GSM-Forum - Infinity Nokia [BEST] v2.29 - MTK Nokia Firmware Reader/Maker and more

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- BB5 Easy Service Tool (BEST) Nokia Dongle (https://forum.gsmhosting.com/vbb/f641/)

- - Infinity Nokia [BEST] v2.29 - MTK Nokia Firmware Reader/Maker and more (https://forum.gsmhosting.com/vbb/f641/infinity-nokia-best-v2-29-mtk-nokia-firmware-reader-maker-more-2221432/)

Infinity Nokia [BEST] v2.29 - MTK Nokia Firmware Reader/Maker and more

Infinity Nokia [BEST] v2.29 - MTK Nokia Firmware Reader/Maker and more

- MTKx Flash Engine updated
Automatic "Repair Mode" enable, if device have damaged ROM
Infinity ( Factory-Like ) FW flashing support

- xCNT tool updated
MediaTek tab activated
Allow make firmware for MTK phones from read dump

Supported lines:
Nokia 108: RM-944, RM-945, RM-1124
Nokia 220: RM-969, RM-970, RM-971, RM-1125
Nokia 225: RM-1011, RM-1012, RM-1043
Nokia 130: RM-1035, RM-1036, RM-1037, RM-1122
Nokia 215: RM-1110, RM-1111, RM-1112
Nokia 105: RM-1133, RM-1134, RM-1135
Nokia 222: RM-1136, RM-1137
Nokia 230: RM-1172, RM-1173
Nokia 216: RM-1187, RM-1188
Nokia 150: RM-1189, RM-1190

Result FW is like factory one, which contain all need part to complete reflash or langpack change.

Older models below Nokia 105 are supported as backward compatibility. Almost not required to use.
Main use:
1. Make firmwares for HMD phones which are NOT available YET!
2. MTKx Legacy/HMD models problem solution: read FW from HMD devices (sw11 and newer)
Optional use: Make firmwares with required LANGPACK which are NOT available YET!

- Service operations revised
MTKx: FlahIC detection on flash read improved for some devices
MTKx: Dump reading more faster now
NXP: HW revision verification has made problems for some rare X+ and XL+ models, fixed

- Other
Some bugfixes and improvements at all

MTKx Legacy/HMD models:
Those phones may have 2 version of firmware (old and new sec)
Nokia 150 (it has legacy and hmd version)
Nokia 105, Nokia 130, Nokia 216, Nokia 222, Nokia 230: probably two versions are available
CS problem after flashing may be a result of flashing different version. Just reflash to another one ( SW10: LEGACY, SW11 and newer: HMD )

Lumia/Nokia:
MS will CLOSE WHOLE Windows Mobile support at June 2017.
What will be with servers with firmwares - no one knows, but MS politic is simple - close and forget!
If you have chance, free drive space and good inet: DOWNLOAD ALL NEED FIRMWARES!
There will be NO newer versions anymore other than existing ones.

Download link #1 - Download link #2 - Download link #3

Upload file to Support - Download files via Torrent

Infinity-Box 12 years (2005 - 2017) updates and support as nobody else - News

Twitter - Facebook - Telegram

this is too late but big update for us
thanks infinity team

2 months ago last update. ok no problem thanks for update

Quote:

Originally Posted by kothamamun (Post 12483174)

this is too late but big update for us
thanks infinity team

Quote:

Originally Posted by TATAISONA (Post 12483182)

2 months ago last update. ok no problem thanks for update

Drag-smokers and slowpokes : run away. Go and make idiotic posts somewhere else :)

Don't forget :

Quote:

Lumia/Nokia:
MS will CLOSE WHOLE Windows Mobile support at June 2017.
What will be with servers with firmwares - no one knows, but MS politic is simple - close and forget!
If you have chance, free drive space and good inet: DOWNLOAD ALL NEED FIRMWARES!
There will be NO newer versions anymore other than existing ones.

Not cry after, if you have miss your chance.

Yes this Fw Download will be a problem if not download first in one HD only for this.

Anyway, please why Upload too link 1 and 2 where's full of "Spam Windows"?...

GOOD UPDATE BUT WHY closed windows
mobile support?
here mediafire link:InfinityBox_install_BEST_v2.29

But we still can download existing firmware from best support after 07.2017 or not?

Quote:

Originally Posted by allumts (Post 12483264)

Anyway, please why Upload too link 1 and 2 where's full of "Spam Windows"?...

Looks like for some regions they are not so wild :)
Atleast with adblock work okay. Anyway better place is always support.

Quote:

Originally Posted by allumts (Post 12483264)

Yes this Fw Download will be a problem if not download first in one HD only for this.

Quote:

Originally Posted by magdavuza (Post 12483299)

But we still can download existing firmware from best support after 07.2017 or not?

We uploading files on support and it will work, sure.
But NaviManager can be stopped in any day at this summer. Or not. But it depend only on MS decision, B2X will handle only HMD phones.

Quote:

Originally Posted by kumar008 (Post 12483272)

GOOD UPDATE BUT WHY closed windows
mobile support?

Just google about MS close WindowsMobile bussiness for more info, it not depend on anyone, except MS.

Quote:

Originally Posted by kumar008 (Post 12483272)

GOOD UPDATE BUT WHY closed windows
mobile support?
here mediafire link:InfinityBox_install_BEST_v2.29

Thanks bro....Link 3 Work fine...i've download fast and speed from Link 3.

Br
allumts:)

nice update thank you team ........

InfinityBox BEST v2.29

mediafire link

download

is there any possibility to unlock these mtk phones such as nokia 105 108 and 150?

good update, if its late but good to have it.

Hi, thanks for very importnat update, where i can buy Nokia MTK unlock credit? is that possible to unlock by best dongle? Thanks

Quote:

Originally Posted by raju4u (Post 12483654)

is there any possibility to unlock these mtk phones such as nokia 105 108 and 150?

Quote:

Originally Posted by juned5501 (Post 12483831)

Hi, thanks for very importnat update, where i can buy Nokia MTK unlock credit? is that possible to unlock by best dongle? Thanks

Hello. MTK SP unlock temporary disabled, will back soon.

i am sad that ms will close navimanger just activate best in my cm2 a month ago and i was ....mmm ..i i will be so trouble to download with most wanted models coz of different product code for the same model...ops so tired???

keep it updated

dont be late next time

still no for nokia

and expecting with the new android phones

Quote:

Originally Posted by kumenger (Post 12484048)

It not closed yet. Just download files for your region.
Support ( tracker and support area ) will work and updated with files as well. So, don't worry. But everyone always must rely on himself.

Quote:

Originally Posted by Vahidpappali (Post 12484394)

dont be late next time

Explain me, dear friend, late what?
Previous update was few weeks ago.
Crying about HMD/Legacy problem came near 3 week or month.

Did you made something for make it out faster? Did you up your arse from a sofa to send new sample us? Did you even move a finger to make something, except that stupid comment? Really, just tell. I not understand.

Quote:

Originally Posted by JayDi (Post 12484459)

But everyone always must rely on himself.

thanks inspiring words i will download as much as i can

please add FW version 11.00.11 whit Persian language support!!!

when ekstrak,,, setup file virus detected,,, help

Nokia 20 digit is already or not unlock ?
THANKS FOR GOOD UPDATE

SSChannel : Create SC
SSChannel : Failed to get info!
ErroInfo : Unknown response received from SRV
i cant download sw eno package for lumia 650 rm-1152 any help pls

When should we expect sl3 20 digit back online?

Quote:

Originally Posted by SERA Gasy (Post 12486398)

Nokia 20 digit is already or not unlock ?
THANKS FOR GOOD UPDATE

20 digits service is not available at the moment

Quote:

Originally Posted by roedioezcell81 (Post 12485397)

when ekstrak,,, setup file virus detected,,, help

You should use good antivirus !
Disable antivirus and unpack software.

Quote:

Originally Posted by grace (Post 12488586)

When should we expect sl3 20 digit back online?

20 digits service is not available at the moment

HI,
DEAR SIR,
HOW TO ENTER TEST MODE
Microsoft 650
Phone not in service mode!
Set phone to Test mode first!
Phone require ENO for enter in TEST mode!!!
You can download ENO file in NaviManager tab!

SSChannel : Create SC
SSChannel : Failed to get info!
ErroInfo : Unknown response received from SRV

PLEASE SAY HOW TO DO

Nokia 216 after flash with higher version phone show contact service :(

phone was working good
Software ver : 11.00.11 00-00-00 RM-1187
flash with 12.00.11 but show contact service

Code:

Phone found!

MTKx Nokia Phone detected

Read info... Ok
 
 

Reading Phone Info....

Software ver : 11.00.11 00-00-00 RM-1187

IMEI 1  :      354884087283742

IMEI 2  :      354884087283759

XappVer :      000008F2

Ape Ver :      NEMO G 59cb152c/0 (59cb152c+0) T Mon Jul  1 02:50:44 2013 U 69b804d5

PPM     :      IJ

CNT     :      SUEZ.11.00.11.p1

Product SN   :     FACBF44AU

Product code :     059X807

Base Prd.code:     059X9H2

Module code  :     0207175

Hardware info=======

HWID  : 1101

LCDVer: TPO

Lock info ===========

IMEI       : 354884087283742

IMEI spNet : 3A 45 88 04 78 82 73 24 
 

Conf key     : 800000000004000B

Provider key : 2440700000000000

Country      : Finland

Operator     : NOKIA (Open)
 

Lock info:

Block 1

L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  

Block 2

L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  

Block 3

L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  

Block 4

L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  

Block 5

L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  

Block 6

L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  

Block 7

L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
 

SimLock status : Ok

Security status : Ok
 

Done!
 

Core : v2.29 , MTKx FlashEngine : v14.0
 

Verify files ... 

MAUI : RM-1187_SUEZ_ROM_eMP_12.00.11

VIVA : RM-1187_SUEZ_VIVA_eMP_12.00.11

LANG : RM-1187_SUEZ_LANG_PACK_ROM_IJ_eMP_12.00.11

CUST : RM-1187_SUEZ_CUSTPACK_ROM_IJ_eMP_12.00.11

JMPT : RM-1187_SUEZ_JUMP_TABLE_IJ_eMP_12.00.11

 - > MODE : FullFlash

Software Info:     11.00.11 00-00-00 RM-1187

IMEI:  354884087283742

PPM version :   IJ

Product code:  059X807

Rebooting phone to FlashMode...

Wait for phone...

Phone found! [ 61 ]

Sync...

Sync Ok, read regs...

Inital regs read done

Boot Info : 

BB_CPU_ID : 6260

BB_CPU_HW : CB00

BB_CPU_SW : 0000

BB_CPU_SB : 8000

BB_CPU_NM : [MediaTek] MT6260_S0001

BB_CPU_SN : F9650D5B1E82277FC95D6F99B0C572F6

BROM Protocol Version : 05

BROM Status : 0000

Comm Status : 0000

EXBL Status : Alive [ USB Load Active ]

Switch to BL done

BL Version : 01

Setting...

Setting done , result code 0x8000

Project ID : SUEZ.11.00.11.p1

BROM/BL stage done

Seek and prepare DownloadAgent

DownloadAgent matching HW Found!

DA verify and select done

Sending DA to target ...

DA_eMP_Suez.fg

DA_VERIFY : 00

DA_JUMP   : 00040000

DA_AUTH   : Passed!

DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8B

DA_CSTAT  : 0x5A

SOC_VERIFY : 0xC1

BOOT_STYLE : SF_FLASH_BOOT

NOR Flash IC initialized

[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW

[0] : FLASH_DIE : 00EF 0060 0018 0000 

[0] : FLASH_LEN : 0x01000000

FAT_RANGE : 0x00CE0000-0x00FF3FFF , LEN : 0x00314000

SecureDecrypt : RM-1187_SUEZ_ROM_eMP_12.00.11

SecureDecrypt : RM-1187_SUEZ_VIVA_eMP_12.00.11

SecureDecrypt : RM-1187_SUEZ_LANG_PACK_ROM_IJ_eMP_12.00.11

SecureDecrypt : RM-1187_SUEZ_CUSTPACK_ROM_IJ_eMP_12.00.11

SecureDecrypt : RM-1187_SUEZ_JUMP_TABLE_IJ_eMP_12.00.11

Executing FFS FORMAT now...

FAT_RANGE : 0x00CE0000-0x00FF3FFF , LEN : 0x00314000

DA_RET   : DA_IN_PROGRESS

DA_RET   : FORMAT_DONE

OVRLP : 000069B900000001

PHPID : SUEZ.11.00.11.p1

OVRLP : 00004DF900000001

DA : FORMAT_BIN

Processing Flash Pre-format

FILES : 5

SAFE_BLOCK : 04

FORMAT_BIN : Ok

WRITE_STYLE : DEF : 0x01 (SEQ)

Write : RM-1187_SUEZ_ROM_eMP_12.00.11

Write : RM-1187_SUEZ_LANG_PACK_ROM_IJ_eMP_12.00.11

Write : RM-1187_SUEZ_CUSTPACK_ROM_IJ_eMP_12.00.11

Write : RM-1187_SUEZ_JUMP_TABLE_IJ_eMP_12.00.11

Write : RM-1187_SUEZ_VIVA_eMP_12.00.11

CODE_DNLOAD : Ok

[VERIFY] DONE : RM-1187_SUEZ_ROM_eMP_12.00.11

[VERIFY] DONE : RM-1187_SUEZ_LANG_PACK_ROM_IJ_eMP_12.00.11

[VERIFY] DONE : RM-1187_SUEZ_CUSTPACK_ROM_IJ_eMP_12.00.11

[VERIFY] DONE : RM-1187_SUEZ_JUMP_TABLE_IJ_eMP_12.00.11

[VERIFY] DONE : RM-1187_SUEZ_VIVA_eMP_12.00.11

CODE_VERIFY : Ok
 

Flashing done!

Total flash time : 00:02:54

Reboot phone Ok
 

ReadInfo can't be done! Re-insert battery and power up phone manually
 

Connect phone on selected interface...
 
 

Phone found!

MTKx Nokia Phone detected

Read info... Ok
 
 

Reading Phone Info....

Software ver : 12.00.11 00-00-00 RM-1187

IMEI 1  :      123456789012345

IMEI 2  :      123456789012345

XappVer :      000008F2

Ape Ver :      NEMO G 4122fe8d/1 (00000000+0) T Thu Dec 29 01:31:09 2016 U d61db836

PPM     :      IJ

CNT     :      SUEZ.12.00.11.p1

Product SN   :     FACBF44AU

Product code :     059X807

Base Prd.code:     059X9H2

Module code  :     0207175

Hardware info=======

HWID  : 1101

LCDVer: TPO

Lock info ===========

IMEI       : 123456789012345

IMEI spNet : 0A 00 00 00 00 00 00 00 
 

Conf key     : 0000000000040000

Provider key : 0000000000000000

Country      : Unknown

Operator     : Unknown
 

Lock info:
 

SimLock status : Ok

Security status : Damaged!!!!!
 

Done!

tried both flash files
http://forum.gsmhosting.com/vbb/f641...21/index3.html
how to fix now

Quote:

Originally Posted by syed tuqeer (Post 12489540)

phone was working good
Software ver : 11.00.11 00-00-00 RM-1187
flash with 12.00.11 but show contact service

Code:

Phone found!

MTKx Nokia Phone detected

Read info... Ok
 
 

Reading Phone Info....

Software ver : 11.00.11 00-00-00 RM-1187

IMEI 1  :      354884087283742

IMEI 2  :      354884087283759

XappVer :      000008F2

Ape Ver :      NEMO G 59cb152c/0 (59cb152c+0) T Mon Jul  1 02:50:44 2013 U 69b804d5

PPM     :      IJ

CNT     :      SUEZ.11.00.11.p1

Product SN   :     FACBF44AU

Product code :     059X807

Base Prd.code:     059X9H2

Module code  :     0207175

Hardware info=======

HWID  : 1101

LCDVer: TPO

Lock info ===========

IMEI       : 354884087283742

IMEI spNet : 3A 45 88 04 78 82 73 24 
 

Conf key     : 800000000004000B

Provider key : 2440700000000000

Country      : Finland

Operator     : NOKIA (Open)
 

Lock info:

Block 1

L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  

Block 2

L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  

Block 3

L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  

Block 4

L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  

Block 5

L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  

Block 6

L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  

Block 7

L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
 

SimLock status : Ok

Security status : Ok
 

Done!
 

Core : v2.29 , MTKx FlashEngine : v14.0
 

Verify files ... 

MAUI : RM-1187_SUEZ_ROM_eMP_12.00.11

VIVA : RM-1187_SUEZ_VIVA_eMP_12.00.11

LANG : RM-1187_SUEZ_LANG_PACK_ROM_IJ_eMP_12.00.11

CUST : RM-1187_SUEZ_CUSTPACK_ROM_IJ_eMP_12.00.11

JMPT : RM-1187_SUEZ_JUMP_TABLE_IJ_eMP_12.00.11

 - > MODE : FullFlash

Software Info:     11.00.11 00-00-00 RM-1187

IMEI:  354884087283742

PPM version :   IJ

Product code:  059X807

Rebooting phone to FlashMode...

Wait for phone...

Phone found! [ 61 ]

Sync...

Sync Ok, read regs...

Inital regs read done

Boot Info : 

BB_CPU_ID : 6260

BB_CPU_HW : CB00

BB_CPU_SW : 0000

BB_CPU_SB : 8000

BB_CPU_NM : [MediaTek] MT6260_S0001

BB_CPU_SN : F9650D5B1E82277FC95D6F99B0C572F6

BROM Protocol Version : 05

BROM Status : 0000

Comm Status : 0000

EXBL Status : Alive [ USB Load Active ]

Switch to BL done

BL Version : 01

Setting...

Setting done , result code 0x8000

Project ID : SUEZ.11.00.11.p1

BROM/BL stage done

Seek and prepare DownloadAgent

DownloadAgent matching HW Found!

DA verify and select done

Sending DA to target ...

DA_eMP_Suez.fg

DA_VERIFY : 00

DA_JUMP   : 00040000

DA_AUTH   : Passed!

DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8B

DA_CSTAT  : 0x5A

SOC_VERIFY : 0xC1

BOOT_STYLE : SF_FLASH_BOOT

NOR Flash IC initialized

[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW

[0] : FLASH_DIE : 00EF 0060 0018 0000 

[0] : FLASH_LEN : 0x01000000

FAT_RANGE : 0x00CE0000-0x00FF3FFF , LEN : 0x00314000

SecureDecrypt : RM-1187_SUEZ_ROM_eMP_12.00.11

SecureDecrypt : RM-1187_SUEZ_VIVA_eMP_12.00.11

SecureDecrypt : RM-1187_SUEZ_LANG_PACK_ROM_IJ_eMP_12.00.11

SecureDecrypt : RM-1187_SUEZ_CUSTPACK_ROM_IJ_eMP_12.00.11

SecureDecrypt : RM-1187_SUEZ_JUMP_TABLE_IJ_eMP_12.00.11

Executing FFS FORMAT now...

FAT_RANGE : 0x00CE0000-0x00FF3FFF , LEN : 0x00314000

DA_RET   : DA_IN_PROGRESS

DA_RET   : FORMAT_DONE

OVRLP : 000069B900000001

PHPID : SUEZ.11.00.11.p1

OVRLP : 00004DF900000001

DA : FORMAT_BIN

Processing Flash Pre-format

FILES : 5

SAFE_BLOCK : 04

FORMAT_BIN : Ok

WRITE_STYLE : DEF : 0x01 (SEQ)

Write : RM-1187_SUEZ_ROM_eMP_12.00.11

Write : RM-1187_SUEZ_LANG_PACK_ROM_IJ_eMP_12.00.11

Write : RM-1187_SUEZ_CUSTPACK_ROM_IJ_eMP_12.00.11

Write : RM-1187_SUEZ_JUMP_TABLE_IJ_eMP_12.00.11

Write : RM-1187_SUEZ_VIVA_eMP_12.00.11

CODE_DNLOAD : Ok

[VERIFY] DONE : RM-1187_SUEZ_ROM_eMP_12.00.11

[VERIFY] DONE : RM-1187_SUEZ_LANG_PACK_ROM_IJ_eMP_12.00.11

[VERIFY] DONE : RM-1187_SUEZ_CUSTPACK_ROM_IJ_eMP_12.00.11

[VERIFY] DONE : RM-1187_SUEZ_JUMP_TABLE_IJ_eMP_12.00.11

[VERIFY] DONE : RM-1187_SUEZ_VIVA_eMP_12.00.11

CODE_VERIFY : Ok
 

Flashing done!

Total flash time : 00:02:54

Reboot phone Ok
 

ReadInfo can't be done! Re-insert battery and power up phone manually
 

Connect phone on selected interface...
 
 

Phone found!

MTKx Nokia Phone detected

Read info... Ok
 
 

Reading Phone Info....

Software ver : 12.00.11 00-00-00 RM-1187

IMEI 1  :      123456789012345

IMEI 2  :      123456789012345

XappVer :      000008F2

Ape Ver :      NEMO G 4122fe8d/1 (00000000+0) T Thu Dec 29 01:31:09 2016 U d61db836

PPM     :      IJ

CNT     :      SUEZ.12.00.11.p1

Product SN   :     FACBF44AU

Product code :     059X807

Base Prd.code:     059X9H2

Module code  :     0207175

Hardware info=======

HWID  : 1101

LCDVer: TPO

Lock info ===========

IMEI       : 123456789012345

IMEI spNet : 0A 00 00 00 00 00 00 00 
 

Conf key     : 0000000000040000

Provider key : 0000000000000000

Country      : Unknown

Operator     : Unknown
 

Lock info:
 

SimLock status : Ok

Security status : Damaged!!!!!
 

Done!

tried both flash files
http://forum.gsmhosting.com/vbb/f641...21/index3.html
how to fix now

Check Back Cover near sim Product code : 059X807 find some flash file and flash phone will be ok

@syed tuqeer, flash FW from NaviManager, legacy one.

Quote:

Originally Posted by JayDi (Post 12491475)

@syed tuqeer, flash FW from NaviManager, legacy one.

Hello,
in naviManager show version "10.01.11"

Code:

Connect phone on selected interface...
 

SSChannel : Create SC

SSChannel : SC Created!

ProductID HWCode : RM-1187

Selected Variant : RM-1187 NDT MEA IJ BLACK URDU PK

Firmware Version : 10.01.11

Platform Version : S30+

SSChannel : DC Ok with code 0x06

Switch to IDM now ...
 

IDM initializing, wait...

Checking access to Products folder...

Folder for RM-1187 exist

Prepare done, collect info

So , its safe ?

Read first post. There is all explained.

rm 970 nokia 220 flash problem da run failed pls help

Quote:

Originally Posted by daviofbg (Post 12493619)

rm 970 nokia 220 flash problem da run failed pls help

Battery. Charge or change it.

JayDi
How to solve BEST window closing after I pressed flash button.
Old version of BEST is working well.

Quote:

Originally Posted by Jiminay2000 (Post 12501998)

JayDi
How to solve BEST window closing after I pressed flash button.
Old version of BEST is working well.

Remove all sniffing/port monitoring and usb sharing software.

It's possible to unlock direct Nokia 222 with best? Having the 20 NCK code already.

Quote:

Originally Posted by JayDi (Post 12502323)

Remove all sniffing/port monitoring and usb sharing software.

I killed all suspicious processes but still the same (Best closes after press Flash button).

Nokia RM-1133 Format flash problam

http://i68.tinypic.com/5oxoj7.png

i face this error on nokia 1133 and nokia 108

Quote:

Originally Posted by Jiminay2000 (Post 12504042)

I killed all suspicious processes but still the same (Best closes after press Flash button).

Seems as something left on driver level and that is sniffer.

Quote:

Originally Posted by rmparacha (Post 12504099)

http://i68.tinypic.com/5oxoj7.png

i face this error on nokia 1133 and nokia 108

Reisntall USB drivers, use good short cable without any hub or etc.

Nokia 216 rm-1187 flash after full flash Contact servies..
whats rong?

Quote:

Originally Posted by love_4all (Post 12513492)

Nokia 216 rm-1187 flash after full flash Contact servies..
whats rong?

Read. Read. Read first post :

Code:

MTKx Legacy/HMD models: 

  Those phones may have 2 version of firmware (old and new sec)

   Nokia 150 (it has legacy and hmd version)

   Nokia 105, Nokia 130, Nokia 216, Nokia 222, Nokia 230: probably two versions are available 

  CS problem after flashing may be a result of flashing different   version. Just reflash to another one ( SW10: LEGACY, SW11 and newer: HMD   )