lumia 930 wp8.1 firmware - GSM-Forum

Lux_hmobile · 12-18-2017, 14:13

Hi
I having problem whit this lumia 930. The phone had software problem before than i desided to reflash it. All went good phone back to working condition, accept store app.
When i open the store and try to download something the log in screen not comes up. Only error message (80070054) than is close it self.
I tried whit 3 firmwares but same problem come up? My question is how can i update this phone to win 10 whit out using store app?
Is it possible to download and flash directly the win 10 firmware?
Thank you for anybody!

Waiting for phone...
Dead mode is selected , no phone in normal mode found
1. Press and hold "Volume Down"
2. Insert USB cable
3. Hold button until phone will be detected

Device catched in BOOT mode!
Boot Mode confirmed!
Setting Preloder
Collect Info...
Setting Application
Setting Secure
Collect Info...
=== Nokia Flash App info :
Protocol Version : 2.34
Protocol Implementation : 2.59
=== Phone Initial info :
Phone RMxxx ID : RM-1045
Phone Model ID : Nokia.MSM8974.P6180.2.2
Phone Model PC : 059W2S7
Phone IMEI : 353633066747180
=== eMMC info :
eMMC Vendor : Samsung
eMMC CID : 0015
eMMC Size : 29820 MiB
=== Security Initial info :
Security Status : 010100000101
Secure Boot : Enabled
Secure eFUSE : Enabled
JTAG : Disabled
RDC Key : Not Present (Retail)
UEFI SBoot : Enabled
SecHW Key : Exists
Device RootKey : 800EEB508F7BBDF12A19262621FD837297A3B062
=== Other info :
SD present : False

Full Check skipped , will be checked by ImageSignature

Battery Level : 85%
RPMB Provision Status Code : 0x0101
Device RAM size : 2048 MiB
Device not have ATRP
Backup to RAM Ok!

FFU : RM1045_02540.00019.15234.50007_RETAIL_prod_signed_ 1054_0274A9_000-33_MV.ffu
Flashing FFU
Sending FFU Header CertData
Header sent , accepted

Perform Data Partition Erase
Erase done
Sending FFU Payload Data...
Finishing flashing

Flashing done!
Green Light

Image Sent, processing PostFlash
FinalConfig : abnormal status, error code : 0xFF7B0000
Make Factory Set : Ok
Restore RAMBkp : Ok
Update ProductCode to : 059W2S7
ProductCode update Done!
Update NVI from Image
Ok , NVI will be updated on first boot!
PostFlash Finished

Total flash time : 00:04:26

Rebooting

Connect phone on selected interface...

JayDi · 12-18-2017, 15:06

Hello. If WP10 fw available for thos device as ffu file - you can flash it.

Lux_hmobile · 12-28-2017, 22:07

Hi
Problem is sloved by changing language and region on the phone.
Thanks

12-18-2017, 14:13	#1 (permalink)
Lux_hmobile Freak Poster Join Date: Nov 2011 Posts: 268 Member: 1698387 Status: Offline Thanks Meter: 43	lumia 930 wp8.1 firmware Hi I having problem whit this lumia 930. The phone had software problem before than i desided to reflash it. All went good phone back to working condition, accept store app. When i open the store and try to download something the log in screen not comes up. Only error message (80070054) than is close it self. I tried whit 3 firmwares but same problem come up? My question is how can i update this phone to win 10 whit out using store app? Is it possible to download and flash directly the win 10 firmware? Thank you for anybody! Waiting for phone... Dead mode is selected , no phone in normal mode found 1. Press and hold "Volume Down" 2. Insert USB cable 3. Hold button until phone will be detected Device catched in BOOT mode! Boot Mode confirmed! Setting Preloder Collect Info... Setting Application Setting Secure Collect Info... === Nokia Flash App info : Protocol Version : 2.34 Protocol Implementation : 2.59 === Phone Initial info : Phone RMxxx ID : RM-1045 Phone Model ID : Nokia.MSM8974.P6180.2.2 Phone Model PC : 059W2S7 Phone IMEI : 353633066747180 === eMMC info : eMMC Vendor : Samsung eMMC CID : 0015 eMMC Size : 29820 MiB === Security Initial info : Security Status : 010100000101 Secure Boot : Enabled Secure eFUSE : Enabled JTAG : Disabled RDC Key : Not Present (Retail) UEFI SBoot : Enabled SecHW Key : Exists Device RootKey : 800EEB508F7BBDF12A19262621FD837297A3B062 === Other info : SD present : False Full Check skipped , will be checked by ImageSignature Battery Level : 85% RPMB Provision Status Code : 0x0101 Device RAM size : 2048 MiB Device not have ATRP Backup to RAM Ok! FFU : RM1045_02540.00019.15234.50007_RETAIL_prod_signed_ 1054_0274A9_000-33_MV.ffu Flashing FFU Sending FFU Header CertData Header sent , accepted Perform Data Partition Erase Erase done Sending FFU Payload Data... Finishing flashing Flashing done! Green Light Image Sent, processing PostFlash FinalConfig : abnormal status, error code : 0xFF7B0000 Make Factory Set : Ok Restore RAMBkp : Ok Update ProductCode to : 059W2S7 ProductCode update Done! Update NVI from Image Ok , NVI will be updated on first boot! PostFlash Finished Total flash time : 00:04:26 Rebooting Connect phone on selected interface...

12-18-2017, 15:06	#2 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Hello. If WP10 fw available for thos device as ffu file - you can flash it.

12-28-2017, 22:07	#3 (permalink)
Lux_hmobile Freak Poster Join Date: Nov 2011 Posts: 268 Member: 1698387 Status: Offline Thanks Meter: 43	Hi Problem is sloved by changing language and region on the phone. Thanks