Nokia TA-1057 FRP Not Remove BEST2 - GSM-Forum

**>>Gsmmilon>>** · 01-13-2019, 12:38

Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM212)
MODE : PRELOADER PORT
PORT : 212
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

xukca · 01-22-2019, 16:52

Did you manage to remove it?

xukca · 01-22-2019, 17:23

Hold both Volume keys when connecting phone

Yusuf Lawal · 01-22-2019, 22:02

Quote:

Originally Posted by >>Gsmmilon>>

Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM212)
MODE : PRELOADER PORT
PORT : 212
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

http://forum.gsmhosting.com/vbb/f641...best2-2553008/

aszti · 05-22-2019, 12:05

I would like remove frp from ta-1057 but every try after this is error !
Operation : Reset Settings [ v1.16 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
- > Info : Press and hold BOTH volume keys, if device boot fail at BROM stage!

Waiting for device connection ...

PTFN : MediaTek USB Port (COM44)
MODE : BOOTROM
PORT : 44
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : DSLevel : DEV_KEY
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6755
AGENT : Nokia DownloadAgent ver.07220419 BEST2
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256,00 KB ]
DRAM: 0x80000000 [ 2,00 GB ]

EMMC: 150100514536334D42030430D303454F
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QE63MB
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0x3A3E00000 [ 14,56 GB ]

CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : D2FEA22D5320863089A2C3714211765F

DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM57)
MODE : PRELOADER PORT
PORT : 57

Error : Failed to open port!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!
I instal all driver from the support ( nokia hmd ) but not working !
Help my please !
Thank you !

JayDi · 05-23-2019, 10:40

Restart PC and use other USB port.
Make sure drivers setup correct.

Oyetunde Semiu · 05-23-2019, 11:59

Press both volume until the end

Shabbir-Jan · 05-23-2019, 15:36

Card found : 87877E70 , v0122
Infinity-Box BEST Nokia [HMD] Module [NK2] v1.16

Operation : Reset Settings [ v1.16 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
- > Info : Press and hold BOTH volume keys, if device boot fail at BROM stage!

Waiting for device connection ...

PTFN : MTK USB Port (COM26)
MODE : BOOTROM
PORT : 26
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : DSLevel : DEV_KEY
BROM : BOOTROM
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6755
AGENT : Nokia DownloadAgent ver.07220419 BEST2
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: 150100514536334D4203D39AD41F75D5
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QE63MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3A3E00000 [ 14.56 GB ]

CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 3776DB3F3D2007F5EFB6587869052473

DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM71)
MODE : PRELOADER PORT
PORT : 71

Boot done!

Format Ok : USERDATA
Format Ok : RESET PROTECTION
Format Ok : PRIVACY

Done!
Elapsed: 00:00:13

Reconnect Power/Cable!

aszti · 05-24-2019, 11:10

Solved !
I tried many port, once just boot ok, and reset ok ! I think really was driver problem !
Thank you !

zahir24434 · 08-19-2019, 20:36

its possible to change imei this model

01-13-2019, 12:38	#1 (permalink)
>>Gsmmilon>> Product Manager Join Date: Mar 2014 Location: Bangladesh Age: 30 Posts: 2,172 Member: 2142580 Status: Offline Thanks Meter: 1,214	Nokia TA-1057 FRP Not Remove BEST2 Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM (Android) (COM212) MODE : PRELOADER PORT PORT : 212 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM Error : Fail to init protocol! Remove battery, cable. Check cable and connection. Repeat operation! Reconnect Power/Cable!

05-23-2019, 15:36	#8 (permalink)
Shabbir-Jan Junior Member Join Date: Feb 2010 Location: South Africa Posts: 34 Member: 1244698 Status: Offline Thanks Meter: 8	nokia 3.1 FRP don by best2 by v1.16 thnx best team Card found : 87877E70 , v0122 Infinity-Box BEST Nokia [HMD] Module [NK2] v1.16 Operation : Reset Settings [ v1.16 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone - > Info : Press and hold BOTH volume keys, if device boot fail at BROM stage! Waiting for device connection ... PTFN : MTK USB Port (COM26) MODE : BOOTROM PORT : 26 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 TYPE : MODERN RAPHAEL BROM : DSLevel : DEV_KEY BROM : BOOTROM AGENT : Look for suitable BootChain in DA ... AGENT : DEFAULT AUTO AGENT : Found MT6755 AGENT : Nokia DownloadAgent ver.07220419 BEST2 BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : BROM DA : EXT_RAM NOT initialized! EMI : EXT_RAM CFG Passed! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256.00 KB ] DRAM: 0x80000000 [ 2.00 GB ] EMMC: 150100514536334D4203D39AD41F75D5 EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : QE63MB EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0x3A3E00000 [ 14.56 GB ] CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 3776DB3F3D2007F5EFB6587869052473 DA : USB : FULL-SPEED DA : USB : Change Port Speed PTFN : MediaTek DA USB VCOM (Android) (COM71) MODE : PRELOADER PORT PORT : 71 Boot done! Format Ok : USERDATA Format Ok : RESET PROTECTION Format Ok : PRIVACY Done! Elapsed: 00:00:13 Reconnect Power/Cable!

01-22-2019, 16:52	#2 (permalink)
xukca Freak Poster Join Date: Oct 2010 Location: Europe Posts: 407 Member: 1429766 Status: Offline Thanks Meter: 85	Did you manage to remove it?

01-22-2019, 17:23	#3 (permalink)
xukca Freak Poster Join Date: Oct 2010 Location: Europe Posts: 407 Member: 1429766 Status: Offline Thanks Meter: 85	Hold both Volume keys when connecting phone

05-22-2019, 12:05	#5 (permalink)
aszti Major Poster Join Date: Feb 2008 Posts: 45 Member: 714472 Status: Offline Thanks Meter: 6	I would like remove frp from ta-1057 but every try after this is error ! Operation : Reset Settings [ v1.16 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone - > Info : Press and hold BOTH volume keys, if device boot fail at BROM stage! Waiting for device connection ... PTFN : MediaTek USB Port (COM44) MODE : BOOTROM PORT : 44 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 TYPE : MODERN RAPHAEL BROM : DSLevel : DEV_KEY BROM : BOOTROM AGENT : Look for suitable BootChain in DA ... AGENT : DEFAULT AUTO AGENT : Found MT6755 AGENT : Nokia DownloadAgent ver.07220419 BEST2 BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : BROM DA : EXT_RAM NOT initialized! EMI : EXT_RAM CFG Passed! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256,00 KB ] DRAM: 0x80000000 [ 2,00 GB ] EMMC: 150100514536334D42030430D303454F EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : QE63MB EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0x3A3E00000 [ 14,56 GB ] CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : D2FEA22D5320863089A2C3714211765F DA : USB : FULL-SPEED DA : USB : Change Port Speed PTFN : MediaTek DA USB VCOM (Android) (COM57) MODE : PRELOADER PORT PORT : 57 Error : Failed to open port! Error : Fail to init protocol! Remove battery, cable. Check cable and connection. Repeat operation! Reconnect Power/Cable! I instal all driver from the support ( nokia hmd ) but not working ! Help my please ! Thank you !

05-23-2019, 10:40	#6 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Restart PC and use other USB port. Make sure drivers setup correct.

05-23-2019, 11:59	#7 (permalink)
Oyetunde Semiu No Life Poster Join Date: Feb 2018 Location: Nigeria Posts: 1,461 Member: 2812901 Status: Online Thanks Meter: 493	Press both volume until the end

05-24-2019, 11:10	#9 (permalink)
aszti Major Poster Join Date: Feb 2008 Posts: 45 Member: 714472 Status: Offline Thanks Meter: 6	Solved ! I tried many port, once just boot ok, and reset ok ! I think really was driver problem ! Thank you !

08-19-2019, 20:36	#10 (permalink)
zahir24434 Insane Poster Join Date: May 2014 Location: south africa Posts: 62 Member: 2179676 Status: Offline Thanks Meter: 1	its possible to change imei this model