]===
File : rm827__03.47.mcusw
Image : rm827__03.47.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
[ERR_hReqFlashEraseStart] : 8201410040000000
Error...
-> Check cable, flashfile, try again from this file

Connect phone on selected interface...


Elapsed: 00:00:24
Connect phone on selected interface...

[Ismail khan1978]

one more 110 rm-827 dead

customer gave me on set and in the middle set is dead
thanks to Allah that i have one dead project hahhaha

if some one has no such dead project then there will be some fighting shyting
i think mr.JayDi can understand me

Connect phone on selected interface...

Core : v2.23 , BB5XG FlashEngine : v10.1

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm827__03.51.mcusw
PPM : rm827__03.51.ppm_m2
CNT : rm827__03.51.image_m2_059N2R0
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len : 0x0A
IF xCPUID : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data : 1FB300020303010100FF

Sending EBL Loader ...
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ...
EBL sent Ok
EBL : Quantum_Bootloader_10.49_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 351970054235600
IMEI 2 : 351970054235618
PCcode : 059N2R0

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\351970054235600_XG 213_CRT.rpl

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

===Flashing [MCU]===
File : rm827__03.51.mcusw
Image : rm827__03.51.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ...
Erase done, time : 00:00:05
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01940000
Erasing, wait ...
Erase done, time : 00:02:01
Write , Start : 0x40280000 , Len : 0x018C0000
Flashing , wait ...
Region flash error
Region flash error, connection lost! Check cable/battery!
Error...
-> Check cable, flashfile, try again from this file

Connect phone on selected interface...


Elapsed: 00:02:55
Connect phone on selected interface...

and sucessesfully done with mxkey

MXKEY [FT SCR2000 0], SN: C087289A
Using device: USB ROM
Connection status: UHCI:HUB:HUB::USB 1.10 (Full-speed)
Driver: NMWCD, ver: 7.1.32.117
Module ver: 1.0.0.21762(03-12-2014), Library ver: 1.0.0.14473(03-12-2014)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device synchronized.
CPU: XGOLD 213
Using embedded SBL from MCU.
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.49
EBL version: Quantum_Bootloader_10.49_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 0089 8982 - 23280001 [Intel NU48F512,512 Mbits]
CFI information:
Flash settings: 0/1024, size: 0x04000000
1 Block regions:
512 x 0x00020000 = 0x04000000
EBL ready !
Original IMEI: 35197005423560
IMEI_DATA saved OK
CCC_DATA saved OK
HWC_DATA saved OK
RPL saved to "C:\mobileEx_1\3.5\data\backup\XGOLD_3519700542356 0_back.RPL"
Processing file: rm827__03.51.mcusw
Downloading item CODE:rm827__03.51.mcusw_ebl_psi.fls, num block: 4, size: 26 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.363 s
Erasing area 0x40040000-0x4005FFFE ...OK
Programming completed in 0.342 s
Erasing area 0x40060000-0x4015FFFE ...OK
Programming completed in 1.443 s
Erasing area 0x40280000-0x41B3FFFE ...OK
Programming completed in 35.167 s
Checksum verified (0xA3D6)
Processing file: rm827__03.51.ppm_m2
Downloading item CUSTackage_m2.ppm_ebl_psi.fls, num block: 1, size: 3.06 MB
Erasing area 0x41BC0000-0x41ECF746 ...OK
Programming completed in 4.438 s
Checksum verified (0x4605)
Processing file: rm827__03.51.image_m2_059N2R0
Downloading item CUSTackage_m2_059N2R0.image.fls, num block: 1, size: 15.13 MB
Erasing area 0x421C0000-0x43E1FFFE ...OK
Programming completed in 23.004 s
Checksum verified (0x2091)
Total time for flashing process(boot+erase+write) was 8 min 46.741 s
Waiting for USB device removal ...
Waiting for device boot up ...
Device connected: nmwcdc\Nokia C2-00 USB Phonet (), PORT_ID: 38C32233
Verifying communication to device OK.



Phone type: RM-827 (Nokia 110)
SW version: V 03.51 06-08-13 RM-827 (c) Nokia
Imei plain: 35197005423560-0
Product code: 059N2R0
Language Pack:
- not available.

Imei net: 35197005423560
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 800000000004000B

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
FULL FACTORY... OK
USER DATA... OK
LEAVE FACTORY... OK
SERVICE CENTER... OK
SOFTWARE UPGRADE... OK
PRODUCTION TUNING... OK
Reset User Code (to default:12345) ... OK
Completed in 0.093 s
FULL FACTORY... OK
USER DATA... OK
LEAVE FACTORY... OK
SERVICE CENTER... OK
SOFTWARE UPGRADE... OK
PRODUCTION TUNING... OK
Reset User Code (to default:12345) ... OK
Completed in 0.519 s

[Ismail khan1978]

Originally Posted by JayDi

1. I don't get for 4 years any such phone.
2. During 4 years No one user send/sold me such phone.
3. I can't do anything without phone.

brother jady do some tricks

connect nokia 206 or 110 set with best and when it reaches here

Erase , Start : 0x40280000 , Len : 0x01940000
Erasing, wait ...
Erase done, time : 00:02:01
Write , Start : 0x40280000 , Len : 0x018C0000

then remove cable

waaaw you have dead set in your hand

please don't mind it

[somratjisan]

Another

Core : v2.23 , BB5XG FlashEngine : v10.1

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm872__04.51.mcusw
PPM : rm872__04.51.ppm_s2
CNT : rm872__04.51.image_s2_059Q431
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len : 0x0A
IF xCPUID : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data : 1FB300020303010100FF

Sending EBL Loader ...
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ...
EBL sent Ok
EBL : Quantum_Bootloader_10.53_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 355944050634385
IMEI 2 : 355944050634393
PCcode : 059Q431

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\355944050634385_XG 213_CRT.rpl

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

===Flashing [MCU]===
File : rm872__04.51.mcusw
Image : rm872__04.51.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ...
Erase done, time : 00:00:06
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01800000
Erasing, wait ...
Erase done, time : 00:02:33
Write , Start : 0x40280000 , Len : 0x01800000
Flashing , wait ...
Region flash done, time : 00:00:29
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ...
Erase done, time : 00:00:00
No write data, skip
CRC check passed , 0xECEF

===Flashing [PPM]===
File : rm872__04.51.ppm_s2
Image : package_s2.ppm_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41A80000 , Len : 0x00680000
Erasing, wait ...
Erase done, time : 00:00:31
Write , Start : 0x41A80000 , Len : 0x0051A6DC
Flashing , wait ...
Region flash done, time : 00:00:05
CRC check passed , 0x431E

===Flashing [CNT]===
File : rm872__04.51.image_s2_059Q431
Image : package_s2_059Q431.image.fls
Sec-pack found, sending ...
Sec-pack sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x42100000 , Len : 0x01D20000
Erasing, wait ...
Erase Error, connection lost! Check cable/battery!
Error...
-> Check cable, flashfile, try again from this file

Connect phone on selected interface...


Elapsed: 00:04:31
Connect phone on selected interface...