Infinity team help unlovk nokia 6300 rm217 - GSM-Forum

chitawira · 08-13-2014, 23:07

when I try to create lbf fone says go to unlock ,when press unlock it gives error what to do am using best 1.95 see log below

Phone Imei: 358648013400621
Checking locks...
Conf key : 8000000000000000
Provider key : 2341500000000000
Country : United Kingdom
Operator : vodafone UK
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 1

LOCK STATUS :
=============================
BLK : 1
Lock1:Close
=============================
LOCKS : Closed
=============================
PA_SL phone detected... Use "Unlock" button...
Error...!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Unlock procedure started...

job not found
Unlock Error!

Dzirt · 08-14-2014, 01:35

Hello.
You should use SL1/SL2 unlock group, not SL3 server group.

chitawira · 08-14-2014, 05:32

hallo but how will I use the sl1/sl2 when its not activated after read info ,please give the guide lines. Check the attached screen short

sahil2000ind · 08-14-2014, 05:41

USE UFS/JAF TO UNLOCK

WBR
sahil2000ind

chitawira · 08-14-2014, 05:42

CHECKOUT THIS

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia 6300
Software ver : V 06.01 16-01-08 RM-217 (c) Nokia.
IMEI : 358648013400621
XappVer : 0000079E
DSP Ver : 06w14pb_07w39
PPM : V 06.01 16-01-08 RM-217 (c) Nokia. C
CNT : Content: voda_uk_v2 V 06.01 16-01-08 RM-217 (c) Nokia.
Product SN : KCQ403598
Product code : 0546210
Base Prd.code: 0537040
Module code : 0203166
Hardware info=======
HWID : 3007
Retu : 32
Tahvo : 53
Batery: 3393 mV
CMT BT: 06cc-P9.1
Lock info ===========
IMEI : 358648013400621
IMEI spNet : 3A 85 46 08 31 04 60 02
IMEI svNet : 33 85 46 08 31 04 60 12 F5

Conf key : 8000000000000000
Provider key : 2341500000000000
Country : United Kingdom
Operator : vodafone UK
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 1

LOCK STATUS :
=============================
BLK : 1
Lock1:Close
=============================
LOCKS : Closed
=============================
CRT308 Backup Created

SDD key status : Ok
CMLA Key status : Ok
SimLock status : Ok
Security status : Ok
PA_SimLock Version :
PA_SL phone detected

User Code : 12345
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok
CMLA Key status : CMLA key is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------

PA_SimLock Version :
PA_SL phone detected

Done!

Read Uniq key data started...

- > Power Off phone, dissconnect it

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
ASIC ID: 000000010000022600010006010C192101001101
CPU ID : RAP3Gv3 , Features : No any extended features
PUBLIC ID: 1AC00006881D6D56B72AFFA4998E377925AD36F9
ROOT KEY HASH: BAF3A9C3DBFA8454937DB77F2B8852B1

Error, this CPU not supported yet

Fetching failed!

Connect phone on selected interface...

Read fail...!

Connect phone on selected interface...

chitawira · 08-14-2014, 05:43

This cpu not supported anything i can do

Dzirt · 08-14-2014, 05:48

Did you read logs? Seems as not.
Also already answered - you can't do that with USB cable only with 6300 in that case.

Dzirt · 08-14-2014, 05:49

Did you read logs? Seems as not.
Also already answered - you can't do that with USB cable only with 6300 in that case.

08-13-2014, 23:07	#1 (permalink)
chitawira No Life Poster Join Date: Feb 2003 Location: africa Age: 54 Posts: 1,710 Member: 22284 Status: Offline Thanks Meter: 81	Infinity team help unlovk nokia 6300 rm217 when I try to create lbf fone says go to unlock ,when press unlock it gives error what to do am using best 1.95 see log below Phone Imei: 358648013400621 Checking locks... Conf key : 8000000000000000 Provider key : 2341500000000000 Country : United Kingdom Operator : vodafone UK Counters : Key 0 [3] , Fbus 0 [10] Blocks : 1 LOCK STATUS : ============================= BLK : 1 Lock1:Close ============================= LOCKS : Closed ============================= PA_SL phone detected... Use "Unlock" button... Error...! Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Unlock procedure started... job not found Unlock Error!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-14-2014, 01:35	#2 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	Hello. You should use SL1/SL2 unlock group, not SL3 server group.

08-14-2014, 05:41	#4 (permalink)
sahil2000ind No Life Poster Join Date: Apr 2006 Location: INDIA Age: 38 Posts: 5,596 Member: 269044 Status: Offline Sonork: 100.1590584 Thanks Meter: 3,949	USE UFS/JAF TO UNLOCK WBR sahil2000ind

08-14-2014, 05:42	#5 (permalink)
chitawira No Life Poster Join Date: Feb 2003 Location: africa Age: 54 Posts: 1,710 Member: 22284 Status: Offline Thanks Meter: 81	CHECKOUT THIS Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Reading Phone Info.... Connected phone - Nokia 6300 Software ver : V 06.01 16-01-08 RM-217 (c) Nokia. IMEI : 358648013400621 XappVer : 0000079E DSP Ver : 06w14pb_07w39 PPM : V 06.01 16-01-08 RM-217 (c) Nokia. C CNT : Content: voda_uk_v2 V 06.01 16-01-08 RM-217 (c) Nokia. Product SN : KCQ403598 Product code : 0546210 Base Prd.code: 0537040 Module code : 0203166 Hardware info======= HWID : 3007 Retu : 32 Tahvo : 53 Batery: 3393 mV CMT BT: 06cc-P9.1 Lock info =========== IMEI : 358648013400621 IMEI spNet : 3A 85 46 08 31 04 60 02 IMEI svNet : 33 85 46 08 31 04 60 12 F5 Conf key : 8000000000000000 Provider key : 2341500000000000 Country : United Kingdom Operator : vodafone UK Counters : Key 0 [3] , Fbus 0 [10] Blocks : 1 LOCK STATUS : ============================= BLK : 1 Lock1:Close ============================= LOCKS : Closed ============================= CRT308 Backup Created SDD key status : Ok CMLA Key status : Ok SimLock status : Ok Security status : Ok PA_SimLock Version : PA_SL phone detected User Code : 12345 MMC pwd : no any record found UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery] Done! Checking StartUp data ... ----------------------- SDD Key status : SDData is Ok CMLA Key status : CMLA key is Ok SimLock status : SimLock is Ok Security status : Security is Ok ----------------------- PA_SimLock Version : PA_SL phone detected Done! Read Uniq key data started... - > Power Off phone, dissconnect it Dead Mode is Selected Waiting for USB device... --- Insert cable and charger or press phone's power button! --- Connection opened successfully Waiting for communication response... ASIC ID: 000000010000022600010006010C192101001101 CPU ID : RAP3Gv3 , Features : No any extended features PUBLIC ID: 1AC00006881D6D56B72AFFA4998E377925AD36F9 ROOT KEY HASH: BAF3A9C3DBFA8454937DB77F2B8852B1 Error, this CPU not supported yet Fetching failed! Connect phone on selected interface... Read fail...! Connect phone on selected interface...

08-14-2014, 05:43	#6 (permalink)
chitawira No Life Poster Join Date: Feb 2003 Location: africa Age: 54 Posts: 1,710 Member: 22284 Status: Offline Thanks Meter: 81	This cpu not supported anything i can do

08-14-2014, 05:48	#7 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	Did you read logs? Seems as not. Also already answered - you can't do that with USB cable only with 6300 in that case.

08-14-2014, 05:49	#8 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	Did you read logs? Seems as not. Also already answered - you can't do that with USB cable only with 6300 in that case.