MediaTek Tab Functions in 1.93 Not Work - GSM-Forum

seakrokram · 07-22-2014, 15:32

i have 108 with user code Failed to remove it with 1.93

here log
Connect phone on selected interface...

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Device boot not done
Check Drivers
Try again

Connect phone on selected interface...

but Succeed with 1.92

Code:

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 60 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0001
BB_CPU_SN : 96DACE02477E28224298A2D554440A83
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x000E
Project ID : Bree.20.06.11.p4
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Bree.fg
DA_VERIFY : 00
DA_JUMP   : 00040000
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00DB , [MX] MX25U3235E
[0] : FLASH_DIE : 00C2 0025 0036 0000 
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A6000-0x003F3FFF , LEN : 0x0004E000
Data prepared!
First Step Done, Now Re-connect power/cable!
Wait for phone...
Phone found! [ 60 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0001
BB_CPU_SN : 96DACE02477E28224298A2D554440A83
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x000E
Project ID : Bree.20.06.11.p4
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Bree.fg
DA_VERIFY : 00
DA_JUMP   : 00040000
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00DB , [MX] MX25U3235E
[0] : FLASH_DIE : 00C2 0025 0036 0000 
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A6000-0x003F3FFF , LEN : 0x0004E000
Code set to default : 12345
Done!

please fix it

seakrokram · 07-23-2014, 13:49

help me team ........

sopla4ever · 07-23-2014, 22:58

Relax, take it easy, I'm sure Dzirt already working on solution for this problem, just wait few days for new release, it will bring something hot

Dzirt · 07-24-2014, 14:26

Problem is new and old drivers.

I add other way of detect. Will add both at same time. Sadly, but , seems as much users don't want think and read - will make it fast.

sopla4ever · 07-24-2014, 17:12

Hello Dzirt, I've already installed new drivers on my XP. When I select driver manual, as compatible device is show only those two drivers:
- Nokia USB Serial Port (v1.0.0.1)
- MediaTek PreLoader USB VCOM Port (v1.1123.0.0)

I think there are old drivers. Are you sure if new drivers are compatible with ancient XP?
If yes, then can you upload drivers just like .inf + .sys?

Dzirt · 07-24-2014, 17:41

sopla4ever , if you have any non-connecting MTK phone - pm me, will check it.
Need have phone on hands during test. It take 1 minute.

07-23-2014, 13:49	#2 (permalink)
seakrokram Freak Poster Join Date: Feb 2010 Posts: 174 Member: 1228517 Status: Offline Thanks Meter: 39	help me team ........

07-23-2014, 22:58	#3 (permalink)
sopla4ever Freak Poster Join Date: Aug 2012 Location: LC Posts: 270 Member: 1793281 Status: Offline Thanks Meter: 167	Relax, take it easy, I'm sure Dzirt already working on solution for this problem, just wait few days for new release, it will bring something hot

07-24-2014, 14:26	#4 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	Problem is new and old drivers. I add other way of detect. Will add both at same time. Sadly, but , seems as much users don't want think and read - will make it fast.

07-24-2014, 17:41	#6 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	sopla4ever , if you have any non-connecting MTK phone - pm me, will check it. Need have phone on hands during test. It take 1 minute.